An entire video of him scraping the binding , yet I still watched it. I'm doing almost the the same except my first was a dark brown and I'm not sun bursting it. He's very good.take a bow
@SpiritFJT
5 жыл бұрын
If you fall asleep while watching, you will be awoken at 4:30 !
@hkshahidi2794
21 күн бұрын
Sehr gut... ehrlich! Eine Frage: warum haben Sie das Binding nicht getaped vor der Schicht? Ich meine, macht das die Arbeit nicht einfacher? Danke schön.
@VittorioCentofanti
21 күн бұрын
@@hkshahidi2794 Vielleicht ja. Aber die Farbe läuft auch unter das Tape, und dann muss man das Binding auch wieder reinigen.
@paulolopes3726
3 жыл бұрын
😁👏👏👏
@squi9935
4 жыл бұрын
Beautiful job! What did you use to dilute your dye? Water, alcohol?
@VittorioCentofanti
4 жыл бұрын
The colors from Stewmac are liquid and they are waterbased.
@neighborscomplaint6859
3 жыл бұрын
Beautiful work. Love the reverse chevron flame. Your sunburst finish and inlay work is so beautiful!. What song is that in the first half of the video? I hear it used a lot on KZitem. Is that Phil Manzanera?
@VittorioCentofanti
3 жыл бұрын
Thank You. The song is Don't Look from Silent Partner. It's from the KZitem Audio Library.
@neighborscomplaint6859
3 жыл бұрын
@@VittorioCentofanti Great thanks!
@mat2941
5 жыл бұрын
I wouldn’t think ypu could achieve such a nice burst with just dye.. could you please share the brand of dyes you used and the shades?
@VittorioCentofanti
5 жыл бұрын
The Dyes are from Stewmac USA. ColorTone Liquid Stains.
@allthings1150
4 жыл бұрын
That stain made that top start dancing
@sven4388
9 жыл бұрын
Super Arbeit und wirklich hilfreich die videos. Hätte aber 2 fragen. Mit was hast du das Binding gesäubert? Und in dem video vorher beim body beizen welche 2 Farben wurden da verwendet?
@VittorioCentofanti
9 жыл бұрын
Freut mich wenn ich helfen konnte. Das Binding habe ich mit einer Rasierklinge gesäubert. (Muß absolut scharf sein) Die Grundfarbe ist Vintage Amber (Gelber Farbton), der Burst ist eine Mischung aus Orange und Red Mahagoni. Alle Farben sind von Colortone von Stewmac aus den USA.
@brankojer4850
5 жыл бұрын
Guten Tag. Was würde es kosten das Body nach eigenem Wunsch von Ihnen zu färben und lackieren? Danke
@VittorioCentofanti
5 жыл бұрын
Hallo, je nach Auswand zwischen 300 und 500€. Kann aber zur Zeit keine Aufträge entgegen nehmen.
@brankojer4850
5 жыл бұрын
@@VittorioCentofanti Habe Ihnen freunschaftanfrage auf Fb geschickt. Werden Sie es wieder machen oder hören Sie ganz damit auf? Danke für die Antwort
@VittorioCentofanti
5 жыл бұрын
@@brankojer4850 Ich werde weitere Gitarren bauen. Momentan reicht es aus Zeitgründen nicht, da meine Werkstatt im Umbau ist.
@VittorioCentofanti
5 жыл бұрын
@@brankojer4850 Farben sind ColorTone von Stewmac aus den USA.
@brankojer4850
5 жыл бұрын
@@VittorioCentofanti Danke dir. Werde dann zu späteren Zeitpunkt auf dich zurück kommen
@Steyc89
9 жыл бұрын
Wirklich tolle Arbeit! Hast du den Body gekauft oder selber gemacht? Plane das selbe Projekt.
@VittorioCentofanti
9 жыл бұрын
Erstmal Danke für Dein Lob. Nein den Body habe ich nicht selbst gemacht. Habe nicht die Gerätschaften dazu. Den habe ich bei www.gitarrenbastler.de/index.php gekauft. Hat dort wirklich tolle Bodies und Hälse. Sind nicht gerade billig, aber dafür von sehr guter Qualität.
@kweksoongyong5170
4 жыл бұрын
If the time-lapse could be bit slower!
@michaelpollina8034
4 жыл бұрын
As I am very new to all this and I don't play a note, I have one question? how the heck is he getting that wonderful white edge on this body. Thanks for any help. By the way I will learn a few notes and chords to test my builds.
@michaeltaylors2456
4 жыл бұрын
Very fine and cautious scrapping with a razor
@VittorioCentofanti
4 жыл бұрын
this white edge is a cream ABS Binding.
@TheLegendaryDoc
7 жыл бұрын
Eine Nahaufnahme wäre schön gewesen....
@SandyHookFalseFlagOP
8 жыл бұрын
beautiful job, i'm working on my 58 Gibson just going to do touch ups on the front and edges and refinish the back es.audiofanzine.com/guitarra-electrica-hollow-body-semi-hollow/gibson/ES-125-T/multimedia/imagenes/a.play,m.606496.html it was separating where the neck met the body and i used a P10 glue to repair it and finally after all these years i can finally play it, here is the front photo es.audiofanzine.com/guitarra-electrica-hollow-body-semi-hollow/gibson/ES-125-T/multimedia/imagenes/a.play,m.624222.html
@chrishorton615
5 жыл бұрын
Pretty guit fiddle
@reallyyouthful
5 жыл бұрын
Shame about the captions English would have been better
@rhodan3086
4 ай бұрын
Was ist ein Binding?
@VittorioCentofanti
4 ай бұрын
Das Binding ist der weiße Rand (ABS-Streifen)
@rhodan3086
4 ай бұрын
@@VittorioCentofanti ich bin gerade dabei die Reihe durchzusuchten. Respekt für die Geduld und Präzision bei dem Projekt.
Пікірлер: 34