How To Fill Cracks, Holes and Deep Scratches In Leather LRC23 With The Leather Heavy Filler.
Coloured Heavy Filler is designed for pigmented leather and vinyl - not to be used on aniline, suede or nubuck.
Easy To Use
Very Flexible
Coloured Filler
Fills holes, cracks and scuffs
Durable
The Coloured Heavy Filler is a unique Repair Compound used to fill in surface abrasions, scuffs and holes in leather. Heavy filler is designed for use in high wear areas, like seat bases, cushions, car seat bases, car seat bolster, arms of chairs and sofas etc It's a thick coloured paste and so it can be easily rubbed into the damage of the leather, allowing it to hold the leather fibres tightly together creating a strong repair as well as a smooth one.
You can also mix the Leather Colourant with this filler to match the leather colour making the repair better and enabling you to get a better more invisible finish. The filler repair compound, produces a natural look and feel, can be grained by stippling the filler on, creating an uneven finish, then lightly sanded back and coloured over the top.
The heavy filler has excellent adhesion properties, won't shrink, crack or peel off, once applied correctly, its thick viscosity and has an excellent shelf life. The Coloured Heavy Filler has a flexible finish so it won't crack. It may need several applications to ensure of a perfect repair.
Instructions - How To Use
Do Not use on Aniline, Suede, Nubuck or absorbent materials.
Clean the area, first of all, to be repaired with a leather cleaner.
If you are having to recolour the area as well now is the time to use the leather prep to prep all the area, making this good to carry out any colouring that you will be doing.
At this stage, you need to put in your sub patch if you going to fill a hole.
If you are just repairing scratches, scuffs or cat scratches, lightly the prep this section and start applying the heavy filler to the areas needing repair.
Apply in thin layers, it's best to build up the layers of heavy filler, drying between each layer to ensure for a perfect repair, sanding between each layer also
You can dry the filler with a hairdryer and this can be sanded down with sandpaper anything from 1200 grit to 280 grit foam sanding pad depending on how much filler has been used and how bad the area was that’s being repaired.
Once the filler has dried proceed to colour over this to seal this in place, to avoid coming off.
The leather filler air cures so once you have completed the job replace the lid at once, this product cannot be cured with a heat iron it can only be dried with a hairdryer.
You can purchase this on line by visiting
www.leatherrep...
Any technical help you require we have a dedicated technical department we have set up to help with all your leather care issues, contact a member today.
Email help@leatherrepaircompany.com
Tel 44 (0) 1482 606864
/ leatherrepairco
Instagram / leatherrepaircompany
Twitter / leatherrepairuk
Pinterest www.pinterest....
Tumblr / leatherrepairuk
Website www.leatherrep...
#leatherfiller #leatherrepaircompany
Негізгі бет LRC23 Heavy Filler Leather Repair Compound How To Fill Cracks, Holes and Deep Scratches In Leather
Пікірлер: 10