I feel like I'm getting a free education on locksmithing with every video I watch. I can't tell you how much I appreciate it.
@clksupplies
3 жыл бұрын
Thank you-PJ
@502deth
4 жыл бұрын
you kind of danced around it with the kwikset demo, but i was waiting for you to mention that the maximum discrepancy for the .003 set is .001", while it is .002" for the .005" kit. example: say a 003 kit has an 080 and a 083. if you need 080, right on, 081, a 080 is off by 001, a 082, the 083 is of by 001, and a 083 your right on. =001 max deviation in contrast to , say an 080 and 085, where a 082 and 083 would both be off by .002" with a 080 and 085 respectively.
@clksupplies
4 жыл бұрын
Hi deth502, Thanks for the comment. I could have been more clear about that! - PJ
@lmars5933
4 жыл бұрын
Absolutely great video great information my friend. 🌟⭐🌟⭐🌟😎
@clksupplies
4 жыл бұрын
Thanks! -PJ
@yrtuag
4 жыл бұрын
Great info 👍 Appreciate the knowledge you've been sharing. Thanks, P.J. 👍😎🤠🇺🇸
@clksupplies
4 жыл бұрын
Thanks Jim! -PJ
@yrtuag
4 жыл бұрын
@@clksupplies You're welcome sir 🤠
@51-FS
4 жыл бұрын
Thanks for this video.... u answered a lot of questions
@clksupplies
4 жыл бұрын
Thanks- PJ
@lokpikr999
4 жыл бұрын
Get a load of this.I once worked at a lock shop, and sometimes the pins from the kit(Which was very old and therefore likely used .005 increments)were so off(i.e. too low), that they’d actually replace the drivers with bottom pins(Point facing down)in the respective chambers so as to compensate for the difference and allow the key to function!
@clksupplies
4 жыл бұрын
oh, wow! I've heard of that being done but not as a "normal" practice. -PJ
@hadler999
4 жыл бұрын
Thanks P.J., always learn somthing
@clksupplies
4 жыл бұрын
Thanks! -PJ
@37Iulian
Жыл бұрын
God bless you, PJ!
@en2oh
2 жыл бұрын
very well done! one question though.... are the diameters of all these pins (OEM and universal) the same? Are they the same in both North America AND Europe? Are they all brass or are there Nickel Silver bottom pins available? The devil is in the details! Thanks anyone for your comments!
@clksupplies
2 жыл бұрын
Yes diameter is the Sam one and aftermarket for USA not sure about Europe -PJ
@lastgameplay
4 жыл бұрын
Thank you for this, very informative
@clksupplies
4 жыл бұрын
Thanks - PJ
@agucordagucord1658
4 жыл бұрын
Thank You!!
@stevestolarczyk8972
3 жыл бұрын
Thank you for this. I’ve been seeing both versions offered for sale, but never any explanation of the difference.
@clksupplies
3 жыл бұрын
Glad you liked it! -PJ
@polarbear7334
Жыл бұрын
Good to know, the differnces. #Lockboss
@jackarmer8560
4 жыл бұрын
Great Job PJ Keep it up
@clksupplies
4 жыл бұрын
Thanks Jack- PJ
@markcall9695
4 жыл бұрын
Really understandable now! 3 is the way I am going! Thanks PJ! :) #LockBoss
@clksupplies
4 жыл бұрын
Yes! .003 is the way to go 100% of the time in my opinion. -PJ
@aperson9495
Жыл бұрын
Personally, I prefer to have brand specific pinning kits as much as possible, and really like the SPI kits you sell. Also not a fan of color coded pins. Yes, it makes it easier to ID what pin is what just on color, like, as you mentioned, if you dropped a pin into an adjacent bin by accident, but, and I know this is a bit of a stretch, someone with a little knowledge, time (a few minutes), light, paperclip and a good eye could POSSIBLY decode the bitting by looking at the colors of the pins. I didn't try too hard and was able to make out several colors through the keyway.
@AG-um9xi
3 ай бұрын
Great video I learned a lot thank fo all your detailed information #lockboss
@jeffmoss26
4 жыл бұрын
ah yes, the most common locksmith argument besides which lubricant to use. the simple answer is: use what your boss pays for :)
@clksupplies
4 жыл бұрын
You got a point!
@BronxLockPicker60Rodriguez
4 жыл бұрын
That's right Moss Man!
@jessefranco9053
9 ай бұрын
Chensky likes the .005 for some reason.
@vernondollhopf3249
4 жыл бұрын
Good information would like a chart showing the differences of the other lock pin as you showed for Kwikset. #lockboss
@clksupplies
4 жыл бұрын
Vernon - thanks for the feedback, I'll see what I can do. -PJ
@twinturboyan
4 жыл бұрын
wow. Great Info. Thank U. Anyone want to buy three .005 kits? lol
Пікірлер: 39