In general, the TI units are faster in response to inputs. This is seen when quickly switching between sonar, downscan, chart, and split screens kzitem.infoUgkxeAxH15LxhjGlg5-CRYqjTGTEH0tbY4vk recommend The Hook units will show some lag on button pushes and screen switching. The big ticket item though is maps. If you install a mapping card such as Navionics or the free C-Map Genesis which has a lot of map detail, then moving around the map with the cursor or when running down the lake can lag significantly on the Hook units, but is seamless with the TI units.
@805soung
6 жыл бұрын
Awesome video bro, just bought a elite 12 ti. And it's giving me this problem. This video will come In handy.
@chrisfish1970
5 жыл бұрын
Realy good video! Great practical tips on setting up the transducer, very helpful!!
@brianboudreau6083
7 жыл бұрын
Thank you for taking the time to make this video.
@darrylhenchie4765
5 жыл бұрын
Just got one. Thanks for the heads up on positioning Otis.
@wino4
Жыл бұрын
Very helpful video. Mine original transducer got whacked buy something when fishing in Mexico. Had to get a whole new bracket. Wasn’t sure how high to mount it. Now I know why I wasn’t metering at speed.
@martinj8732
3 жыл бұрын
Thanks for the assist. This issue has frustrating me to figure out on my ti7
@hollybrit09
7 жыл бұрын
it works perfect now it is very easy to pinpoint fish when using all 3 sonar, down scan and structure scan at the same time
@malcolmnuku6807
7 жыл бұрын
very informative and also entertaining video Otis .I like your style keep up the good work..cheers
@thejwchannel3137
6 жыл бұрын
Good on ya Otis howdy from Australia!
@larrylazure4288
5 жыл бұрын
Finally a video that explains proper placement and is spot on. Thanks
@hollybrit09
5 жыл бұрын
Lol your welcome
@robbob4872
5 жыл бұрын
The instruction manual that came with mine said the same thing - I put it on and it worked perfectly...
@Lear356045
7 жыл бұрын
nice explanation i will confirm it installed leveled like you show with your straight edge. how from the most right end edge you installed the transducer ?
@damandany2k
3 жыл бұрын
Same issue thanks for the tip!
@BuenaVistaMar
6 жыл бұрын
Thanks me friend, so helpful for me you explanations .
@jeffresler2228
7 жыл бұрын
good video what kind of metal is your bracket out of and what kind screws and sealent u done a hell of a job
@ericdanish3677
5 жыл бұрын
I have just Purchased the same unit great video thank you for the tip....My biggest question I have with watching all the videos on the Internet...Am I supposed to level the transducer like you did in this video (with the bottom of the boat half in half out of the water) or do i level it with the water line on how the boat Sits in the water? any help would be greatly appreciated
@robertadams1984
7 жыл бұрын
Great looking bracket you've made, thank you for the video. How did it fish - have you had to make adjustments on it - do you lose bottom at speed.,? -Bob
@malcolmnuku6807
7 жыл бұрын
very useful info thanks & cheers
@obscur156
7 жыл бұрын
Sonar acting up when too hot,thats a big issue from Lowrance.I taught i was gonna buy that one but you are making me think twice before buying this sonar.Thanks for sharing that valuable info bud !
@hollybrit09
7 жыл бұрын
yes when the elite 7ti sits in the Sun it will stop working. it will not let you touch the screen anymore usually I will put a cold rag on it and that helps
@obscur156
7 жыл бұрын
I will probably choose another unit without Touchscreen...I dont understand why Lowrance is selling something unusable...Regard
@basilkey2949
3 жыл бұрын
Great video. Just what i needed to know. Thanks ..I just got my elite 7 TI. I have no idea what transducer to in stall. Need one for ever thing the unit will do. Help
@Keep_It_Loaded
6 жыл бұрын
Thxs 4 sharing
@hollybrit09
7 жыл бұрын
3/16 aluminum plate with rvt silicone and 3/8 stainless steel screws.
@hulkhuggett
5 жыл бұрын
Good tips
@fmadriga
2 жыл бұрын
I have an elite ti7 unit but want to know how tight must the transducer be , mine moves a lot, do you have to let it move up when you take your boat out of the water or just keep it on the parallel way. Please end me a message
@bobbysmith3841
7 жыл бұрын
With the totalscan transducer being so long and sticking out so far have you had any trouble in brushy or rocky areas with the tranducer possibly breaking bracket ?
@hollybrit09
7 жыл бұрын
bobby smith no it still has one bolt on the other side so it can Flex
@donfrederick4825
7 жыл бұрын
Nice bracket and excellent video. I suffer from loss of sonar at plane as well. Can you add instructions in the description on how to make that bracket?
@hollybrit09
7 жыл бұрын
I will see what I can do
@midwestfishing1190
Жыл бұрын
@@hollybrit09 ❤
@smithkart
6 жыл бұрын
I see you have the transducer mounted with wire to the front, does your side scan rear backwards? // I want to change my mount to the new style mount and wire has to run out the front.
@robertdaoud6837
6 жыл бұрын
you can adjust the way reads in your settings.so either way you rig is ok. hope that helps
@jeffresler2228
7 жыл бұрын
thank again
@wish2fish37
6 жыл бұрын
Can't believe you have to put it in a coller either.Did you call Lowrance?I would have.
@dukman24
3 жыл бұрын
What kind of boat do you have?
@chuckcregger8527
5 жыл бұрын
That was my question -- can you turn it 180 degrees without affecting transducer performance? From what you said I'm thinking you can. Thanks good video.
@hollybrit09
5 жыл бұрын
It works the same just flop screen
@scottmccrea9506
5 жыл бұрын
Does it mirror image the sides?
@jeremystikka
7 жыл бұрын
I'm having the same problem with my ti5
@theoduff9517
3 жыл бұрын
Bruh 😉 thanks for the info I mean great info each 1 teach 1 😉 AMEN 🙌✌️💓
@shake-n-bakebassin
3 жыл бұрын
Hey your big moter don't block the side sonar? I got a jon boat and I just got a 7ti and I'm trying to figure out how to mount the transducer
@hollybrit09
3 жыл бұрын
It dose a little in shallow water with the motor trimmed all the way down
@billwest5330
2 жыл бұрын
What about transducer on trolling motor?
@bobbysmith3841
7 жыл бұрын
Ok I may not have been clear on this I was talking about something possibly striking it from the side if your boat was anchored are parked and the back end drifting around and a tree limb or rock hitting it .
@1964krazyeric
5 жыл бұрын
What happens if the transducer is mounted a foot lower than the bottom of the boat? I only use a bow mount terrova on my boat so speed is not an issue. I want to mount it on the bottom of my rudder I built.
@hollybrit09
5 жыл бұрын
I'm sure it will be perfectly fine as long as there's nothing obstructing the left or right side. It could possibly throw off the side scan being on a rudder .?
@mizzouborn
4 жыл бұрын
Some decent info but how do you know exactly the "shiny" line is when you're on plane?
@mizzouborn
4 жыл бұрын
Follow-on - where is the shiny line in conjunction with the bottom of the boat?
@lukemiller2895
6 жыл бұрын
Does your transducer pick up the outboard on side imaging when mounted in this spot?
@hollybrit09
6 жыл бұрын
Luke Miller yes but I only have to trim the motor up a little bit and it works perfect
@lukemiller2895
6 жыл бұрын
Perfect... thank you... I just bought an elite ti totalscan and my transducer won't fit directly in front of the outboard and I was worried about the interference.... thank you
@mattfoley9015
5 жыл бұрын
Did you make the plate or buy it as is?
@hollybrit09
5 жыл бұрын
I made it .
@chadcarr3271
7 жыл бұрын
Just installed a total scan transducer. What a pain in that ass trying to get working on plane. There is nothing in front of it. Just rivets. Which you can't file down. I have dull grey Line even with the bottom of the boat. I get a rooster tail at high speeds. Sometimes lose bottom also. I have adjusted it up and down. Same results. Also. It's a elite ti 9". Like the unit. But nightmare transducer.
@hollybrit09
6 жыл бұрын
Chad Carr mine still loses bottom sometimes in saltwater not sure why
@snowismas
7 жыл бұрын
I don't have the total scan version, but my downscan version is always in the sun, its never given me any trouble with heat.
@hollybrit09
7 жыл бұрын
is yours the touch screen version mine is Lawrence Elite 7ti
@snowismas
7 жыл бұрын
Otis Pye Yes it's touch screen. It's the Elite TI 7". I only have trouble when the screen and my hands are wet, then it's hard to use.
@zachwalls461
4 жыл бұрын
What boat looks like my 2010 tracker pro guide deep v
@hollybrit09
4 жыл бұрын
2015 Tracker Pro 160 mod v
@BassMonkey
7 жыл бұрын
is that how your boat sits in the water when your ideling the way its sitting on the trailor
@hollybrit09
7 жыл бұрын
Bass Monkey yes I leveled the water marks on the side of the boat
@hollybrit09
6 жыл бұрын
Bass Monkey Fishing this video is all about not keeping up while on plane so idling doesn't really matter
@johnhorn7865
6 жыл бұрын
Sad that they had to add weld to create drag........ easier to add weight to nose ..or put trim fins on cavitation plate
@hollybrit09
6 жыл бұрын
John Horn you could put a hundred fifty pound person and a 50 quart cooler full of ice and beer in the front it would still porpoise I put a Davis XL whale tail on and ground the weld off now it works fine
@Th3mast3r69
6 жыл бұрын
you lowrance guys have to put your damn head units in a cooler to use them on a hot day? LMAO im glad i chose humminbird
@John_D2
2 жыл бұрын
I've had more problems with my lowrance. I'm gonna sell it and get a garmin.
@hollybrit09
2 жыл бұрын
That's what I did LOL
@John_D2
2 жыл бұрын
@@hollybrit09 how do you like the garmin ? thanks
@hollybrit09
2 жыл бұрын
@@John_D2 my Garmin doesn't overheat and I'm on the same transducer for over a year I went through three Lawrence transducers
@John_D2
2 жыл бұрын
@@hollybrit09 thanks brother im def done with lowrance. thanks for the heads up.
Пікірлер: 75