Hands down this is the best RC motocross machine ever
@mickfitz76
Жыл бұрын
So good I ordered both colors
@thatsmyrc
Жыл бұрын
This is so up my alley of must get. From my mx racing days to a fabricator on rcs. What a show piece off the charts thinking went into this bike 👍🏼
@thatsmyrc
Жыл бұрын
Now you need a sound for this kit losi 😉
@FrankA-973
Жыл бұрын
Can’t wait for colored chains and aftermarket wheels and graphics kits.
@garrettbinder2662
Жыл бұрын
Sweet bike, I pre-ordered one already. Also great video and perfect how you led this tutorial. Very smooth and on point.
@frankroot3890
Жыл бұрын
My favorite option part!
@kylewalker1703
Жыл бұрын
Only because of your videos is why I'm buying all the upgrades for this motorcycle I just can't wait to get it now if you could do all of the aluminum parts and make videos of them installation I would sincerely appreciate it
@hichkakdeemo5413
Жыл бұрын
By putting threadlock in advance on the pinscrew you put in at 10:40, you risk leaving threadlock in the hole and create binding while it needs to be able to rotate freely
@jimnardone32
Жыл бұрын
This thing is a beast! Look forward to pulling the trigger on it one day.
@carlokun
Жыл бұрын
I hope they will make aluminium wheels for this. That would be sick.
@Wanted1069
Жыл бұрын
Marchisini Magnesium rims!
@superstock9261
Жыл бұрын
They would be heavier and probably bend, maybe it would be a display part
@1TruePatriot
Жыл бұрын
@@superstock9261 If they were steel (or aluminum?) spoked wheels, I doubt the wheel would bend?
@ColdStoneRacing
Жыл бұрын
Rc_driver already bent his wheels and broke the support holding the forks on to the frame.
@speedgears1236
Жыл бұрын
I think the spokes are metal. Because RCDriver jumped it and bent them.
@mainyakmainer7162
Жыл бұрын
With your aluminum replacement hubs you need aluminum rims with carbon fiber spokes
@arcturus1616
Жыл бұрын
Cant wait to see the aftermarket aluminum wheels that come out for this. Someone will make them.
@1TruePatriot
Жыл бұрын
Have you considered that by installing a MUCH stronger, UNFLEXIBLE swingarm, that that just makes FRAME DAMAGE more likely, as the aluminum swing arm will just transmit ALL the impact forces to the swingarm mount and the rest of the frame?
@robmule4647
Жыл бұрын
You're worrying about nothing, the rear shock with 21lb spring takes the force from the swing arm.
@hichkakdeemo5413
Жыл бұрын
@@robmule4647 That's a bit of a simple way to look at this. The pin that holds the swingarm is a transmissionaxle as well. That axle will take more impact with the stiff swingarm. The smallest amount of deformation will lead to binding and wear. Whatever way you look at this, there are forces and stresses which the shock does not absorb and are increased by stiffening the swingbar.......
@robmule4647
Жыл бұрын
@@hichkakdeemo5413 but they aren't worth worrying about as seen in real motorcycles over the last 50 years.
@Bogues_88
Жыл бұрын
I got ally swing arm haven't put it on yet .. has bigger bearings than Losi one .. made by GPM
@eminstinct4114
10 ай бұрын
@@robmule4647 rc are very different then the real thing lol so you shouldn't compare them but i do agree it shouldn't do to much damage
@garethjones2125
Жыл бұрын
This bile looks amazing, but the UK price of over £700 ($1,000) is crazy. £500-£550 I would have been tempted.
@Paul0088
Жыл бұрын
Yep too steep for most in the UK shame really was looking forward to this
@lexsteel12
Жыл бұрын
I have two X-rider bikes. They use a similar flywheel design to this bike. They are grear bikes. But, so far, I like what Losi has done with this bike. For one, I ike the fact you can control the rpm on the bike with the remote. Second, I like the battery compartment design they are using. On my X-rider bikes, I am limited to the types of batteries I can use. Because the bikes battery compartment is meant for a cube shape battery. There are not many cube shape Lipos out there. So, I am limited to the battery that came with the bikes. I am looking forward to this bike. I will definitely be picking one up. I hope Losi comes out with upgrade parts for the bike.
@LosiRacing
Жыл бұрын
upgrade already available check them out here www.losi.com/search?q=%22LOS06000T2OptionalParts%22&relationType=OptionalParts&parentProduct=LOS06000T2
@lexsteel12
Жыл бұрын
@@LosiRacing Will, there be a direct steering option for the bike?
@jongonegone1262
Жыл бұрын
im still waiting for financial assistance from the lender to purchase this at $599.99 its a great time for losi to have these prices in america !!! thanks gil for puting in the affordability word at horizon.
@V8chump
Жыл бұрын
$550 if you have a charger and a 2s already
@jongonegone1262
Жыл бұрын
@@V8chump horizon's gone koo koo.
@JSmooVE3990
Жыл бұрын
Considering it's got two motors and a six channel radio with custom software I honestly don't think it's that overpriced.
@the_minimalistic_adventure
Жыл бұрын
@@JSmooVE3990It really isn’t. People are acting like the price is astronomical.
@clean1566
Жыл бұрын
@@V8chumpI used my bonus points at HH to get mine for $500. Lol it’s gonna be the best $500 I ever spent!
@robertwright6539
Жыл бұрын
I need a video on how to rebuild the top end
@speedgears1236
Жыл бұрын
Very well done video. Thanks
@maximuskodrrata2697
10 ай бұрын
youve just did a very great job!
@andrewmagro7703
Жыл бұрын
i am so glad that i have never bought a bike from any other manufacturer and been put off by poor performance and build quality because from what I have seen so far with this Promoto MX from LOSI is simple smashed outta the park the running is smooth and thanks to the gyroscopic design and the looks of a real scale bike at 1/4 is now what i am going to get myself thanks Losi for being a great provider and up there with parts and quality.💯💥
@bapojean5981
9 ай бұрын
Your Killin it with all these tutorials! Can you tell me what exact power tools and allen attachments you are using?
@dustyrccustom1973
Жыл бұрын
very nice machine !!!!!😃😃🤩👍
@ESPonMe
Жыл бұрын
Can’t wait to see fox shocks on these
@burn1gotbeats
Жыл бұрын
Protaper bars and Fox shocks next🙏🏾😎
@matthewh6242
Жыл бұрын
Fox shocks? This aint a 70s bike
@burn1gotbeats
Жыл бұрын
@@matthewh6242 lol
@jasonreed9429
Жыл бұрын
can i get a BVC 3wheeler kit yet?.......
@DoubleADay
Жыл бұрын
That would be sick!
@basherbodies7285
Жыл бұрын
Hope to buy one after the summer! Greetings: basherbodies 😉
@aguilarsergio4323
Жыл бұрын
Excellent
@tremorflow3614
3 ай бұрын
Nice helpful video! What electric drivers are being used?
@SIDESLIP
6 ай бұрын
I need to know about that cordless driver. I really need one of those. Please let me know what it is?
@OGPAPERBOY77
10 ай бұрын
Its easier to install if you disconnect the shock from the bottom
@rong4189
Жыл бұрын
Wonder if Talbot has one yet?
@PriscilaRodriguez-wq5hd
Жыл бұрын
Me regalas una moto están lindás como quisiera unas de esa
@waynegilchrist3535
Жыл бұрын
I like everything about these bikes but the price. Having said that, I also believe they should have aluminum swing arms for the cost. I have always been a losi driver since the early 90's. But I purchased a tamiya clodbuster gray edition and wild willy 2 instead with another spectrum radio.
@the_minimalistic_adventure
Жыл бұрын
The price is not bad for what you get… this new bike is a game changer.
@clintonkojro299
Жыл бұрын
If this thing got a 3s upgrade that would be insane probably be too much to handle tho
@baymobbrcclub7426
Жыл бұрын
Is this part made by losi or vitavon?
@jessiechandler1875
Жыл бұрын
Paddles 🔥
@terryperrott8567
Жыл бұрын
It looks more like a real motor cross bike. If it would be possible at all to be able to have the rider slide back a little so if your going through whoopty doos you would have more & better control. The reason why slide back a little is to transfer some weight back so you could skip across the tops of them .
@KingMrBigE
Жыл бұрын
Only problem with adding more metal is that it generally makes it less flexible and shit starts to break that normally wouldnt...
@dizzzave357
Жыл бұрын
Do the chain tensioning inserts from the composite arm work on the aluminum version too?
@jeffreyselleh3623
10 ай бұрын
Yes
@dhstube
Жыл бұрын
Rear caliper are misaligned with brake rotor
@Harleyfunman
Жыл бұрын
If they are available ? No one has any ?
@ebutuoy8272
Жыл бұрын
16:11 I will assume that isn't a crack going across the underside.
@mickfitz76
Жыл бұрын
I've watched it 3 times and maybe it is. towards the centre it isn't straight if it was a manufacturing mark.
@FLG8r
Жыл бұрын
I assume you attain enhanced performance, durability, etc, correct?
@Bogues_88
Жыл бұрын
Not likely just more weight on bike less weight in the wallet .. 😂
@traileater
Жыл бұрын
Does this version use a kickstart😂
@DANDY476
Жыл бұрын
Semplicemente modificando LEGGERMENTE l'ancoraggio del pilota, questo potrebbe ALZARSI SULLE PEDANE durante i salti !!!
@jamesparmelee4137
Жыл бұрын
When can we buy these?
@blazelong3803
Жыл бұрын
Their already available for preorder
@paintendaveextremecollisio8057
Жыл бұрын
Nice👍 is the bike water proof?
@V8chump
Жыл бұрын
The receiver wasn’t in a waterproof box so you’d have to do something about that. Conformal coating or put it in a balloon (if it will even fit)
@paintendaveextremecollisio8057
Жыл бұрын
@@V8chump thanks for the reply.
@winklton
Жыл бұрын
Sham losi are ripping everyone in the uk off, it’s a good product but no one in uk will buy it cos it’s twice the price here
@Paul0088
Жыл бұрын
Yep too steep here
@Bogues_88
Жыл бұрын
It's not twice price lol
@jessiechandler1875
Жыл бұрын
Air filled tires too 🤔
@Bogues_88
Жыл бұрын
What .. no they aren't .. just bit foam
@jessiechandler1875
Жыл бұрын
@@Bogues_88 I was being sarcastic bud. As in they should’ve already had. If you ride, you know a hard tire is shitty to ride on.
@allendavis3107
Жыл бұрын
🫣when he disassembled the rider lol
@porroco
Жыл бұрын
Shock should be piggy bag
@stonejss727
Жыл бұрын
I’d rather have the 5ive B back
@MarcusKeeler
5 ай бұрын
Why do Americans always always always fail to be able to vocalize the difference between a wheel and a tire?
@p_hat
Жыл бұрын
men playin w barbies in 2023
@EJ-74
Жыл бұрын
Ken riding a badass dirt bike, Hell yeah 😁
@rcpete7055
Жыл бұрын
It's £789.00 here in UK.. Couldn't you have made it any cheaper that's a lot of money I don't think I'll ever afford one😢
@giraffeapproved
Жыл бұрын
Your team should be proud of this thing. It seems absolutely incredible! The fact that it has a real chain and sprocket is so cool.
@RunThatRC
Жыл бұрын
This is definitely in my wish list. I'm a losi fanboy for sure and this looks promising!
@justmike.4920
Жыл бұрын
All these options are FANTASTIC.... BUT , THEY SHPULD HAVE BEEN INSTALLED WITH THE PRICE YOU ARE CHARGING FOR THE WHOLE KIT.
@ryanrodriguez70
Жыл бұрын
Why can’t we get larger or smaller rear sprockets to change the gear ratios?
@Bogues_88
Жыл бұрын
Well not much room for larger front sprocket and smaller rear chain way too lose .. I could sure do with 1 tooth bigger rear sprocket cos damn chain stretched so much
@JRMNone
Жыл бұрын
The price of the old RadioShack 1/4 RC Ricky Carmichael Dirt Bike just went up. Glad I kept mine (I have two).
@EJ-74
Жыл бұрын
I have the old Ricky Carmichael dirt bike, its s bit bigger than the Losi, I've been wanting to upgrade all the electronics for a while now, hopefully this will inspired me lol, I saw a guy upgrade the same bike to 3S and it ripps hard!! So glad to see Losi come out with a dirt bike, Love the wheelies 😁
@simonz28
Жыл бұрын
$930 AUD ...for that much it should come with the aluminium swing arm ... great rc , amazing but nearly a grand with no battery .....cant see it being a hot seller for that much
@Bogues_88
Жыл бұрын
$1250 in New Zealand and well worth it. ... pretty much completely sold out in new Zealand
@a-ztube
Жыл бұрын
Great looking swing 😍🤙
@mbaseytjf
Жыл бұрын
I’ll Jump on!!! Being in the RC world for the better part of 35 years. From my Losi Jr x2. In 1989 To my Pro moto. This is hands down one of the best machines Losi has put out!! I just took delivery of a host of Aftermarket Parts for mine. The build is in progress!!! Bravo Losi. BRAVO
@713Ace529
Жыл бұрын
Amazing touch 👍
@hammerdown4848
8 ай бұрын
Can you make a video changing out the front bulkhead. It’s always nice to have a visual reference before tackling it yourself.
@Patrick-e4w3d
Жыл бұрын
I'm hoping for heavier aluminum wheels too, these bikes a pear to nose dive in jumps, a heavier rear wheel would increase pitch articulation, not to mention trick rims would greatly increase the popularity of the badass bike, just imagine milled chopper type rims or spider web mags on this.....
@mickfitz76
Жыл бұрын
Put a lead wheel weight under the back fender. 5 grams should be enough. Even squeeze a fishing sinker flat
@Bogues_88
Жыл бұрын
It doesn't nose dive
@Bogues_88
Жыл бұрын
It all depends on your jump and mode .. I can control the bike in the air .. do a big jump front wheel way up and split sec b4 land tap break land perfect flat .. nose is down pull the trigger !
@zanderflander7880
Жыл бұрын
What do you have to fix that obnoxious screaming sound the bike makes? It’s worse than nails on a chalk board!
@L2theWcarscoffeelife
Жыл бұрын
all inks to this product say 404 cant be found not one hobby shop lists it is there a problem with them??
@Bogues_88
Жыл бұрын
What level now just google a Losi promoto at shop near u
@toadady
Жыл бұрын
how about a vid on glueing the proline tires to the motoX rims?
@michaelvoorhees5978
Жыл бұрын
I need an answer asap. They say never under any circumstances use a charger other than spektrum smart charger. Is this true? I have a traxxas live iq charger. I was about to order one of these in red but If I have to buy anther charger I'm not ordering... help asap please
@Bogues_88
Жыл бұрын
Sorry for not see the his sooner .. buy red one and use shorty lipo batteries .. U might need solder new bat plugs .. I dunno what traxax charger U have or if U can charge regular battery not just traxas
@wilburkookmeyer024
Жыл бұрын
So sick its actually got a chain
@Todd_G_FPV
Жыл бұрын
Losi... please make a extended aluminum version and longer chain combo pack! 🙏 thanks for all the awesome toys! Been converting my mini b to to a drag racing machine haha i put a brushless kit thats almost twice the size of the stock motor and a 30amp hobbywing esc with a trx tsm receiver and i fabed a wheelie bar and put a 27t pinion, she rips!
@jeffreyselleh3623
10 ай бұрын
Turn off the gyro
@mickfitz76
Жыл бұрын
Damn. Already have to spend momey on it😂
@Bogues_88
Жыл бұрын
Except U don't
@The-Jokes-on-You
Жыл бұрын
How long before the Ghost Rider model comes out?😉🤣
@ashleym2878
Жыл бұрын
For nearly 1000 bucks they should come with all the aluminium good stuff just seems like another rc scam product to me now they will have you spending more to upgrade something that should be as good as it gets for that price.
@Bogues_88
Жыл бұрын
Why .. 😲 don't need all the ally crap it prob go better with out it. Most ally just extra damn weight
@Rob_NABS
Жыл бұрын
Staggering. It's just like working on a real bike.
Пікірлер: 127