SO THAT'S WHY IT WORKS. Thanks for sharing, I never understood that it's just bumping the pins out of the way until the lock can be turned. Thanks!
@NickMoore
7 жыл бұрын
Glad you liked it, thanks!
@x9x9x9x9x9
7 жыл бұрын
This is something I never thought about wanting to see in slow mo but I am glad I did. As a fan of "locksport" and amateur hobbyist I found this video to be amazing.
@NickMoore
7 жыл бұрын
I'm surprised that it took me this long to think of filming a bump key. I have been making them for almost a decade and never thought to do anything with the idea.
@JimGriffOne
7 жыл бұрын
I once had to break into my own building. Long story short, the housing organisation decided not to give me a key to the main front/rear entrances because I didn't sign their updated tenancy agreement which was quite Orwellian. Suffice it to say, I learned how to pick locks using homemade tools and also learned how to "listen" to mechanical keypad locks to crack the codes. It was a great skill to have!
@NickMoore
7 жыл бұрын
+Jim Griffiths The apartment I had in NZ was like that, they always wanted to know when you were in and out of the building. What did material did you use for your picks? I'd love to see/hear how it's possible to crack the push button locks, I have only had a little experience with them.
@JimGriffOne
7 жыл бұрын
For the main locks, I believe I used a piece of stainless steel from something (can't remember what). It was strong enough to put tension on the lock as I used a small, bent jeweler's screwdriver to pick with. I had to anneal the screwdriver so it didn't snap like the first one did! For the push button lock, it had a reset button which I held carefully with a small amount of force, just enough to latch onto the mechanism when buttons were pressed. When the correct buttons were pressed, it made an extremely fast double click sound, too fast for the untrained ear to hear. I'd say probably less than 5ms between clicks. The non-enabled buttons just made a single click. Since I'm a sound engineer, it's easy to hear things like that. I kept resetting it until I had gone through each number and made a mental note of which buttons were enabled for the locking mechanism. EDIT: The button lock was a small key safe, which I found out was easier to use once I cracked the code, since they always put spare keys in there that fit the front door haha.
@NickMoore
7 жыл бұрын
I'm going to have to get my hands on a push button lock, that sounds like a great little hack, thanks!
@zhengqunkoo
7 жыл бұрын
that is some talent right there
@Dragonyy-sb51
10 ай бұрын
your housing organization sucks ngl
@SaintHunterWebb
6 жыл бұрын
My first time practicing this I onced it.. got it my first try and ever since then I have been practicing everyday perfecting it.. I completed myfirst lockout job with the bump technique and the people were in awe lol
@SHREKfiona1234
2 жыл бұрын
this is the best video ive watched, short, simple, to the point with all you really need to get started. and slow mo of how it works.........great video
@NickMoore
2 жыл бұрын
Thanks!
@MarcoJesusPerez
Жыл бұрын
Short and sweet, good script, and not a lot of yelling and obnoxious behavior. I like this video a lot. Going to check out your other videos.
@NickMoore
Жыл бұрын
Thanks, glad you liked it!
@Uncle_Buzz
7 жыл бұрын
I've been subbed to Lock Picking Lawyer and bosnianbill for a long time. Yet another interest for which I never have time! Cheers, Chris.
@NickMoore
7 жыл бұрын
I only had a brief interest in lock picking but it's a skill you don't really loose, I have had to pick a few locks at various jobs to get into rooms after someone has lost the keys. It's a cheap hobby too until you get into high security locks.
@NickMoore
7 жыл бұрын
+metalhead2508 It's like knowing how to start a fire without matches or building a supersonic ping pong ball cannon, it's not really practical or useful but it makes a great party trick. I had to go digging to find my old picks and it was really fun to see inside a lock while manipulating the pins, I would do a picking video but there are loads of better videos on the subject made by pros.
@x9x9x9x9x9
7 жыл бұрын
BosnianBill has such an odd group of subscribers. I swear everyone has seen at least one of his videos. I subbed to him probably 4 years ago (could be longer) and just recently got my first good set of picks.
@bhoiiii
7 жыл бұрын
Great video - I'd love to see even more slow motions shots. Great stuff, as usual.
@Fake_Blood
7 жыл бұрын
I had a vague idea about how this worked but to actually see it is something else.
@NightHoundd11
3 жыл бұрын
I always knew that my life purpouse is to become a thief . Thanks dude .
@charlesklein7232
6 жыл бұрын
the lock-sport has grown incredible in the last few years. if you check on the dates you will find it all happened in the last 3 to 5 years. i wonder if it has something to do with the economy. everybody is picking locks!
@LoneBrowncoat
5 жыл бұрын
What if the cylinder is installed upside down? So that the key pins are always pulled down by gravity and the driver pins never really get to 'jump' ?
@Chancho_Villa
2 жыл бұрын
I believe gravity isn't much of a factor due to the spring loaded pins providing a pretty constant force no matter what the orientation of the lock is.
@brainanator
7 жыл бұрын
Great explanations and awesome demonstrations to go with. Thanks for sharing.
@NickMoore
7 жыл бұрын
Glad you liked it!
@ContingencyLabs
5 жыл бұрын
This is a fantastic educational resource--thanks for posting!
@NickMoore
5 жыл бұрын
Glad you liked it!
@zetaliner
7 жыл бұрын
Hi Houdini. Nice job Nick, as always
@NickMoore
7 жыл бұрын
Thanks!
@zhengqunkoo
7 жыл бұрын
Didn't even know that was possible! Just goes to show there are many ways to circumvent security.
@joonasfi
5 жыл бұрын
Nick, you have super interesting content! Please don't stop, keep being you :)
@bernardhaegeman8489
10 ай бұрын
When you keep a euro cilinder upside down, why don't fall down the keypins who don't have a spring ? Thank you.
@stuartcookie133
6 жыл бұрын
Gonna try this on my wifes chastity belt tonight!! Oh yeah!!
@MyShopNotes
7 жыл бұрын
Cool, never heard of that before. Will need to try it if I ever lose a key.
@NickMoore
7 жыл бұрын
As long as you have a key from the same manufacture/model it only takes 20min to make an equivalent bump key.
@BeckyStern
7 жыл бұрын
Very interesting, thank you!
@NickMoore
7 жыл бұрын
You're very welcome, it only works on a few types of locks but they happen to be the most popular types in North America.
@ciderfan823
3 жыл бұрын
Does this technique work for door locks and deadbolts also?
@Si-Al-Ti
7 жыл бұрын
you're a genuinely cool guy, nick!
@NickMoore
7 жыл бұрын
+kungmat Thanks, I'll try to keep it up!
@waynep343
6 жыл бұрын
how to set up a lock that can't be picked or bumped.. i.imgur.com/rTIsdIb.jpg silicone oring section becomes a spring .. when cut to a length that makes it really hard to get the top pin to the shear line it makes locks bump proof and also pick proof as there is no way to lift the last pin to the shear line with a pick that deep in the lock. on the double ended cylinders used in so many european locks. you only have to do one end if you recall which one you did. this does not work with old Kwiksets as the oring section forces the spring retainer off. try it.. prove me wrong.
@DonnieDarko1
7 жыл бұрын
😊
@dakine4238
2 жыл бұрын
It's not working:(
@kubeek
7 жыл бұрын
Come on Nick, you are not going to get more people watching your quite great videos if you keep such interesting topics just a minute and half short. Since you got a good camera, you should show how some of the pins settle in the correct position, and some need another bump. 5-7 minutes at least, and you will get much more viewers :)
@kubeek
7 жыл бұрын
I thoroughly understand that this is for you a just enough explanation and everything after that is trivial, but not too many people are on the same side, so you really need to get into the "simple explanation" stuff if you want more pople to watch you
@NickMoore
7 жыл бұрын
+kubeek Video length is one of the things about which I am never sure. When I go over 3 min I can cover everything on a topic but viewership drops off very quickly around the 2 minute mark. Anything I say or show after that only gets seen by half the viewers or less. But I do agree that longer videos that go more in-depth are much more satisfying.
@ibsn87
4 жыл бұрын
The reason I watched this video is because I wanted to understand what was lock bumping and it was summarised in 2 mins not 15. So not sure I agree with this comment.
@melodyvalentine8779
2 жыл бұрын
@@ibsn87 Same, I didn't want to sit through 15 mins of talking when I just wanted to see how it works. There was a few videos but I chose the shortest one I saw and it was perfectly fine, now I know how bump keys work.
@tanksta15
7 жыл бұрын
What's going on...not one dislike?! Where are the haters?
@NickMoore
7 жыл бұрын
+Anthony Carreon I bored them all to death years ago.
@pyrohhs12
7 жыл бұрын
SO THAT'S WHY IT WORKS. Thanks for sharing, I never understood that it's just bumping the pins out of the way until the lock can be turned. Thanks!
Пікірлер: 53