Great video but I have a question. I’m replacing the upper and lower intake gaskets on my 3.8 (3800) and someone said I need loctite on the intake manifold bolts? I would have thought a thread sealer would be needed. Can you clarify or shed some light on this? Thank you.
@ericmckinley368
Жыл бұрын
Can I ask what product you would recommend for an oil plug on the bottom of a classic car engine, it is conical in shape and has a copper washer also to stop leaks. I do tighten the large plug but when the car gets to a working temperature and the oil flows thinner I do get a little drip from the plug. It must be coming down through the threads.
@kellismith4329
Жыл бұрын
You should change the washer, they say every time but I get a few changes out of one
@DundoMarinko
7 жыл бұрын
Thank you I did not know all this diferent combination now my window of opportune is open much better .
@l.glucid9077
6 жыл бұрын
I need to fix my driving glasses... one of my arm broke off. Can I use locktite? if yes, ... which one? Thanks.
@EditioCastigata
6 жыл бұрын
Depends on the material, but you'd use one of the glue ones, like 406.
@aliahmadbilal666
3 жыл бұрын
Do you anything that can be used to press in engine liner please?
@Engineerboy100
8 жыл бұрын
What's the highest temperature rated material that you offer? thanks. I'm trying to make an aluminum casting mold.
@soli.deo.gloria
8 жыл бұрын
200 F LOCTITE PC 3466 - Part #974532000F LOCTITE MR 2000- Part# 235579
@soli.deo.gloria
8 жыл бұрын
2nd part# is 2000F
@RoboTekno
10 жыл бұрын
Very Informative. Is there a video with Loctite Adhesives?
@andrewjackson7476
8 жыл бұрын
+RoboTekno Anybody know what is used to lock a loose pinion gear to a small hobby electric motor?
@soli.deo.gloria
6 жыл бұрын
Call 1-800 Loctite
@andrewjackson7476
8 жыл бұрын
Anybody know what is used to lock a loose pinion gear to a small hobby electric motor?
@umakmak7670
7 жыл бұрын
what is the best product to lock cnc stepper motor Pulley to the motor, there are two little screws that keep loosening due to vibration?
@MrMagichobo21
3 жыл бұрын
3 years late but yoh will want to use either purple low strength (if the screws need to be removed regularly for maintenance or service) or 242 medium strength (it's called medium strength but on really small screws you should think of it as permanent)
@njagi2010
8 жыл бұрын
i want to attach two screws end to end to make one long screw(1m long) which is not available in shops can i use loctite.I do not to weld the rods because that will destroy the threads.Can i use loctite?
@andrewjackson7476
8 жыл бұрын
+my self Anybody know what is used to lock a loose pinion gear to a small hobby electric motor?
@royreynolds108
8 жыл бұрын
+Andrew Jackson I would try Loctite red or JB WELD or another epoxy.
@Engineerboy100
8 жыл бұрын
why not use all thread and nuts?
@timothythomas1345
8 жыл бұрын
I recently seen a test and locktight metal came out the best .Between a lot of competitors . What is best for gunsmithing or firearms for threads .
@andrewjackson7476
8 жыл бұрын
+timothy thomas Anybody know what is used to lock a loose pinion gear to a small hobby electric motor?
@timothythomas1345
8 жыл бұрын
Let me guess the harbor freight dremel tool ? I have had three and all three and two different models . And all three had the button come off right after I bought them .
@soli.deo.gloria
8 жыл бұрын
222MS for screws 1/4" or smaller, 243 above that.
@timothythomas1345
8 жыл бұрын
Thanks God Bless
@rogersiples3335
3 жыл бұрын
Use carbonized brake fluid to debond also acetone.
@ClownWhisper
6 жыл бұрын
2000 people are going to fill their engine block blind holes with Dawn dish soap because you didn't explain what you were doing.
@krajsek123456
3 жыл бұрын
The pressurised thread thing didn't realy work well. You can hear the gas leaking from thread. Good presentation till that point. That was a turnoff. Made me loose trust in the person.
Пікірлер: 29