That’s a huge lever added to the wheel axis. Feels like it really needs additional support in order to prevent base and added mechanism damage by just laying hands over the wheel
@wangwelen659
2 жыл бұрын
There are many mistakes in the installation process, which will eventually lead to the steering wheel Angle error, which must be reworked
@larstorenordbognedal9107
11 ай бұрын
Where can I find a better video then?
@REALSIMPILOT777
Жыл бұрын
Nice mod , easy to install . The original video more easier to understand. Make sure you got all kind of tools before starting, some angles are hard to screw specially the mask cover .
What parts are you using? Can you please give me a full list?
@laithjaber30_Gaming
Жыл бұрын
It’s the Obokidly Upgrade Type DIY Racing Simulator Steering Wheel Turn Signal Wiper Lever Switch For Logitech G27 G29 G920 G923 Logitech Thrustmaster T300 (Upgrade Type-For G27/G29, Black). On amazon
@KoshiVirii
Ай бұрын
How to G25? @2:57 the wheel has 5 pins and the indicators have 7 pins EDIT: Turns out very simple How to G25, de-pen the pass through and cut the the end into the wheel, try not to pinch the red wheel buttons wires fitting the logo cap.
@renehulgreen8650
20 күн бұрын
HI, at 3:30 min. you are using a adapter, where did you get it ? Thanks for the video !
@StickyRickyBimmer
2 жыл бұрын
With your hands on experience can an upgraded steering wheel be used? I have a Grant steering wheel with a 5 bolt converter to three bolt converter and would like to use this too if it’ll work.
@thedave1602
Жыл бұрын
They seriously sent 3D printed parts for something they charge that much for? hold up now.
@ricoladdii6046
Жыл бұрын
Where’s the link for this ?
@puce_ivt
2 жыл бұрын
hey, you can add more rotation to this wheel? like 1800 degrees of rotation?
@Dutch3DMaster
Жыл бұрын
You can. I think the inside is not that much different from a G27. You would need a new rack (that the gear at the end of the steering wheel axle where the wheel buttons cable exits drives) and a new encoder disc, these two will have to add up or you will end up with an off-center wheel after auto-calibration. I modified a G27 (second hand, I was asked to check it out for damage but when the damage turned out to be much bigger than anticipated the owner didn't want it back) so it has nearly 2340 degrees of rotation (from left-lock to right-lock). The endstops in these wheels are not meant to be touched after auto-calibration, the wheels use motor braking to back off from them a bit (which is why the encoder disc needs to match up with the new amount of movement provided by the bigger rack), probably because the original ones are rather flimsy and would probably break otherwise.
@messiahgaming4242
Жыл бұрын
Would this kit work with a g920 wheel?
@Angel-mp6xu
Жыл бұрын
Yeah, the g923 he's showing is the aame as the Logitech g920
@minero08
Жыл бұрын
yes
@pejjespelar
Жыл бұрын
What is the distance with blinkers added from wheelhouse to the steeringwheel?
@koblyha
8 ай бұрын
On Thrustmaster 300 is distance 14cm from base to wheel
@jwsb350
2 жыл бұрын
impressive!
@mssoares2882
8 ай бұрын
Please how do you setup the windshield wiper on the ETS2?
@camarocougar2024
6 ай бұрын
Use the custom mapping in the setting, click on Wipers On/Off and Wiper Speed Up and Down and set it that way.
@TylerVRFR
2 жыл бұрын
stripping the nails man. use a screw driver next time
@Disobedient_One
3 ай бұрын
You will likely strip the screws regardless. For some reason, those three screws that this person used a drill for are extremely tight. How this person got them off without completely stripping them is just short of a miracle.
@Angel-mp6xu
Жыл бұрын
At the price point they should really use metal or aluminum instead of 3D printed parts
@InaMopar
Жыл бұрын
Less weight is better
@B24Gaming
8 ай бұрын
Where can I get this
@julie-lynnoel3448
2 жыл бұрын
put what we need and where we can buy it
@tibijczyktv77
2 жыл бұрын
u bought it or bulit it?
@iajs5350
2 жыл бұрын
you can get it on aliexpress
@tightbandzz9030
2 жыл бұрын
@@iajs5350 do you know which one is the one that he got ?
@iajs5350
2 жыл бұрын
@@tightbandzz9030 brobably nwtc21 or something
@jasonnicholas3722
2 жыл бұрын
@@tightbandzz9030 It's made by a company called obokidly.
@wangwelen659
2 жыл бұрын
This is an error installation demonstration, you can go here to see the correct installation method:kzitem.info/door/PLLD5ia44D_fCQ641pWOK8fUimPwGiyCX9
@0skuu
Жыл бұрын
Thanks
@southernbustransportation
11 ай бұрын
Thank you buddy About saved me from a week of playing technician lol
@Ruskixxx
Жыл бұрын
I can imagine it breaking apart because its 3D PRINTED trash
@jeffreycashen6416
Жыл бұрын
In my opinion, you never showed us what the parts are that we needed, where we could get them and for an approximate price range they would be. You didn't go into detail about what we needed to do in order to attach them, where to connect them or even what screws we needed to undo. So, it wasn't to bad of a video clip, i didn't find it helpful. And as i said, it's just my opinion.
@minero08
Жыл бұрын
Really sorry for that! Im still struggling to make video! Im planning to install that on my cammus drive if I have free time, I will try to do better next time really sorry!
Пікірлер: 43