In this video, I demonstrate the following: 1. How to create and use Folder Stacks. 2. How to create and use Summing Stacks. 3. How to use Summing Stacks for bus processing. 4. How to use Summing Stacks to layer software instruments. 5. How to flatten track stacks. Support the sponsor of this video, Boombox | bit.ly/boomboxsponsor For mixing/mastering work, contact me at my website | carneymediagroup.com Follow MusicTechHelpGuy on Instagram | instagram.com/musictechhelpguy Support the channel on Patreon | patreon.com/musictechhelpguy Demo project used in this video | www.logicproguide.com/downloads Timestamps: 0:00 Introduction 0:31 Sponsor Segment 1:11 Folder Stacks 4:15 Flatten Folder Stacks 4:49 Summing Stacks 8:58 Drum Bus EQ & Compression 11:24 Acoustic Guitar Bus Compression 13:18 Flatten Summing Stacks 14:03 Layering Software Instruments 15:49 Transposer & Tremolo Effects
@DanMia-cd1bm
Ай бұрын
It's over again and again and again..just one great learning experience followed by another....thank you
@happysuperman4649
Жыл бұрын
Thank you ! Unlike other YT tutorials , your instructions are more clearly and straight forward !
@kpmtwo
Жыл бұрын
LOVE the software layering part at the end. Mind blown
@soundguydon
Жыл бұрын
I'm loving this whole series. So much information! Some stuff I knew, some stuff I didn't -- and some stuff I *thought* I knew. Thanks for sharing !
@ArtmanBass
Жыл бұрын
Great explanation of folders and stacks. Now I see them as an alternative to VCAs and Busses.
@ajadrew
Жыл бұрын
I need this video - never got track stacks together - thank you 👍🙂
@cameronpatrickscott
Жыл бұрын
Super useful, wow what a series!
@manewry66tw
Жыл бұрын
Post/pre pan/fader a bit confusing sometimes (I never worked with physical mixer) but together with track stacking it opens a whole new world of possibilities.
@bassManDavis1953
Жыл бұрын
Love the idea of exploring the track stacks with different software instruments! Instant synth? Never knew about this so thank you for a brilliant piece of tuition.
@Duskybuka
8 ай бұрын
Perfect explanation, exactly what I was looking for. Thank you for taking the time to produce these amazing tutorials :)
@rajat_vaid
6 ай бұрын
You're helping and inspiring many people.. keep up the good work.. love from India ❤
@andy-pandyman
Жыл бұрын
Great series so far, helps recap what my leaky memory has lost, and quite a bit of new stuff, cheers Music TechHelpGuy 🎵
@richyr777
Жыл бұрын
This was the exact information I was searching for. Thanks heaps for the video!
@kickinflix5588
8 ай бұрын
I like your style. Really good teaching. Thanx.
@monstri50
Жыл бұрын
You’re the best, always. Thanks for the help!!
@rajivmusic9519
7 ай бұрын
very useful
@vewilli
Жыл бұрын
Thank you so much for this video which provides me with a lot of new knowledge … #30 already waits for me. 👍🏻
@joseferro1432
11 ай бұрын
Excellent Video! Thanks.
@HishamKhalaf1
Жыл бұрын
Thank you. Clear Explanation.
@vk-music22
Жыл бұрын
thankyou sir
@team.logicpro
Жыл бұрын
You rock!
@MarshallVeeMarshall
5 ай бұрын
lit 🕯
@thewhitbyfox
Жыл бұрын
Excellent. Thanks.
@micahskerrett9509
9 ай бұрын
Thank you. A summing stack is good to use rather than just routing tracks to a normal bus
@starfishandroid
6 ай бұрын
Why?
@zsoltg
Жыл бұрын
Great video as always! Thank you 🙏
@sybamunki
Жыл бұрын
Great tip re recording midi on a summed track!
@gwsound
Жыл бұрын
thanks, good video.
@haroldbaker555
3 ай бұрын
Hey Josh, just wondering where you got those super nice pads + arp at the end of the video. Thank you.
@conduets4939
3 ай бұрын
What if you have different types of bass (acoustic, synth etc) that come in at different times but you want them side chained to the low end percussion? How would you group process this to avoid individually side chaining all the instruments? Just do a group bass summing track and separate the low end from the drum stack into a separate stack or..?
@TheRealSandman
5 ай бұрын
What's the difference in doing the summing to just sending all your audio to a separate bus to compress?
@rjj9278
Ай бұрын
Is track stacks and buss processing necessary for production? I’m a beginner producer and I really would prefer not to be bothered with extra stuff like this if not necessary? Can I just get away with loading any desired effects on channel strip one by one or will this present issues at some point?
@chrisfrostmusic
2 ай бұрын
If you send the various kick drums (there are 3 in the boucne down) to a bus to compress. Do you then need to change the output of those drum tracks to stereo or to the bus? I followed the method you have outlined but it just seems to make everything louder because there is an output signal on the bus and the drum tracks. Does that make sense? I am confused.
@SeanOBrien888
8 ай бұрын
Thanks for all the great videos. They are awesome and a great help. This doesn't seem to work when using midi. I'm using Drum Machine Designer and I'm trying to apply gated reverb to the toms. If I send the toms to a Track Stack so I can apply gated reverb to all 3 toms at the same time they don't make any sound. As if the midi doesn't make it to the Drum Designer. Also the plugins in Logic don't allow multiple tracks to be side chained by 1 gate (All 3 Toms). I know Studio One does. The only way I can apply gated reverb to the toms is to create an aux track for each tom. Which seems wasteful. Am I missed a something? Maybe you could do a video on 80's gated reverb using Drum Designer
@iamdjtab
7 ай бұрын
Great Day to You Mr.MTHG!!! I was wondering if you've experienced in or out of track stacks, hitting solo on a track, but hearing more audio tracks than the one soloed?
@MusicTechHelpGuy
7 ай бұрын
It's possible that you might have accidentally set some tracks to "solo safe mode". Basically if you control-click on a solo button, you'll see a diagonal line go through it, which means the track will still play even if another track is solo'ed. Control-click again to turn off solo safe mode.
@iamdjtab
7 ай бұрын
@@MusicTechHelpGuy C'mon MTHG... I've watched enough of your videos to know better than that. LMBO! Actually... I believe I've figured it out. It seems soloing a track that is going to the same bus (like a stack, which is basically an aux track) solos other tracks in that stack. When I experimented by assigning the track I wanted solo'd to the stereo output, it solo'd as desired.I don't know if that's a glitch, but that's what happened. Thanks for replying though. Also, as always... enjoying your content!!!
@charleeparkerxo
Жыл бұрын
I knew you were dropping a video today. But I REALLY hoped it would be on automation.
@MusicTechHelpGuy
Жыл бұрын
Tomorrow will be an automation video. Actually the next 2 will be on automation. Offline automation tomorrow, hopefully, real-time automation on Wednesday. Will probably be sooner than later tomorrow as well, cause I'm already working on it now, so check back around noon tomorrow, and it should be up.
@charleeparkerxo
Жыл бұрын
@@MusicTechHelpGuy yessssss let’s go! I mean don’t get it twisted. I’m a hip hop artist/producer who normally uses 2 track instruments but wanted to up my game lol. So this video on summing stacks was perfect cause I was literally thinking about how to do this today. And I know how to automate but I have a feeling you can teach me something I don’t know. Maybe like “Smart Control” automation 👀
@charleeparkerxo
Жыл бұрын
Either way…. 🙏🏾 thank you‼️ I’ve been using logic about 4 months now and you are THEE most thorough channel on KZitem explaining this Daw. And trust me… I spend ALOT of time on KZitem so I really appreciate you.
@jfbmusic
Жыл бұрын
Hey Josh, another great vid! You got super creative with the 3-synth Summing Stack at the end. I bet it‘ll give everyone watching fresh new ideas - def did that for me.
@guzzoofoz
Жыл бұрын
👍
@nishantmathews890
6 ай бұрын
how can i add an extra track in an already made track stack?
@vettimack
Жыл бұрын
When I send my single hits to a bus reverb it works fine, but then when I want to filter the drum bus down as a whole the reverb still plays, how can I stop this? thanks.
@rachelraspberry1761
Жыл бұрын
Are you able to add automation to summing stacks? I see how to add automation, but whenever i click to add a little line with points, nothing happens.
@oriolgalofre2528
Жыл бұрын
Does anyone have been able to create a track stack inside another track stack?
@milenyum17
Жыл бұрын
😀😘❤
@derekgillard4861
Жыл бұрын
where is #28?
@MusicTechHelpGuy
Жыл бұрын
Logic Pro #28 - Sends & Time-Based Effects kzitem.info/news/bejne/ooee04Ooh5Odi6w
Пікірлер: 52