Sure would have liked to see the after shot. Thanks for the great explanation on how it's done.
@isaaclucas5748
5 жыл бұрын
Ok I will soon
@ScottieCinnamon-oz7yf
Жыл бұрын
What length is the lowering bar you used?
@War_machine_986
Жыл бұрын
What size socket 14mm or 9/16
@geraldvoss5494
5 жыл бұрын
Hey Isaac, how did your bike handle after you lowered it, do you know what's the maximum a c50 can be lowered in the rear, also, did you lower the front suspension any?
@isaaclucas5748
5 жыл бұрын
Hi Gerald the ride great and I only lowered the rear. I’m not sure how low you can go, keeping safety in mind.
@saxologist1
5 жыл бұрын
I lowered mine 2" front and back. Handling much better in my opinion. You have to be careful not to take turns too fast because you'll scrape foot rest on asphalt. The bike looks awesome when lowered.
@bbolck27
4 жыл бұрын
Gerald Voss I have mine lowered 4” that’s the lowes you can go and that depend on your weight and eather way won’t be able to take passengers
@jesse21473
4 жыл бұрын
@@bbolck27... I'm lowering mine 3"... that means my wife won't be able to ride with me?
@bbolck27
4 жыл бұрын
@@jesse21473 depends on weight of both riders its pushing it for sure but I have riding we passenger's with a 3" drop but shock has to be in stiff position
@bigwheel53
5 жыл бұрын
I don't know what im doing wrong but I had the bike off the ground..on the ground and theres still a lot of pressure so I cant gat the bolts out. What am I doing wrong??
@isaaclucas5748
5 жыл бұрын
Once you jack the rear end and the tire barely on the ground put the nut on the bolt for you damage the bolt tip, then tap it with wood or rubber hammer to free the bolt. Once the bolt is loose the bike may have go up or down a little to remove the bolt
Пікірлер: 16