Vanquish Currie F9
Proline Powerstroke XT
I installed the Powerstroke shocks by themselves and tested shock oils from 27.5 up to 40wt and with the stiffest spring combo available was unable to get ride height and wouldn't hold the weight of the truck compared to the stock Losi shocks. I tried running the XTs unsprung behind the factory Losi shocks and also ran into ride height issues. I had to crank the Powerstroke springs so far down that it was doing goofy stuff on some drop testing and didn't drive very good. After many shock rebuilds and many spring combo changes the XTs just didn't live up to the hype. I am a beginner in rc but it seems that the springs provided in the dual spring setup make the usable spring rate so low that it just is not enough to maintain ride heights on my truck. Given my truck is much heavier than a factory 1/10 scale truck and with all the parts added its just too heavy for the proline package. Until I can get some different springs for the XT's I am going to run the stock Losi shocks and springs. The axle is straight BOSS Vanquish makes good stuff.
Losi Baja Rey
10T pinion installed running 3s 11.1
Stock weight 6.21lb with battery 11.1 4000mah
Completed weight 7.45lb with same battery UPDATE "Need to update the weight a tad heavier now"
Gained 1.24lb
Stock Losi shocks
Losi Shock oil 27.5 front and rear no rebound on rebuild
Cut shock limiters in half and adjusted ride height
Found the CG point and added modeling clay to fuel cell and moved an ESS ONE sound unit around just behind front axle to get a balanced CG.
Servo Splitter 1 into 5, ended up not working, too much draw from all the lights, ended up just using servo extensions and the esc's extra channels.
www.amazon.com...
Racers Edge Glitch Buster
www.amazon.com...
Team Losi LED light bar, mounted upside down on accident"fixed"
www.amazon.com...
Savox SC-1258TG best functional upgrade
www.amazon.com...
Hot Racing Aluminum rear suspension Upper links
www.amazon.com...
Hot Racing Losi Baja Rey Rock Rey Carbon Fiber Rear Lower Links
www.amazon.com...
Gear Head RC 1/10 Scale Desert Truck Rear Lights
www.amazon.com...
RC4WD 1/10 Baja Designs Squadron Pro LED Lights
Rolled the truck during testing and snapped off both Baja Design lights, moved to 10mm angel eyes led buckets, when I figure out a more permanent solution to mount them will have a video for that.
www.amazon.com...
Fimo Polymer Modelling Soft Clay Blocks- Fuel Tank Weights
www.amazon.com...
Scale Fire Extinguisher w/ Mount for Off-Road
www.amazon.com...
Antenna Delete
www.amazon.com...
Carbon Fiber Black Kydex 7.5"x12" .080 used the body buttons and some super glue to mount the panels
www.amazon.com...
Team Losi Silicone Shock Oil 27.5 front and rear
www.amazon.com...
Stock LOSI shocks
SENSE INNOVATIONS ESS One Plus 2017 Short Course Truck FX
www.amazon.com...
Big shout out to Cyconxc
/ @cyconxc
Cyconxc was a huge inspiration to get a rc trophy truck.
Go have fun
Негізгі бет Losi Baja Rey"The Mini BOSS"CurrieF9+Powerstrokes
Пікірлер: 71