“Did I lower it enough?” It’s never enough... I’ve always loved that first generation body-style...I always wanted one. I had a couple of friends who had them. I did put a clutch in for my one friend who wasn’t mechanical. Your truck looks good, I like it!
@geraldscott4302
5 ай бұрын
I have a '93 S-10, 2 door, 2 wheel drive, short bed. It came with a 2.8L EFI V6 and a 5 speed. It now has a carbureted 383ci V8 and a Muncie "rock crusher" 4 speed, as well as a Ford 8.8 rear axle. I didn't lower it. I wanted it to be drivable. I put 225/70-14 BFG Radial T/As on 14x6 Camaro Rallys in the front, and huge 275/60-15 Radial T/As on mid '70s 15x8 Corvette Rallys in the rear. Quite a few other things too, but that is the big stuff. I tried my best to make it look like an early '70s muscle car, and I think it turned out well. It has a true dual exhaust out the back, with glasspacks, and just over 400hp at the rear wheels at 5400 rpm. Burnouts are super easy. It's almost hard not to do one. You have to take it easy on the pedal. I bought all new aftermarket reproduction rally wheels, trim rings, and center caps. The 14x6 Camaro and 15x8 Corvette rallys are exactly the same other than size. All in all I have over $2000 into tires and wheels. Did you check the pinion angle? It needs RWL tires, trim rings, and a cowl hood.
@Str8sixfan
3 жыл бұрын
Casey, the jazz hands sold it. Looks good man!
@jamesgoode5079
3 жыл бұрын
Looks good man. Perfect height, because you can always put bigger wheels and tires on it, for when you need more traction for the extra bald eagles you get from that 8 cylinder in the shape of a V. Hahah.
@NarxolepticCustoms
3 жыл бұрын
Yes!!! Cruising with the kid, super cool trip! "Come on Dad, I'm youtubing in here!!" Music is great with this one man!! The wheel sanding at @8:00 is genius!!!! Truck looks great man!!
@PatinaPitstop
3 жыл бұрын
I had a buddy message me and say he was cringing the whole time I was sanding. Sometimes genius and madness are not to far apart!
@allencobbs4047
3 жыл бұрын
Looks really good
@domingojaramillo3331
2 жыл бұрын
👏👏👏beutyful truck i have a 89 chevrolet s10 and i am working on it ilove my truck
@HardCoreGarage
2 жыл бұрын
Looks good man.
@angrybadger8136
2 жыл бұрын
Reminds me of my Dad and me in his old S10 when I was a kid..
@RakingNcash
Жыл бұрын
I’ve lowered 2 of my s10’s and kept the shocks from factory. After researching extended and compressed lengths of factory shocks versus Bell tech. Theres hardly any difference in measurements between them.
@dontheplumber9338
Жыл бұрын
Very cool!
@jessehess4272
2 жыл бұрын
Definitely looking forward to more content on the s10..
@PatinaPitstop
2 жыл бұрын
Roll pan coming soon!!!!
@kentaylor7428
Ай бұрын
@@PatinaPitstoplooks good man. can I run my 14's with 2in. spindles 91s10 2.8 2wd thanks
@PatinaPitstop
Ай бұрын
@@kentaylor7428 It should work without an issue
@DansGarageNC
3 жыл бұрын
Truck looks great lowered, look forward to seeing the wagon again.
@tomschweikert9537
2 жыл бұрын
I love chevy rallies, I have them on my El Camino
@dennisclark1262
Жыл бұрын
Looks good.
@615theBuzzard
3 жыл бұрын
Yeah should of went lower. But it still looks good. If you v8 swap that thing you will definitely need to change out the front springs. Love the name! Shane Falco 😂😂
@PatinaPitstop
3 жыл бұрын
I know. I wanted to keep it a daily but I definitely could have went 3 in front and 4 in back.
@615theBuzzard
3 жыл бұрын
@@PatinaPitstop my s10 is 4 and 4.
@bradleydunford725
3 жыл бұрын
What size corvette rallies are they what backspacing and what size tires
@allencobbs4047
3 жыл бұрын
I have an 1986 extended cab 2 inch drop spindles and 4 inch lowering leafs in rear with 383 under hood
@tomschweikert9537
2 жыл бұрын
Ill run ya with my 383 powered modem a sedan. The bullet holes help aerodynamics.
@tacodave3245
2 жыл бұрын
Perfect .
@raymurray1015
2 жыл бұрын
Looks good I like it I dropped my 86 s10 the same high they look better lowered
@kentaylor7428
Ай бұрын
a long shot 3 year old video but here it is I want to do a 3-2 on my 91 what size tires and rims you running with them 2in drop spindles I can't seem to get answer on line. can I run my stock 14's
@PatinaPitstop
Ай бұрын
You should be able to run the 14's. You are limited with tires sizes though. I would run a 235/60r14 front and back.
@Poorboyzgarage447
Жыл бұрын
I have an 86 but I noticed yours dosent have a dome light in the cab? I guess these trucks could get really bare bones if you wanted them to lol
@Dboyquicks10
2 жыл бұрын
Looks good. I don't like it when they're dragging their belly.
@dano4572
3 ай бұрын
Wheel sizes!! Offsets!!??
@PatinaPitstop
3 ай бұрын
Stock factory rallies. 15x8 in back 4 inch backspace I think. 255/60r15 tires. Fronts are 15x7 with 4 1/4 backspace i believe. 215/70r15 tires but i think 215/65 would look better
@dano4572
3 ай бұрын
@@PatinaPitstop thank you, sir!!
@sclabough
7 ай бұрын
What are you running for a tire size?
@CampfireTalesYT
Жыл бұрын
nope, 2 more inches and put some 13 inch gold daytons on it lol
@timheller5929
2 жыл бұрын
Looks pretty sweet.I am about to buy an 88 S-10. I want mine to sit lower, did you put a 3" in the back and 2" in the front?
@PatinaPitstop
2 жыл бұрын
Yep. Probably should've done the 3-4 kit
@tc7584
Жыл бұрын
Looks great! I have a 2/3 beltech kit with no shocks. The stock rims are 14s did you bump it up to 15s?
@PatinaPitstop
Жыл бұрын
Yes, 15's all the way around
@leecourvelle1961
Жыл бұрын
What are the rims off of
@datnotme9921
Жыл бұрын
What size are those rally rims? I just bought an '87 S-10. It has original wheels on it, but came with rally in bed. They're 15×7 with 1" spacers. I like my tires to be tucked under wheel well and not sticking out. Would that size (15 × 7 rim) stick outside the fender? Nice truck!⚡👍⚡
@PatinaPitstop
Жыл бұрын
They will be tucked under without a spacer. My truck had 7's on the front and 8's in the back
@datnotme9921
Жыл бұрын
@@PatinaPitstop your 7s in front rub on turns or No problems? Thanks for the info. Much appreciation
@PatinaPitstop
Жыл бұрын
Very close to the tie rod ends. A big wheel weight might rub but that's it. I would recommend a 215/65R15 tire on the front.
@ignaciobecerra1301
11 ай бұрын
I bought a lowering kit for my s10 but I noticed it said extended cab is there a difference between the single and extended cab drop kits?
@dougbogard
2 жыл бұрын
Purrffect
@careygale2315
2 жыл бұрын
Looks good 👌. I have a 92 S-10 it's been lowered also. I also have a 383 stroker and it didn't lower the front at all 🤷♂️. Are you doing anymore to it?
@PatinaPitstop
2 жыл бұрын
I'm trying to decide. It definitely needs AC, and a V8....and a 5 speed. 😁
@careygale2315
2 жыл бұрын
@@PatinaPitstop oh yes definitely needs the V8. I don't have AC either but didn't need it growing up in Alaska lol. I'm building mine like a street legal type. I used Chris Alston chassis works for the back half with a 4 link set up. Still need to finish the suspension and figure out which rims and tires to go with
@jamesbowen1093
3 жыл бұрын
I think we work at the same place I see a truck just like this in the parking lot
@PatinaPitstop
3 жыл бұрын
In Lebanon?
@jamesbowen1093
3 жыл бұрын
@@PatinaPitstop yes sir
@sotos2428
2 жыл бұрын
What kind of backspace wheels do you using? I lowered mine with 2” spindles and now I can’t go no where bc the wheels hits the tierods
@PatinaPitstop
2 жыл бұрын
They are stock rally wheels. 15x7 in front 4.25 backspacing I'm guessing. Very very close to the tie rods too.
@sotos2428
2 жыл бұрын
@@PatinaPitstop I have some after market 18s but all I know I’m stuck
@wiltonmaxey9589
2 жыл бұрын
What size rear tire did you use?
@PatinaPitstop
2 жыл бұрын
255/60R15
@Jhasonoc
Жыл бұрын
size tire?
@RM-fu8yb
2 жыл бұрын
Looks like mine should. How does it ride and handle?
@PatinaPitstop
2 жыл бұрын
Handles good, a little stiff in the rear but not too bad.
@RM-fu8yb
2 жыл бұрын
@@PatinaPitstop Debating doing same to my 91. Probably dumb question, would air shocks on the rear help or not work at all?
@santiagocontreras7968
2 жыл бұрын
Looks good but still to high.
@tomschweikert9537
2 жыл бұрын
is that malibu wagon for sale?
@PatinaPitstop
2 жыл бұрын
Probably never. 😊
@jonathanhankins790
2 жыл бұрын
What options did u have to do a 3/4 drop? I have a 89 and wanting to lower it for now but not slam it just yet ? I like the 2/3 but would rather go 3/4...theres alot of wheel gaps in these trucks
@PatinaPitstop
2 жыл бұрын
I use Bell Tech. Pretty sure the only difference is it will include a lowering spring in the front. And 4 inch blocks in the back.
@jonathanhankins790
2 жыл бұрын
@@PatinaPitstop i would rather use the drop spindles..just my preference...but i would also like to level mine...ya know now have any rake at all to it...i watched another video of a guy doing a red one like yours and used the 3 inch blocks in the back and another inch in drop shock to get the even height for 2/4 drop. Mine has the 4.3 v6 also.
@jonathanhankins790
2 жыл бұрын
@@PatinaPitstop also what size wheel/tire are you running ?
@PatinaPitstop
2 жыл бұрын
Rear is 8 inch wide wheels 255/60. Front is 7 inch wheel 215/70 but I wish I would have went with a 215/65
@jonathanhankins790
2 жыл бұрын
@@PatinaPitstop what size is ur wheel ? Any advice in the pieces to level it. I'd really like to not have any rake, just lowered and level ya know. How do u determine the rake also ? (I know I could probably google it but obviously your got 1st hand experience and im wanting to do a lot of the same to mine)
@tomschweikert9537
2 жыл бұрын
could go a little lower its good tho
@sandysandor1699
2 жыл бұрын
4"/5"
@tomschweikert9537
2 жыл бұрын
save your money and throw a small block in that s10
Пікірлер: 77