That how I heat up every thing if it not screaming your doing it wrong 🔥🛠️💯👍✌️💪
@johndoe528
11 ай бұрын
Have you seen the aftermarket TRX 3.3 crank from RCRenew? They CNC out a stock crank, finished product looks like a nice race engine crank instead of the plain circular crank that looks like it came from a plane engine.
@thebug4046
11 ай бұрын
Yeah I've seen a few of them it doesn't look bad but a little bit overpriced for what was really done to it I think but would be interesting to see how they perform
@user-uf4nr4vw7f
11 ай бұрын
That was funny but crazy man lol FIRE ha ha . Oh and it's jason28w I'm just on my phone
@thebug4046
11 ай бұрын
Not one of my finest moments lol
@cassianomartin2699
Жыл бұрын
Oh no, he's again using that torch on the engines, you'll damage them! 🤣🤣🤣
@thebug4046
Жыл бұрын
Hahaha
@gingerman6560
Жыл бұрын
Oh no he's got the torch out lol
@thebug4046
Жыл бұрын
🤣🍻
@PLAT515
Жыл бұрын
Thought i'd ad my findings on the SH.18 backing plate on the .19t. I came to find after a good amount of fuel that the sh.18 backing plate must be slightly shorter than stock, which aloud the connecting rod to walk slightly while running enough to contact the groove in engine block the rod rides in. I solved this issue by adding 2 shims behind the internal OWB. Now if the rod was to walk slightly over itll be stopped by the OWB rather than "self machining" the block for clearance. Next teardown of my .19t ill make a more detailed post on the issue on your group page to paint a clearer picture
@thebug4046
Жыл бұрын
Interesting I like to hear about this kind of stuff I'm gonna try that too because I haven't seen this happen before
@robertgonzales157
11 ай бұрын
My man ✊🏻
@josephsaucedo8691
Жыл бұрын
A hpi engine comparison would be a great video between the 3.5-4.1- 4.6 and what's the same or differents in parts and what Force model that are compatible. It definitely surprise so people. Great video the facts not fiction 🛠️💯👍✌️🍻
@thebug4046
Жыл бұрын
I would love to do a video between all 3 of those sadly I only have the F 4.6 I don't have any of the other models
@josephsaucedo8691
Жыл бұрын
@@thebug4046 maybe if shipping doesn't coast to much I'll lend you each model IV have to pull the 3.5 out of my 21. I also have each size in what I think the first version /style block the 3.5 4.1 and 4.6 are identical from the outside of the block but the actual internal parts and bore are different .I like to call them sleepers because no one would be able to tell the difference between the v1 from the outside. The V2 block you can tell the difference from the outside of the blocks and the marking stamped on them most people don't know this in less the have every version in all the sizes for each gen Wich I think perty interesting 🤯👍💯✌️🛠️🤔
@aaroncavanaugh8241
Жыл бұрын
First here 😆! I have heard and seen someone took a 2.5 with a worn-out pinch and put a .18 piston in it to tighten it up and made insane power! Idk if that was true or bs and I wonder also. If u can get the wrist pin stuff to work (and traxxas's love for cheap aluminum and using cast) will a losi 3.4 piston fit in a 3.3 with a loose/worn pinch? I do have a spare new Davis Diesel con rod laying around
@thebug4046
Жыл бұрын
Yeah I have heard about this alleged 18 piston fitting the 2.5 I've yet to see that or see any kind of proof about it until then I call BS. However I completely forgot to mention that the 19 and 3.4 pistons are both machined not cast so they are a better piston all the way around. If the stroke is different between all 3 same with all the pin bores so unfortunately nothing is Interchangeable unfortunately
@jukkaovaskainen
Жыл бұрын
👍
@thebug4046
Жыл бұрын
JUKKA how are ya! 🍻
@jukkaovaskainen
Жыл бұрын
I'm fine thanks, hope you are ok. Nice to see you doing vids again.@@thebug4046
@thebug4046
Жыл бұрын
@@jukkaovaskainen thanks brotha 💯🍻
@missrebeccaruthless
Жыл бұрын
LEAVING A COMMENT BECAUSE I CAN 😂🎉
@jayp9299
Жыл бұрын
Haha not to burn 😂
@SmilinRC
10 ай бұрын
Question from Arizona I have a Losi 3.4 and can not locate a head button. What heads or buttons, if any, can I use to make this a runner? Thank you in advance Love your content btw
@thebug4046
10 ай бұрын
Unfortunately that engine was discontinued almost 14 years ago and the parts are impossible to get a hold of the only thing I can suggest is going on ebay and looking for a complete used engine sometimes they popup! And thanks for watchin! 🍻🤘🏻
@SmilinRC
10 ай бұрын
Sounds like one of my 3.3's is getting a Carb upgrade......lol
@thebug4046
10 ай бұрын
@@SmilinRC go for it!
@zackjay71
11 ай бұрын
Low See. Gd dammit. Its Low C. 😂
@thebug4046
11 ай бұрын
Yeah yeah...... lol
@amputeerc9298
Жыл бұрын
So a 3.4 will accept a traxxas pullstart/ezstart as long as you use a ground down traxxas backplate for piston skirt clearance?
@thebug4046
Жыл бұрын
You bet yup!
@amputeerc9298
Жыл бұрын
@@thebug4046 Man you're a genius. I'll be on the lookout for 3.4's that need a starter. I never would consider them if the starting system was broke because I figured an engine is no good if you can't start it. Kinda like my Novarossi 2.5. it's still brand new and I'm scared to even run it since the roto start is weak and impossible to find parts.
@peterjemas7613
Жыл бұрын
You grind your knob off before you stick it in the back?
@thebug4046
Жыл бұрын
Sounds painful and messy 🤣 but you got to grind and test fit until you get it right
@coreytarducci36
11 ай бұрын
Can one eliminate the starter back plate, starter shaft, etc? And use a back plate. I have a bump box for my Revo. I dislike on board starting equipment.
@thebug4046
11 ай бұрын
What engine are you working with?
@coreytarducci36
11 ай бұрын
Haha yeah duh….. I’m thinking of getting the Dynamite .19t Mach 2.
@thebug4046
11 ай бұрын
@@coreytarducci36 ah yeah Zero parts available for it. Nothing to make it pump start. You will have to leave all the starter parts in place and use a bump box
Пікірлер: 39