You give some of the best detailed instruction I have “ever” seen. Keep up the excellent work.
@miillersconstruction
8 ай бұрын
Thank you! I feel like there are so many instructional videos out there that skip important details. I want to make sure I fill that gap. Thanks for watching.
@user-kq4cf2id5c
5 ай бұрын
great video, will be installing this product for the first time this summer and this video already brings up my confidence level on the installation. Great job and thanks again.
@miillersconstruction
5 ай бұрын
Awesome man! Glad you enjoyed it. Its a great product. If you can afford it, I HIGHLY recommend Diamond Kote. They take engineered wood siding to the next level. And 30 year no fade warranty!
@DBrisky37
4 ай бұрын
Is the prefinished LP siding done by diamond Kote or do you have to request it specifically
@miillersconstruction
4 ай бұрын
@@DBrisky37 two completely different company's. Diamond Kote takes primed LP Smartside and makes it better with their finish and innovation such as rigid stack and rabbeted nail fin trim. If you can afford it, diamond Kote is a far superior product.
@DBrisky37
4 ай бұрын
@@miillersconstruction thank you for the clarification!
@justinkinlaw5728
Жыл бұрын
This was a great video, thank you for sharing
@miillersconstruction
Жыл бұрын
Glad you enjoyed! Thanks for watching
@AAJungleCat
Жыл бұрын
Great video! Thank you.
@miillersconstruction
Жыл бұрын
Glad you enjoyed!
@mikejena06
Жыл бұрын
Great video. Thank you
@miillersconstruction
Жыл бұрын
Thanks!
@Adam666...
Жыл бұрын
I like to run a nice clean bead of caulk and then take dawn diluted with water in a spray bottle, spray it down and it wont smear outside the original bead line. We use the Dimond kote screws with the plugs and then paint the plugs, looks flawless. That's my 2 cents
@miillersconstruction
Жыл бұрын
Where do you use the plugs and screws? We use them on the starter boards but that's it.
@PhillyFixed
2 ай бұрын
I would totally use PVC for trim as you can get it pretty much anywhere, but my trim color is a dark blue similar to yours in the video, and it's impossible to get "vinyl safe" paint that dark. Had to shell out $$$ for the Truexterior/Boral.
@miillersconstruction
2 ай бұрын
I'm a big fan of PVC trim as well when it makes sense. We have converted to LP for most of our exterior trim though. When installed correctly, you won't have an issue.
@PhillyFixed
2 ай бұрын
@@miillersconstruction my reservation on the LP trim is that the sides have voids. How do you handle situations like corners where an edge will be exposed? Do you just hit it with filler? (I've only purchased primed, not factory finished. Maybe the finished pieces don't have that issue ..)
@miillersconstruction
2 ай бұрын
@@PhillyFixed finished trim isn't as bad, but it still has some voids. I don't do anything with it. The manufacturer tells you that you don't have to and they'll still warranty it. I've been installing it for a long time and never seen it fail. Remember this isn't OSB. It's completely different even though it looks similar.
@briansdumbchannelderpy6986
Жыл бұрын
First off, I don’t know how I ran across your channel but I have been watching every hour of smart side video I can to learn about the installation process. Quick question for you, have you ever installed this over a house that was sheathed with rigid foam? We just purchased a house that was built in the early 90’s and has no sheathing. The little bit of information I can find about installs like this say the foam flexes and breaks or weakens the nails??? I’ve also thought about using firing strips as well . What’s your thoughts? Keep up the awesome videos
@miillersconstruction
Жыл бұрын
f you install Smartside over just rigid insulation instead of structural sheathing you absolutely will not get a warranty. The furring strips would definitely work, but I'm still not sure you would get a warranty. I would contact LP directly about that issue as I've never ran into it in the field before. Unique situation that's for sure!
@briansdumbchannelderpy6986
Жыл бұрын
@@miillersconstruction thank you and I look forward to your future videos
@briansdumbchannelderpy6986
Жыл бұрын
@@miillersconstruction I looked again and it appears that LP allows the lap siding to be installed over rigid foam sheating . Look under application instructions in the LP installation instructions. I’m looking for someone who has experience with this type of install .
@miillersconstruction
Жыл бұрын
@@briansdumbchannelderpy6986 man thanks for letting me know. I was curious about that. You need to reach out to the kruse brothers on Instagram. They work for LP and can guide you through the process.
@briansdumbchannelderpy6986
Жыл бұрын
@@miillersconstruction thanks again!!! I look forward to your future videos
@zachwilliams7400
2 ай бұрын
How do you clean lp siding? Can you use any cleaners to spray on and wash off?
@miillersconstruction
2 ай бұрын
Yes no issues with standard house wash.
@BryanWidemon
4 ай бұрын
I work at a lumberyard that sales this. Do you have to hit the studs with vertical board and bait
@user-ze7zh4no2b
Жыл бұрын
Quick question: I just bought a home that had LP Smartside installed in 2018 and know nothing about it (or any siding really). Our home inspector mentioned he thought the siding was installed wrong since the butt joints were caulked. He was also unsure if there was flashing in between the butt joints, which he would usually expect to see. He wasn't familiar with this type of siding but said it seemed unusual to him. The original installation contract states they caulked all seams with Elastomeric caulk except where Z flashing was utilized on top of windows and doors. Does this sound like proper installation? Thanks!!
@miillersconstruction
Жыл бұрын
That sounds like a proper install to me. As long as when they initially Install the siding with a 3/16" gap between the pieces of siding and then caulked it, You should be fine. If there were issues, They would have already been recognizable had that been the case. They actually have at least three different ways to address that 3/16 joint. You can use h clips which I think are ugly but a lot of contractors like them because they're fast. Or you can caulk it. Or you can prime both end cuts and put a piece of flashing behind the joint.
@trevorbradley7461
4 ай бұрын
I have zip-r6 sheathing (1.5" thick) on my house I am building and want to put LP on. Do I need a 3" nail for the fastener for lap siding and 3.5" for the 1 by trim? the sheathing is 1.5" thick and need 1" into the studs, correct? I can't find any siding nail gun that can hold a nail over 2.5" long and just wanted to see if I was correct on this.
@miillersconstruction
4 ай бұрын
This is the cheapest and easiest solution - Paslode Tetragrip. They have a nailer for siding and for subfloors. Get the one for siding. It's a studless nailing system. It's all we use man.
@trevorbradley7461
4 ай бұрын
@miillersconstruction Thanks, does this work for both lap siding and trim, or do you use something different for the trim?
@miillersconstruction
4 ай бұрын
@@trevorbradley7461 for trim I pretty much only use Diamond Kote nailfin trim. No fasteners in the face, attaches to your sheathing with a roofing nail. If you can't afford to put Diamond Kote Pre-finished siding on your house, at least swing for the trim and accessories. Trust me. Money well spent.
@LMDAVE29
7 ай бұрын
I'm planning a small project that's only about 20 Linear feet of siding. Can I screw the LP lap siding instead of investing in a nail gun? I see stainless wafer head screws for fiber cement siding, can those be used for this LP engineered wood?
@miillersconstruction
7 ай бұрын
Fiber cement is different. LP moves A LOT! I would not trust the shear strength of screws myself. And if I absolutely had no other option, I would make sure the screws were a heavy thickness exterior rated screw. I would just hand nail it personally if thats all your going to install. Thats even cheaper LOL!
@LMDAVE29
7 ай бұрын
@@miillersconstruction Thanks for the quick response. Yes, I may just hand nail. Considering the windows/door and corners of the project, there wont be a continuous run piece longer than 4-5'. Thanks again.
@fiorious79
2 ай бұрын
I got that tintable caulk, followed the instructions to a T and its very liquidy. Is there any cure for that ?
@miillersconstruction
2 ай бұрын
Man I ALWAYS put 20ml of paint in mine instead of 30ml for that very reason. I'm not sure why they don't address that issue.
@jamiemarcum8743
2 ай бұрын
Put it in the refrigerator for 1 hour or 2 before you use it
@TheUnofficialMaker
Жыл бұрын
i use T1-11.
@manuelmesa6405
Жыл бұрын
Hi thank for vídeo, I have to used hydro paper or can I used just the tyvek ? Thank you
@miillersconstruction
Жыл бұрын
Tyvek is fine unless you're installing the Vertical Board & Batten Style siding.
@lucasjohnson1467
9 ай бұрын
Who can I have inspect my LP siding on my new house to see if it's been installed correctly for the warranty? I see lots of issues and want to hold my builder accountable. I paid extra for the better siding and I want it to be correct.
@miillersconstruction
9 ай бұрын
Oh man that's a good question, and definitely a good thing to do! I would do it myself if I were you. I would read the instructions thoroughly and then just look it over. Too many LP installers get in such a big hurry man. It's a shame.
@northernadvantageexteriors2991
Жыл бұрын
What size nails did you use for the siding panels ? Did you use the 18GA nails for the panels ? Or just finishing nails for the trims and soffit ?
@miillersconstruction
Жыл бұрын
I only used 18GA nails to stitch the seams together where I added the blocking and construction adhesive on the Soffit and 16GA nails for window trim. The siding panels I used ring shank siding nails .092 diameter. Part of our last build I tried out the new Tetragrip siding nailer from Paslode and my goodness do they hold. I'm hoping LP will approve them soon because you don't have to hit studs when using the nails.
@jiggidyjam
Жыл бұрын
Where are you guys located?
@miillersconstruction
Жыл бұрын
Arkansas
@BG12222
4 ай бұрын
Lost me at wiping your finger on the house wrap.
@mattp4079
17 күн бұрын
Class action lawsuit, major rotting issues.
@miillersconstruction
17 күн бұрын
Vague comment. Nice channel by the way.
@MAGAMAN
9 ай бұрын
So you are going to risk an electrical fire because you are too lazy to get the appropriate size nails? I hope you go out of business before you destroy someone's house.
@nickwronkiewicz4965
8 ай бұрын
Yeah... I liked most of the video, but the "I'm lazy" stuff...
@vvhitevvabbit6479
10 ай бұрын
The best tip when installing LP Smart siding is to not install LP smart siding. It's glorified cardboard.
@mTerraM
10 ай бұрын
I bet you're fun at parties...🤡
@vvhitevvabbit6479
10 ай бұрын
I bet you reply with this exact statement more frequently than you should. Also, if you don't know about the water problems that LP smart siding has, then you should probably do some research. This stuff is absolute garbage and the only ones promoting it are the contractors that are using it to save time/money, and those who were paid to sponsor it. This company has a load of lawsuits against them.@@mTerraM
@2nickles647
4 ай бұрын
So what do you use ?
@vvhitevvabbit6479
4 ай бұрын
@@2nickles647 Fiber cement. Lasts for ages, fireproof, insulative, and easy to maintain.
@mattp4079
17 күн бұрын
👌
@vinnyreichardt106
2 ай бұрын
Lp is garbage
@Abuzz700
Жыл бұрын
This company is deplorable. I have a half finished siding job on my house because Series 76 LP Smartside 8-inch Cedar apparently does not exist anymore. It became very scarce during the pandemic after I'd started my project, then prohibitively expensive, now is nowhere to be found. Shame on LP. There was no warning and when I inquired, empty promises of coming product for over a year instead of the truth. Run away from this company fast.
@nickwronkiewicz4965
8 ай бұрын
I just did a job with that exact siding from Menards.
Пікірлер: 65