Thanks to channel patreons / youtube members: • Paolo • Cecilia • Kesnei • MunzMadeThis • Conlon Carmody
@maximlar236
2 ай бұрын
Pls made guide for sudachi and lossless scaling
@omarhegab
2 ай бұрын
If you noticed some major input lag problems (especially in RPCS3), try and enable (Allow Tearing).
@ehcor
2 ай бұрын
45fps is minimum for the latency or lag youre gonna experience with this, even on controller. Allow tearing is not a big input latency decrease.
@333hronos
2 ай бұрын
Also may works limiting your in-game fps to such numbers, when even after enabling LSFG your GPU have a little perf headroom.
@mihailcirlig8187
2 ай бұрын
@@ehcor for me yeah it's kinda big, you can feel the difference and it's only just slightly more ms than the raw game, it works pretty damn good for me
2 ай бұрын
how to fix the input delay? i get like 30 fps and with lossless scaling i get 60 fps but i cant play with the input delay i have nvidia reflex and stuff on too
@mohamad.h4300
2 ай бұрын
Great video man please keep updating the videos about lossless scaling I have a question how do I use the upscaler it self?it's a bit confusing!
@naufalelghazy563
2 ай бұрын
If u want use upscaler, just lower in in-game resolution and set scale factor. Example, my monitor is 1440p and set ingame resolution to 1080p,.
@Iamdudeman12
2 ай бұрын
Bruh thank you!@@naufalelghazy563
@iamhumam3456
2 ай бұрын
is the speaker of the video AI ?
@thewitcher8675
2 ай бұрын
I think it is maybe they just don't want to speak so using ai makes sense
@lichtschatten1515
2 ай бұрын
nice video, keep it up bro!
@Adi1980ize
2 ай бұрын
2.9 version shows two fps counters in upper left corner,why,what it means ?
@PixelClient
2 ай бұрын
I think the first one is the maximum that you set it to, and the second one is the frame rate that is generated
@Adi1980ize
2 ай бұрын
@@PixelClient maximum that i set,you mean if I lock fps in nvidia control panel ? In 2.8 version of lossles scaling there is only one number
@PixelClient
2 ай бұрын
@@Adi1980ize He says to keep it lower than your Refresh rate, I'm talking about the game's fps, he tells us at the start to keep it at 30fps for 1080p and 40fps for 1440p.
@DrGreenThumbNZL
2 ай бұрын
RPCS3 works bad with it 😢
@aliced6504
Ай бұрын
First one is the capped and second one the generated fps. e.g. when you use x2 and have a 144hz monitor then cap it to 72fps in control panel and when use x3 then cap it to 48fps. but be sure that you get this framerate without LS constantly.
@meepmerping
2 ай бұрын
Will the FPS become more stable on RPCS3 God of War III?
@AlexwpiGame
2 ай бұрын
use locked 30FPS in RPCS3
@definitelyenisi345
2 ай бұрын
Anyone know why lossless scaling instantly shuts down after I press on scale? help would be appreciated!
@GameRider805
2 ай бұрын
Try switchting from auto to custom or vice versa and make sure your game is not in full screen mode
@singlewave805
2 ай бұрын
if its cracked then its expected, but if you bought it then i dont really know
@user-rw4cq3dj7h
2 ай бұрын
Can you make guide on this lossless scale
@iPlayRandomGames88
2 ай бұрын
Anyone know how to fix sttutering or freeze after gaming for a while when using LS?i already try to cap the frsmerate via NVCP to 72 FPS half of my Monitor RR which is 144hz Gsync.But when i capped it the games would running at 72Fps only although the LS is activated,
@chefscallop1
2 ай бұрын
I need to turn off frame generation in game setting ?
@eday2448
2 ай бұрын
Should I keep "allow tearing" on all the time? I have a freesync monitor, the lower the better, right? Unless im mistaken.
@your_virtuoso
2 ай бұрын
Great video Is this available for rtx 3060?
@AlexwpiGame
2 ай бұрын
Can be used on any GPU, even integrated ones
@your_virtuoso
2 ай бұрын
@@AlexwpiGame that's amazing Thanks for sharing 🙏
@NERO6744
2 ай бұрын
Finally a video am waiting for
@nawsih848
2 ай бұрын
I have a question about lossless scaling, does this software affect the game physic like legend of zelda
@MrHorst38
2 ай бұрын
There's a lot of tearing on the bottom of the screen when you run in Tears of the Kingdom. Quite visible on my system and inthis video. Tried Lossless Scaling's Vsync option, driver v-sync, nothing can fix this.
@ahmadafzal1918
2 ай бұрын
How did you solve the artifacting and screen tearing/glitching issues
@devil_cycle3232
2 ай бұрын
V-sync❤
@MrHorst38
2 ай бұрын
He didn't, look at the bottom of the screen for example when he plays tears of the kingdom and the character runs. Tearing galore.
@adsworld7406
2 ай бұрын
Whenever i click scale and click on my game window after 5 seconds the game window goes black with only sound in the background. How do i fix this?
@lukainteressado.3202
2 ай бұрын
The game must be running on windowed mode. Not fullscreen
2 ай бұрын
change scaling mode or capture mode
@gustavovaldivia4664
2 ай бұрын
How do you play Zelda totk on computer?
@ferluisch
2 ай бұрын
linux build soon?
@kunwar16cr7
2 ай бұрын
Does anyone has fix for character ghosting while moving camera ? this happens to me whenever i use lossless scaling
@AlexwpiGame
2 ай бұрын
enable allow tearing
@DD-oc9ou
2 ай бұрын
@@AlexwpiGame what negative side effect has allow tearing?
@kunwar16cr7
2 ай бұрын
@@AlexwpiGame Tried but it didn't worked can u please find any other solution i need it
@jatindersingh-bo1lb
2 ай бұрын
bro u think vita3k pc version is good but i think andriod version is bad no major improvement for andriod i expact dead or alive 5 plus andriod version run full speed but game has graphic clithes buxes
@AlexwpiGame
2 ай бұрын
Yes, I recently tested DoA 5 on Android, and the results were quite poor. The compatibility list for Windows and Android differs, but this emulator is evolving quickly compared to others.
@ferluisch
2 ай бұрын
I started to wonder if this would work with android when emulating windows
@stupiocity245
2 ай бұрын
Finally i can play gow ascension. But i doubt their lag and latency even when allowed tearing
@Raghav-gd3fn
2 ай бұрын
hey did you tried ? give us update what happened
@stupiocity245
2 ай бұрын
@@Raghav-gd3fn well it wasn't as bad as i thought. I have rtx 3060 95w, r75800h with 32gb ram. I received on average 40fps on native. Although the latency were like playing in 30fps, but that didnt went bad as i anticipitated. Easy 90fps
@Raghav-gd3fn
2 ай бұрын
@@stupiocity245 👍
@Ghost-pb4ts
2 ай бұрын
Try god hand the only way to play that game at 60 fps also OG re4 is still meant to be played at 30fps game x3 on lossless scaling made me finish that game again
@retrogamer847
2 ай бұрын
But what if the monitor be 165hz and the gum locked 30 fps ?
@Ghost-pb4ts
2 ай бұрын
@@retrogamer847 well prior to the updates you'll need to lock this maximum fps through graphics driver app Now in 2.9 you don't need to this
@rodolfogenovese7042
2 ай бұрын
Idk but every time lossless scaling never worked on my pc
@mattshenk9294
2 ай бұрын
Valdría la pena si tengo un juego que va entre 25-30 fps. Se notaría la diferencia?
@ehcor
2 ай бұрын
No, frame gen necesita FPS estable para que funcione bien.
@Glotón_Volador
2 ай бұрын
si va bien, ya que el resultado seria de entre 50-60 fps, yo lo he probado 3n algunos juegos e igual va bien
@ibangladeshi1161
2 ай бұрын
my fps does not go above 30 and gets a significant drop...using rtx 3060 and the fps counter is of the LS
@tantannn9977
2 ай бұрын
is your fps capped?
@delesegdevassy9685
2 ай бұрын
Scroll down and change the graphic card option from auto to rtx 3060. On default it uses the integrated graphics
@jeffrey1296-rl1mi
2 ай бұрын
Is can I make this 4x somehow
@MBop-xh8gl
Ай бұрын
Meh, 10 more frames in SQUAD (45 -> 55) with tearing and some stutter. Turned it off.
@aliced6504
Ай бұрын
then you don't set it properly.
@MBop-xh8gl
Ай бұрын
@@aliced6504 Hard to say. I tried several settings recommended by different youtubers and such and all gave more or less the same results. I tried changing settings in game - I did get about 10 more frames/sec but suffered frame skipping and other degrading quirks.
@aliced6504
Ай бұрын
@@MBop-xh8gl Do you set a "scalemode"?
@retrogamer847
2 ай бұрын
This feature really good but should i change anything in nividia control panel or not. Also my laptop screen 165hz,how to enjoy emoulator games that run at locked 30 fps.
@ehcor
2 ай бұрын
Depends, if your monitor has Gsync, Vertical Sync should be On in the nvidia control panel. You can Limit FPS on the Nvidia control panel (Mange 3D settings, Program settings, Add your game) or Rivatuner Statictics server to half or a third of your refresh rate.
@retrogamer847
2 ай бұрын
@@ehcor I know about this but my main problem should I put on 3x mode ? Because then the game will run at 90 fps and my monitor be 165hz that not reproduce lag and latency? Also my laptop screen have gsync and free sync and vsync
@333hronos
2 ай бұрын
@@retrogamer847 if I understand correctly, you only need to limit your game FPS to such numbers, where it will be stable with chosen LS app upscaling or frame generation options. For example, if you have 60-70 in-game fps, you need to limit in-game frames to 60 (and ensure that it will be stable 60 even when you are using LS which have it's own GPU load factor). Also, all generated frames that exceed your monitor Hz will be automatically discarded by LS app, and will not be generated (so no additional unnecessary GPU load).
@retrogamer847
2 ай бұрын
@@333hronos what about games that run at 30 fps
@333hronos
2 ай бұрын
@@retrogamer847 The same, if 30fps is stable and locked (no matter by the game itself or by the 3rd party software), if in-game fps is stable - it will give you best results with LS FrameGen.
@creciundaniel8534
2 ай бұрын
What fps counter are you using??
@ryler7
2 ай бұрын
msi afterburner
@alfonso5177
2 ай бұрын
Ty!
@JorgeBurchardt
Ай бұрын
Tutorial?
@AlexwpiGame
Ай бұрын
kzitem.info/news/bejne/zpCY0oxtbnOTgoI
@DrGreenThumbNZL
2 ай бұрын
RpCs3 works bad with it😢
@stormbreaker46
2 ай бұрын
Does it also exist for Android?
@hamza.991
2 ай бұрын
no
@sinitus
2 ай бұрын
I wish
@ash6202
2 ай бұрын
Boro, what iz thiz Game?
@zellhaufen8583
2 ай бұрын
snake oil
@unik0016
2 ай бұрын
Can It Work With Rpcs3 God Of War
@AlexwpiGame
2 ай бұрын
Yes
@unik0016
2 ай бұрын
@@AlexwpiGame Then Can You Test God Of War Ascension Infamous 1 And 2 UNCHARTED ALL Series Those Need More Cpu And Gpu Demanding Please Test Sir
@ferluisch
2 ай бұрын
is x2 or x3 better?
@qqq9923
2 ай бұрын
X2
@kunwar16cr7
2 ай бұрын
@@qqq9923 any specific reason ?
@Arthur_Trainz
2 ай бұрын
X3, X2 upscales it 2x time 3x - 3x time. Logic)
@omarhegab
2 ай бұрын
@@kunwar16cr7 less artifacts, less input lag.
@woro.
2 ай бұрын
@@Arthur_Trainz bro x2 and x3 refers to the frame generation...not the upscaling💀
Пікірлер: 122