Thanks for watching guys 🔥 after posting I realised that the transducer is sitting higher then I wanted, but we make mistakes, this is getting fixed, new video coming out soon 👌🏽
@8gxer
4 жыл бұрын
I'm new here, why isn't this more popular! This is one of the best and informative series I've watched. Binged the entire series today. Keep up the good work mate.
@AngryMackAdventures
3 жыл бұрын
Glad you enjoy it welcome to the channel! thanks alot mate for the kind words!
@greatwhitesfishingadventur2273
4 жыл бұрын
Wiring is looking very neat !! Transducer looks a tad high, and too close to the rake fin ... Should have used a straight rule under the keel, and levelled it off from there ...
@AngryMackAdventures
4 жыл бұрын
Thanks Michael,Yes transducer is a little high, be fixed in next video, thanks for watching :)
@bobguy6511
4 жыл бұрын
I have just installed the same transducer on my boat. I will be interested to see how yours performs. It looks to high to me and might get some disturbance from locating it close that strake under the boat
@AngryMackAdventures
4 жыл бұрын
Bob Guy thanks for that bob it is! There will be a video in the next day or two fixing this issue! Thanks for the comment :)
@bobguy6511
4 жыл бұрын
I glued with epoxy a piece of 10mm thick plastic cutting board to the transom and screwed the transducer to it. No holes in the transom that way
@jasonibrahim4701
4 жыл бұрын
Great refurb! Would love to do this on my boat but I’d never be able to pull it off. Great work!!
@AngryMackAdventures
4 жыл бұрын
Jason Ibrahim thanks a lot Jason! Ha ha a lot of work mate!
@cameronmcveigh7060
4 жыл бұрын
Keep it up lad boats looking mint! Your going places ❤️
@MadForFishing
4 жыл бұрын
Great work on the subs 👍 love watching your boat build keep it up.
@mitchellkaeding8600
4 жыл бұрын
Great video mate love the content and chilled tunes, dont stress to much on fitment as you'll find you'll have to fine tune the position once in the water and seeing how your chines affect it. Maybe a 1kw on the other side of motor 👌
@AngryMackAdventures
4 жыл бұрын
Mitchell Kaeding hey mate thanks for watching! I changed location on transducer today, my mistake mounting it where I did but yes a 1kw is definitely in the books 😂
@adambowditch6134
4 жыл бұрын
I'm so keen to see it in the water. Hurry up! 😊
@AngryMackAdventures
4 жыл бұрын
Adam Bowditch HAHAHA soon mate 😂
@danielcostandi6745
4 жыл бұрын
CONGRATS ON 3K!!!🎉
@AngryMackAdventures
4 жыл бұрын
Daniel Costandi thanks a lot Daniel! Glad your enjoying the content 🔥😏
@floridaflyfishing3457
3 жыл бұрын
you should have over drilled the holes filled them with the ?"bogg"? then drilled through the middle of that for the mounting hardware. This method is much less likely to allow water intrusion into the transom over time.
@floridaflyfishing3457
3 жыл бұрын
you can still do this when you have to adjust the height of the transducer.
@AngryMackAdventures
3 жыл бұрын
@@floridaflyfishing3457 hey mate thanks for watching! Yes great idea, many ways to do it that's for sure, im thinking of using epoxy and gluing a mounting bracket, but see how we go later down the track! :)
@josztroutfishingdiary7350
3 жыл бұрын
Cool Mack. Thanks!
@AngryMackAdventures
3 жыл бұрын
Thanks for watching!
@claytonm1089
4 жыл бұрын
In a matter of time you will be at 5k subs 🎉 congrats
@danielcostandi6745
4 жыл бұрын
Oath I’d say more than that
@joepsaila2837
4 жыл бұрын
Hi there Nick i just started following your channel I installed.a Lowrance elite ti2 9 inch I thought that the traducer should be level with the bottom of the boat cheers 🎣
@AngryMackAdventures
4 жыл бұрын
joe psaila hi joe thanks for subscribing! Yes it does if not 5mm below, I made alittle mistake and fixing in next episode, thanks for watching :)
@nobs7199
4 жыл бұрын
Not taking anything from you. I love restoring boats myself and I think you did a good job on that one. That being said, I don't like penetrating my hulls with anything, for any reason. I learned my favorite way to mount an external transducer, is to prepare a half inch piece of plywood with "glass'' and paint it. Then, trace it with a pencil where you want it, get the shine off that area with some fine sand paper and epoxy the new piece to the hull. Mount your transducer to that... We live and learn... Good luck and control that anger!
@AngryMackAdventures
4 жыл бұрын
NO BS hey mate thanks a lot for the top! I definitely think this is a great way to mount on the transom considering how scary it is drilling through it 😂 maybe this is still something to consider 👌🏽 thanks for watching !
@danielcostandi6745
4 жыл бұрын
Back within a minute to see the progress 😅
@aidanrolls8201
4 жыл бұрын
keep it up brodie jnr
@puchen07
4 жыл бұрын
Low rance?? What is this brother??❤️🔥🔥🔥
@anthonyterranova280
4 жыл бұрын
has anyone told you that you have a great talent for youtube?
@AngryMackAdventures
4 жыл бұрын
Thats very kind words, thank you!
@Ken-fisho
3 жыл бұрын
Hey just curious what did u pay for the Hds 9
@AngryMackAdventures
3 жыл бұрын
Hey Ken, a friend that works in the boating industry hooked me up :)
@ramasamyranjan8756
3 жыл бұрын
Where are you country bro
@AngryMackAdventures
3 жыл бұрын
Perth, Australia mate :)
@adamvadala1983
4 жыл бұрын
You may need to lower the transducer, probably not going to read at speed being that high
@AngryMackAdventures
4 жыл бұрын
Adam Vadala hey Adam yes it is, fixed this issue in next episode, Thankyou for watching !
@maxsr3236
4 жыл бұрын
The fish can try to hide, but they won't succeed.
@thesajeguy
3 жыл бұрын
0 dislikes like it should be!
@MrZebbyz
Жыл бұрын
Not really shows anything to do with installation, nothing about what cables go where, what wires connect to what. Shows the unit screwed to a dash. Not really rocket science that.
@AngryMackAdventures
Жыл бұрын
Hey guy thanks for the reply, by the title it’s not a How to video per say, just a install video onto my boat :) Merry Christmas 🎄
Пікірлер: 46