Super Labombastic Fantastic Školastic!!!👍👏🤘👃👂🦵💪🤝⚓🚣🫀🧠🫁🌠🏖️🪂🌴🌵🌍🐢🏊🤽🏄💯🌜🌞🙏😇👀🐬🐳🐟🐠😍🏍️💓
@skylerjohnson9089
6 жыл бұрын
Perfect, exactly what i was looking for!
@tennekeystunts1694
5 жыл бұрын
How did you get the dog bone bolt out bro?
@sixwheelcarlisle8491
4 жыл бұрын
Did you guys have the bottom dog bone with the allen key bolt in it undone so that you could let the bolt clear the swingarm to get it out???
@francescosuarez
5 жыл бұрын
Which is the stock height the top hole? So he lowered it 1” and obviously 3” the strut would hit the swing arm... so that 1 feet or 1 inch and is it required to position the brakes and clutch ? Or stock location is fine ?
@Anthonymayn
4 жыл бұрын
If I don’t have the center stand is the shock going to pop out?
@hankjones2975
2 жыл бұрын
if you don't mind the little girl music on a motorcycle video it will do.
@jorgeolguin4267
3 жыл бұрын
Hola buenas que tal, como hiciste para sacar el tercer tornillo, sería el de abajo, yo no lo pide sacar. Que tendría que desarmar? Gracias abrazos
@sixwheelcarlisle8491
6 жыл бұрын
How do I take off the pre installed lowering links without center stand on my bike? Won’t the shock pop once I pull the bolt out?
@MotorTipsVids
6 жыл бұрын
if you dont have the center stand you not able to take out the plates
@sixwheelcarlisle8491
4 жыл бұрын
TRC Moto vlogs no center stands. The shock has constant pressure on the lowering links even with the back wheel off the ground it’s tense on the shock bolt at the lower links
@Anthonymayn
4 жыл бұрын
Sixwheel Carlisle were you able to do it
@sixwheelcarlisle8491
4 жыл бұрын
Anthony Mayn I got the nut off (gigity gigity) but couldn’t pull the bolt out (that’s what he said) because the swing arm was in the way 🤦♂️😖🤷🏻♂️ i’m at a loss for words and temper with this bike.
@Anthonymayn
4 жыл бұрын
Sixwheel Carlisle I was able to do it with a friend. We lifted the backend of the bike with a engine hoist and removed the right side foot brake so we could reach the nuts and bolts. We got the first two out no problem then the last one was hitting the frame of the wheel so we jacked it up to take the exhaust off and then lowered it all the way so the bolt was higher than the frame. After that it was simple just put the new bracket on. But the bracket I bought did cover the right side compression adjuster so we had to cut a piece off the bracket.
@tennekeystunts1694
5 жыл бұрын
How did you guys get the bottom bolt at the dog bone out I'm stuck at this part
@paulrevere4749
2 жыл бұрын
Slip the bushing out the opposite way first, and the bolt comes right out. Sadly enough, you're probably not working on it still!!!
@WARAAA_V1KK
Жыл бұрын
how much lowered ?
@kennycrull4570
Жыл бұрын
Please get rid of the music 👂
@futshballl5909
4 жыл бұрын
saludo ,una pregunta por favor estoy mirando su video y me a gustado muchos ,justamente lo que yo necesito ,pero no se ,donde conseguir la pieza para ,hacer la adaptacion porque la busco y la encuentro diferente
@dahoncbr
4 жыл бұрын
www.ebay.co.uk/itm/232779993524
@cscbarnsley1941
4 жыл бұрын
Better than nought I suppose - but its a poor video.
@mybikerlady1
4 жыл бұрын
Terrible music no explanation
@ipostuplenie
4 жыл бұрын
Congrats! You ruined geometry of your bike... great!)
@maxspeed06
4 жыл бұрын
It's his bike, if you don't like the concept don't watch the video.
Пікірлер: 26