omg this fixed it. I spent an hour wasting my time with Lorex’s troubleshooting guide. Thank you for this video.
@jonastriesanything
15 күн бұрын
That’s awesome! Glad the vid was able to help you out! Thanks for the great feedback as well!
@williamv3909
6 ай бұрын
thankfully mine came with a spare plug, Thank you man! never thought to try and switch them out, worked like a charm!
@jonastriesanything
6 ай бұрын
That awesome to hear man! Glad my vid helped you out!
@MultiMusicianman
2 ай бұрын
Thanks for this video, our camera system went down with this same scenario situation, Thanks much, I just have to bring my voltage meter and do the same as you have done.
@jonastriesanything
2 ай бұрын
Sweet, glad this vid was able to help you! Hope your camera system will be up and running soon!
@MultiMusicianman
2 ай бұрын
@@jonastriesanything Yes, thanks for the reply, only to find out that the strip it was in was not working but still going to make sure of all the other plugs I tried you trick though, only to discover no light on that main snake plug (rectangle box that you speak of and point to in your presentation.
@MultiMusicianman
2 ай бұрын
@@jonastriesanything Our cameras are back up and running, Thanks once again for this clear and precise demonstration. t was the 12v power supply that feeds the octopus wires.
@castercyrus9076
27 күн бұрын
Thank you..i have the same problem. I will change my power supply.
@jonastriesanything
26 күн бұрын
Sweet!
@williambarker9889
2 ай бұрын
Thank you for this video.
@jonastriesanything
2 ай бұрын
You’re welcome 🙂! Glad it was able to help you!
@castercyrus9076
27 күн бұрын
May i know where you bought the 24v power supply? Could you attach a link please thank u
@jonastriesanything
26 күн бұрын
I took the power supply from my old router.
@Daniel-wq8yh
Жыл бұрын
thank you. this fixed my issue
@jonastriesanything
Жыл бұрын
Glad I was able to help 😄!
@friloux42
10 ай бұрын
Thanks for the video! It corrected my problem!
@jonastriesanything
10 ай бұрын
Sweet, glad this helped you out 👍!!!
@taehoonkim6384
4 ай бұрын
hi! I had same issue. I have ordered the new power code. and tried.. but still black screen...... what should I do?
@jonastriesanything
4 ай бұрын
If you connect a monitor to the DVR, do you see a black screen? If the voltage is good for each line, then check if there are any errors relating disk drive or other parts.
@HeritageFarmsTexas
8 ай бұрын
So, I’m having same issue. My Current power supply is 12 v. To both unit and cameras. Was yours 12v originally.?
@jonastriesanything
8 ай бұрын
The original was 12v. I ended up just using the 24v power supply and that seemed to fix the issue.
@timtu1120
11 ай бұрын
I have the same problem. But i wondered in the beginning of this video you measured the old PS is 12v, but in the end of video the voltage of the new PS is 24V ???Please help. Thanks. I measured my PS is 11.96V so i think my PS is working fine.
@jonastriesanything
11 ай бұрын
Yes, 11.96 V is basically 12V. The power supply I used in testing was 24V. That’s why it showed 24V. In my case, 24V was ok to use since I have 8 cameras with extended wires. Needed more power to maintain all of them.
@PreachTheGospel07
Жыл бұрын
Thanks for sharing
@jonastriesanything
Жыл бұрын
Glad it helped 😊!
@coreyparkinson21
2 ай бұрын
Hi I'm having the same issue, does that power supply plug into the DVR?
@jonastriesanything
2 ай бұрын
There are two power supplies. One for the DVR and the other for the camera wires (octopus connector). This one is for the camera wire.
@coreyparkinson21
24 күн бұрын
Hi having the same issue again do you recommend the 24v oppose to the 12v it comes with?
@jaywardjulian6163
Жыл бұрын
Nice thanks for the remedy video
@jonastriesanything
Жыл бұрын
Glad I was able to provide good info! Kindly subscribe 😁!
@carlosribeiro3821
11 ай бұрын
So im wondering if this is the same reason my outside cameras act funny at night and go all fuzzy then go clear and then just record in black and white instead of colour.
@jonastriesanything
11 ай бұрын
Yes, exactly the same symptom that I had. Camera goes blurry, then black after. Caused by faulty power supply not supplying the right amount of power.
@carlosribeiro3821
11 ай бұрын
@jonastriesanything that's so weird cause I had these cams up for over a year and just last few months they act up.
@Dancerboxer
10 ай бұрын
Same thing happened to me. Had this system over a year and all in a sudden… screens are black
@carlosribeiro3821
10 ай бұрын
@@Dancerboxer might aren't black, I have 2 of them get pixelated at night. And then one of them just stays back and white outside and the rest are colour.
@fpolanco6753
Жыл бұрын
Thanks
@jonastriesanything
Жыл бұрын
You’re welcome!
@cynthiarincon1800
Жыл бұрын
Where do you buy a new power supply from?
@jonastriesanything
Жыл бұрын
Amazon. Just search for security camera power supply.
Пікірлер: 42