For everyone asking about riser height. Sit on your bike, grab a broom with both hands, close your eyes and extend your arms out. Have someone measure from the broom down to your triple tree. That will give you a general idea on what size risers to chose.
@maplesautosales991
3 жыл бұрын
Don’t tell me what to do
@millerjjoey
3 жыл бұрын
@@maplesautosales991 sorry dad
@emiller2236
3 жыл бұрын
I kept my Harley bars on mine, install was super easy, I would have never had Harley install them
@Soulriderpowder
Жыл бұрын
Would u go 6.5 riser for ur height and more comfortability? Is ur arm ever go numb?
@mombli
3 жыл бұрын
The factory risers on the Low rider S 2020 are 4" right??
@raiderdad4life215
3 жыл бұрын
Sweet! Great info! I was stuck between straight risers and pull back. I like these risers. I’m also checking out thrashin risers! But I’m not going to overlook this discount! Thank you!
@michaelscott7482
3 жыл бұрын
How much did Harley charge to install them?
@erikmorales7612
3 жыл бұрын
Wondering the same.
@rayofdeath6604
3 жыл бұрын
ditto
@jnarvaez23
3 жыл бұрын
Same I thought he was going to say in this video! 😒
@bobhog3969
3 жыл бұрын
Prob around 500$
@millerjjoey
3 жыл бұрын
1000+ in just labor from Harley. I recommend getting things installed from your local shop. Help the small guys out..they won’t rob you.
@ellissmithjr6599
3 жыл бұрын
Great for your height,looks good. Only issue I have with the stock bars,they extend too wide,much is more than shoulder width which can be an issue in long distance...which I have experienced in the past but corrected (wind drag as well). Anything within 28in. to 31in. is great for most people in my experience with most riders in long runs. Love seeing what you are doing here over time with this bike...Awesome👍😎🇺🇸🇺🇸🇺🇸.
@mayhem-knight9131
3 жыл бұрын
I love those risers, I guess I watched your vid a hundred times, and really big shout out to Anthony from SJC, they had no shipping option for Switzerland, so I reached out to them, Anthony the Owner repied within an hour. And within another hour Anthony updated the website with shipping to Switzerland, lucky me I was able to order them. I used your code MK10 that saved me 41 USD thank you MK87, love your vids, keep on riding, and let the force be with you brother.
@Marvelkid87
3 жыл бұрын
That’s awesome man! Enjoy them
@sensei1969
Жыл бұрын
Hello @mayhem-knight9131, I live in Lugano (Ticino), I would like to buy them too and I would like to know if you managed to get them approved in Switzerland ?🤟🤟🤟. Thanks Maurizio.
@mayhem-knight9131
Жыл бұрын
@@sensei1969 hey I did not order them as SJC, first said no problem and first I did the order he didn’t response to my emails any more, and this went on for a month until I claimed a file at my bank and had my money paid back through the US system, I do not recommend SJC, it’s not a trustfull business from my experience, anyway here in Switzerland you will never be able to have them legally on your bike, that time back I ordered the bareknuckle performance modular riser’s (not legally in Switzerland as well) but awesome and amazing quality, but after one year I changed them now to the Tyson XL 12” from Biltwell ( legal in Switzerland ), and I’m very happy with that decision.
@sensei1969
Жыл бұрын
@@mayhem-knight9131 Thanks for the info, you've been very helpful. Ciao biker brother.
@TalismanRocks
2 жыл бұрын
Love the look of the side cut-outs, only thing not crazy about is the SJC white logo facing forward. I'm thinking of going with their 6" with the top clamp that accepts the Street Bob gauge, getting rid of my 2022 Low Rider S gauge location for a cleaner look. Did you change out the bushings too?
@TheSkyhighmusic
Жыл бұрын
I think I’m gonna go with six in as well and I also dont like the sjc white logo facing forward
@xxsnowwolf963xx8
3 жыл бұрын
Genuinely considering this as my next bike I bought my first this year and it is a 2013 Honda interstate But I really wanna build a club style bike and I LOVE the low rider s And yours looks mint bro I’m genuinely considering it because of you haha Quality content too bro!
@sgtthrottle7282
Жыл бұрын
I know this video has been put out for awhile, I just bought the exact risers, I have a question, I’m confused about the cables, Harley told me stock cables will be fine, but everyone keeps telling me I’ll need extensions or new upper cables. I can’t find a good answer for this. Thanks man.
@killuhcali
2 жыл бұрын
@MarvelKid87 do you know if the pullback is 1" or 2" on these bars?
@ryanbergsing6668
3 жыл бұрын
actually need a response to this pretty badly i got the same risers and using stock bars. i see the little space between the risers and top bracket of risers. did you put like a spacer inbetween them? or just tighten them evenly thank you
@EddieFresh3
3 жыл бұрын
Do you know what brake line length they went with? I'm getting ready to add risers, and I am unsure of the length. Thanks!
@sisson16
Жыл бұрын
I know this video is old but if you still have these risers can you get me a measurement of the diameter and also height of the round portion at the bottom? I’m having an issue with larger risers clearing my GPR.
@Eds_PanAm
2 жыл бұрын
just caught this video....must be because I searched risers for a lowrider, just signed papers last saturday and gettin' ideas....1 question though, do you have some elbow bend? or are your arms pretty straight out? thanks in advance!
@woongtv-naturehealing273
3 жыл бұрын
Thank you for introducing me to a nice bike.
@SooHighFashion
3 жыл бұрын
Those look amazing man, been looking for some risers/bars for my 2020 softail standard. I'm 5'6, do you think these 8in are to tall? Or should I just go with the 6inch. Also curious on how you even measured which height is perfect for you
@Marvelkid87
3 жыл бұрын
I’ve sat on a bike with 10” and it was to tall so I new 8 would be perfect. 6 would be fine. I’m doing 6” for my Dyna
@michaelgrossi8745
2 жыл бұрын
Hey Bro, Not sure If I missed it in the video. Do you remember if you had to get clutch and break cable extensions and if so how long? Thanks Man!!
@wildwhiskeywolf8198
Жыл бұрын
MarvelKid87 Sick setup bro, I have the exact same bike. I think I’m gonna go with the SJC 8” risers like you did. Just wondering what cable extension kit you used? Also what grips are those? Thanks…
@mayhem-knight9131
3 жыл бұрын
everyone who read my shout out to Anthony La Rocca the Owner from SJC, I take it back! I can not recommend SJC and do not order from SJC, or at your own risk if you order from another country than USA!, Anthony is just a little thief in my opinion, I had a very good communication with him first, until my money was debited and he had to send me my risers, now over a month past and since over three weeks Anthony is not replying to my emails, very bad, now I need to take further steps to get my money back.
@dabrownconservative7843
3 жыл бұрын
Let me ask you. What's the part number on your clutch cable? It's the white lettering on it in the video?
@rob7105
Жыл бұрын
Ive been waiting on the lucky daves gold riser's to be back in stock since I got my new fat bob a couple months ago.
@Matt.fxlrs666
2 жыл бұрын
Did you have to change any cables for the 8” risers ?
@beausbargarage6213
3 жыл бұрын
What clutch and brake cable kit is this? Part numbers? Vendor ? Harley told me these can't be done yet. Their words.
@christopherrudge2065
3 жыл бұрын
They look amazing. Do they do 6 inch option as I can’t see it on their website? Awesome channel by the way 👌👊
@fciscokid
3 жыл бұрын
Do you know what length size you used for the clutch and brake
@IVAN3049
5 ай бұрын
Wanna see what risers you gonna get the your new ST
@neiltorres852
3 жыл бұрын
Just got my 2021 fxlrs crimson red a week ago and will be putting on the sjc 8” risers for sure. I’m 5’6 so I hope it’s a good height for me. Quick question did you swap out the stock bushings when you got your risers done?
@ryanbergsing6668
3 жыл бұрын
Have the same bike and just out on my SJC risers I love them and yes I went with the gooden tire poly bushings! Don't pay Harley to install these it was so easy just pay Harley to bleed your brakes after words for $100
@JR-eq3qh
2 жыл бұрын
Bike looks awsome bro.What cables and lines did u have to do with those 8” risers ?
@ryanbergsing6668
3 жыл бұрын
I would really like to know what all cables you need to install these riser with stock bars and turn signals. I did use your promo code and got these same risers
@marquismorse7858
3 жыл бұрын
Did he have to get longer cables or will stock allow you to go up to 8?
@SooperFerneE
3 жыл бұрын
Any answer on this?
@Zelus951
2 жыл бұрын
Most likely
@JerseyRican
3 жыл бұрын
Yeerrrrrrrrr
@Marvelkid87
3 жыл бұрын
Yerrrrrr
@JerseyRican
3 жыл бұрын
@@Marvelkid87 what's poppin my g the bike 🏍 looking real right
@vinceruiz3170
2 жыл бұрын
What is your cable set up length?
@sleepers17
2 жыл бұрын
Nice! Did you install these yourself?
@Smokechaser92
3 жыл бұрын
Hell yea those are sick 🤘🏻
@Calisexpensive
3 жыл бұрын
Where can I get mine installed in San Jose for fair prices?
@JGA13003
3 жыл бұрын
hi i really like what you do it gives me a lot of idea. suddenly I measure "5.7" and I am between the 6 or 8 inch that you will advise me thank you in advance from France Europe 😉
@brapsquatch
2 жыл бұрын
Did the stock cables have enough length or did you have to replace/relocate any of the cabling?
@Marvelkid87
2 жыл бұрын
No I had to get longer cables
@brapsquatch
2 жыл бұрын
@@Marvelkid87 Awesome. Good to know. Thanks!
@lifeofesca4170
Жыл бұрын
Where did you get cables ?
@NickelStee1
3 жыл бұрын
Just thinking, see if SJC will do a custom engraved riser clamp for you, put your logo on it, could be pretty trick.
@erikmorales7612
3 жыл бұрын
Finally got mine from SJC in black and put them on! They feel so much different in a good way! Install was easy except the part where I had to clamp the bars to the risers. You kinda have to play a little with that and set them nicely otherwise you'll end up with slightly crooked handlebars 😂 lol
@MrCrispusAttacks
2 жыл бұрын
Did you have to install longer cables for an M8 install?
@erikmorales7612
2 жыл бұрын
@@MrCrispusAttacks yeah you'll have to get extensions. Everything's too short for 8"
@neilkropelnicki1790
3 жыл бұрын
Hey brother bike looks killer I really enjoy your Videos you seem to be a real down-to-earth gentleman True American just like me O keep watching God-bless America HD Neil AKA the Crock
@mikeessary4925
3 жыл бұрын
They look great man!
@MrBulldog73100
3 жыл бұрын
Maybe you can try how it looks on your other fairing? If you still have it!
@frankd2056
3 жыл бұрын
It should be much more comfortable. Looks good suits the bike well.
@ryandawes9708
3 жыл бұрын
Beautiful bike just bought one last week, do you notice a lot of vibration in the foot pegs and handlebars when giving it gas specially hard throttle?
@Marvelkid87
3 жыл бұрын
No I don’t
@ryandawes9708
3 жыл бұрын
Ok thank you
@B702K
3 жыл бұрын
Bike’s lookin’ good! Nice choice!
@Marvelkid87
3 жыл бұрын
Thanks 👍🏽
@Jc-gw2yc
3 жыл бұрын
For someone 510 would u recommend these or the 10 inches?
@inkboi97
3 жыл бұрын
10 inch bro
@ethanswink8471
3 жыл бұрын
Looks great. 🤙🤙
@erikshirkey
3 жыл бұрын
Where did you get that hat though?
@philsalinas4055
3 жыл бұрын
I like that jacket
@hectorsantiago321
3 жыл бұрын
Looks good.
@locoocho2415
3 жыл бұрын
Hey MK87 I'm 5'11" what would you suggest?
@Marvelkid87
3 жыл бұрын
8” should be fine
@brapsquatch
2 жыл бұрын
also good vid. Liked and subbed!
@Boomer-e2v
3 жыл бұрын
how tall are you ?
@bonesandcrows
3 жыл бұрын
Did you have to buy new cables or wires?
@Marvelkid87
3 жыл бұрын
Yes I did
@colincatron8759
3 жыл бұрын
@@Marvelkid87 where did you find the cable extensions kit? I need a set bad for my new 12" LA Choppers Kage Fighters
Пікірлер: 91