installing crate motor ls3 525 hp in my 2008 hummer h2,you were a lot of help thanks
@walidh6114
4 жыл бұрын
How is it ? Did you do it ? I'm thinking to swap my H3
@benjaminblackwell1421
4 жыл бұрын
I did a LS3 480 in my H3
@walidh6114
4 жыл бұрын
@@benjaminblackwell1421 How is it ?!
@benjaminblackwell1421
4 жыл бұрын
Walid H it’s great just need to get it retune. The reverse gear is giving me troubles. I put in a 3200 stall as well. But it is a beast and it pulls hard when I get on it. You can see it on my gram @bbrblackwell and I’m on Facebook as well.
@rubenmojarro1
6 жыл бұрын
I pass by that shop all the time and see those jeeps off the frame and always wondered if they get ls swapped, You just confirmed it haha. awsome truck and definitely subscribing!
@sd455pontiac
3 жыл бұрын
At 5min, a 4l80 wouldn't last a week? Yet they're behind 1000 horsepower turbo LS combos. The 4l80 and 4l85 is basically a th400 in overdrive form and the strongest of the GM overdrive transmissions.
@menogusta9829
2 жыл бұрын
I know this is an old comment, but they were referencing a 4l60e vs 6l80e a lot before that point, he probably misspoke.. cause a stock 4l60e generally wouldnt last
@AQWbladefire
Жыл бұрын
Lol I paused the video right after he said that to come to the comments.
@chriskubond6314
5 жыл бұрын
Beautiful!! Awesome truck. Sounds NASTY!!
@kahea5
Жыл бұрын
I just bought a 2011 4.3 Silverado and i seen this video and I'm loving everything about your truck. if i had money i would beg you to build this for me. my truck would fall apart as you pass lol. great job!
@swathdiver489
3 жыл бұрын
K2s had two 12-bolt options, 9.5 (5.3) and 9.76 (6.2) inch. GMT900 Pickups with 6.2 had the 9.5 inch 14-bolt.
@Dr_Xyzt
6 жыл бұрын
That truck is badass.
@thehoule70
2 жыл бұрын
Nice truck
@JeremyMetcalf-w2j
2 ай бұрын
This would be a great swap for a G8.
@keithstr92
4 жыл бұрын
Hell yeah, great job on this!!
@RickyLandry-hd1tw
4 ай бұрын
I would love to do this to my 2013 Chevy Silverado
@TBGaels32
3 жыл бұрын
This video looks like it was shot in North Las Vegas.
@hectormiranda6010
4 жыл бұрын
Nice!! I would like to get the same rear end for my silverado ,those came out on 1995 on some tbi gm trucks ,6 lug 9.5 ring gear. Good job man.
@banga8080
6 жыл бұрын
1st time on your channel I'm subbing now
@khakirock4979
5 жыл бұрын
Got this same engine in my YukonXL. shit is badass!
@Ls3guy
6 жыл бұрын
The 4l80e will hold a lot of power
@swaptimeusa
6 жыл бұрын
Randall Wyatt they can but we prefer the 6 speed autos.
@lacheyenne1000
6 жыл бұрын
Swap Time what needs to be done for the 6l80 swap besides the tranny?
@cbr1thou
6 жыл бұрын
Gee thanks mr obvious
@xalmightyxjayx3647
5 жыл бұрын
Swap Time yall said that the 4l80e wouldn’t handle 525 hp though? Transmission shops have said otherwise.
@biker1007
5 жыл бұрын
*12 bolt rear end count the bolts on the cover shown in the video right after he says 14 bolt
@Mexican928Dunner
3 жыл бұрын
Probably meant to say 10 to 12 bolt conversion
@tarickhood3172
3 жыл бұрын
Bad ass I want that exact set up on my 87 k5 blazer
@MrHALFPITT
3 жыл бұрын
.my favorite channel
@Dr_Xyzt
6 жыл бұрын
I might have to do a 2017 Axle swap then. I have a 10-bolt for now, still with 245/65/17 tires, trying not to break it.
@mikeclay4666
11 ай бұрын
Cool Stuff.😁😁😁😄😄😄😎
@turboflacko946
4 жыл бұрын
Hot damn he held for the full 8 and some
@1987FX16
4 жыл бұрын
Laughs in factory 6.2 6l80 14 bolt 3.73 4WD. It'll out 60 foot and 0-60 5.0 mustangs all day. Pisses them straight off racing red light to red light, ole grandpa trick with stock exhaust and camper shell. lol
@midwestcatz5896
5 жыл бұрын
Sick truck but damn them hats guys .
@GoodguyRaalo
2 жыл бұрын
I want to do this to my 1995 Chevy Cheyenne
@DownHillgamer
2 жыл бұрын
Shitt, I need one of these in my 02 dakota
@neilpatterson8704
10 ай бұрын
id like to do this swap on my 2012 gmc sierra
@gilbertomendoza211
3 жыл бұрын
Awesome 👏🏿
@MrChristianbowman82
4 жыл бұрын
I love the build but it’s wierd how confused these guys are. 4l80 is a badass transmission you meant to say 4l60 and also you put a 12 bolt in not a 14 bolt and meant to say the 10 bolt is what it had in it and that it wouldn’t hold up!
@ja1971chevelle
10 ай бұрын
What a 4l60e to a 6l80e swap in a 2008 Silverado 1500????
@Blando7887
3 жыл бұрын
Daaaaam Miguel
@crop61
2 жыл бұрын
How would that setup work in a 2011 silverado
@Ayeguey
5 жыл бұрын
Badass plan simple
@jakestatefarm3238
Жыл бұрын
That trucks too clean to be missing the caps on the wheels smh
@ryanmcbee3381
5 жыл бұрын
What parts did y’all use for that rear end swap? Is there a guide or video showing that? I’m interested in doing it to my truck
@DOPEGAMETV
2 жыл бұрын
I’ve been searching for someone to swap a corvette engine in my 2000 Tahoe Z71
@patriciamartinez4056
6 жыл бұрын
Subbed! Learned allot in this one video. Are y'all doing an update with 4x4 burnouts soon. Love this truck man!
@patriciamartinez4056
6 жыл бұрын
Would you recommend the 6L80 to pair with a 430hp LS3? or could I stay with my brand new 4L60?
@toddmcmahon2648
5 жыл бұрын
@@patriciamartinez4056 In the video we just watched the lead dude with Velocity say the 4L60 is crap. It's fine and everything for the 290 HP 5.7 Vortec I've got in my '96 Silverado K1500. But, I'm not sold on the fact that it could handle anything above 400HP! You're pushing 430HP and a significant increase in torque. I'd go with the 6L80 and a programmer to fine tune your shift points. Better safe than sorry.
@genemounce8302
5 жыл бұрын
hahahahaha, still has mexican plates on it............. LMFAO !
@erk251
Жыл бұрын
What’s the cost of this?
@GarenteedTires
Жыл бұрын
What sz stall and what gears?
@JoshNorradMusic
2 жыл бұрын
Thinking about 525 cam in my camaro… How does it handle on the street? Lots of surging at low rpm’s? Or is it all good for a semi daily driver in summer months.
@bernyzamora7913
5 жыл бұрын
How can i contact the shop? Or Location of the shop?
@swaptimeusa
5 жыл бұрын
Velocity Customs in Las vegas
@TRB02ss
5 жыл бұрын
4l80 will hold anything you through at them stock let alone built!
@swaptimeusa
5 жыл бұрын
TRB02ss a 6l80e is just as strong and has more gears. It’s up to whatever the customer wants. I like the new transmissions and the ability to tune them to shift however you want. Also you get true tap shift for lighting quick shifting.
@Lokomart
4 жыл бұрын
Swap Time lighting quick ha! That’s a good one.
@kevinadams2766
5 жыл бұрын
I would love too have that set up in my 98 Silverado
@Dr_Xyzt
5 жыл бұрын
I did it to my '98 single cab. It's on my channel. Still using the G80 until the new locker comes in.
@robertoalmendarez243
6 жыл бұрын
Is that by sunrise mountain Las Vegas
@jerez.2133
4 жыл бұрын
Nice I am interested in this swap on my 1990 Chevrolet 1500 I had in mind the 6.2 but I love this set up how can I get in touch with you for pricing
@mikes3209
3 жыл бұрын
Do you have a shop in AZ or a website? I want to swap a 383 stroker in my 98 silverado and was wondering if your shop was available, I'm in the valley. Thank you
@Ben-fk2iz
5 жыл бұрын
wish I had a 6l80. It seems that the 4l60 cant handle a 5.3 at its potential output.
@WilliamStewart1
5 жыл бұрын
A 4L60 can't handle a 4.3's potential lol, weak transmissions. Considering how cheap and easy it is to swap in a 80e I don't know why anyone would stick with a 60.
@DoctorRickSanchez
2 жыл бұрын
_Did u upgrade the torque converter in the 6L80e to a 6L90 one? It would've been worth it while you did the trans swap the 6L80e torque converters are known to go out around 120k._
@rayz4.858
Жыл бұрын
I’m interested in something like this same truck not a Cheyenne tho 4.8
@holeshot1721
6 ай бұрын
Bruhh your cuhh wennt hammer down!!
@bigr3895
4 жыл бұрын
I want to do the same swap in my crew cab Sierra SLE. Still want the 4x4 capabilities and sport car power. Sign me up
@SgtS0apy
4 жыл бұрын
just did it
@toddmcmahon2648
5 жыл бұрын
Hey guys, I've got a 2018 Silverado K1500 (4x4) 5.3 and a cool looking 4-inch lifted 1996 Silverado K1500 5.7 Vortec. The '96 only has 174K miles but since replacing it with the 2018 I've seriously been considering rebuilding the '96 rather than selling it because the '96 is just cool looking to me. And, it's been a good truck. I'm thinking about going with an LS3. I'd love to go with either the 480HP or 525HP engine but with a 5-speed manual. What kind of numbers should I expect to pay on a swap like that?"
@JohnnyRebKy
5 жыл бұрын
Todd Mcmahon with a new manual....12 grand minimum
@matthewrodriguez4142
7 ай бұрын
what about a 5.3 NNBS to 6.0 with 6.2 heads or just 6.0 heads and E85 & Street tune and 4l65 maybe than eventually 4l80
@matthewrodriguez4142
7 ай бұрын
i have same truck and wanna add 6.0 after 5.3 or soon
@rogerestes8097
6 ай бұрын
Do you know if this truck still passes emissions after putting this engine in it?
@mrmidnight32
5 жыл бұрын
Came up with him self? It’s a fucking LS swap, it’s been done by kids who aren’t even born yet lol
@dano4572
Жыл бұрын
HOWS THIS,,,, (#1),1997 OBS GMC K1500 4X4 SHORT BED ,,, OR ,, (#2),1999 OBS CHEVY 2DOOR 4X4 WITH 4" LIFT ON 33"KO2's ,,,,,,, WITH AN E-ROD ( 50 STATE SMOG LEGAL), LT4 WITH A 8L90E SET - UP AS A FULL-TIME 4X4? WHICH ONE SHOULD I DO????????
@greedymoneymusic
6 жыл бұрын
Thinking about going with this crate engine in my c10 1984 . Will this engine bolt up to a mechanical transmission like a th400? What are your thoughts on that ??
@Dr_Xyzt
6 жыл бұрын
Those automatics are great and all, but when you get a T56 Magnum with a lightweight flywheel, it becomes a space ship.
@toddmcmahon2648
5 жыл бұрын
@@Dr_Xyzt amen!
@muntuable
5 жыл бұрын
I think you c10 far better of a swap to see
@northernatomicalatv9262
2 жыл бұрын
have you guys ever installed one of these LS engines in the 2015 silverado models to replace the stock engine from the original 5.3l eco tec engine ?
@samcowell2768
2 жыл бұрын
What transfer case was used and how did the 4X4 launch goi have a 1984 K body I want to put this in and can't find a transfer case that would allow me to make the truck electric????
@MrViper7121
2 жыл бұрын
Did the instrument cluster need to be replaced due to the 6 speed having the PRNDM setup compared the 4 speed PRND321 setup?
@hectorguevara6815
5 жыл бұрын
I’m installing a ls3 out of 2010 Camaro in my 04 Silverado. I’m having a hard time with the wiring did u use the ls3 corvette wiring or did u get a 6.2 Escalade wiring. Or did u build a stand alone wiring. Wat do I need to do to the wiring to get the motor started. Thank bro
@ElGalIo2
5 жыл бұрын
Hector Guevara Planning on doing the same.
@TheGarlandMC
4 жыл бұрын
I just purchased the ls376/480 from gmperformance for my 2011 5.3 silverado. Was wondering if you could send me a link for the wiring harness and if possible the 2017 rear end. And possibly anything else I may need. If it isnt to much trouble. Been looking around and havent seen it done much.
@goodjr8226
3 жыл бұрын
What was the total cost of this install?
@trentdaddydolla647
Жыл бұрын
If you're letting a shop do it maybe close or over 10k lol
@ztwntyn8
3 жыл бұрын
May as well 4wd launch without the customer dude just ragged the shit out of it the doughnut contest lol As for the drag strip you should be in whatever gear is 1:1 so likely 3rd if this is 4spd auto and ideally about 200 rpm past your shift point. Also yeah cheyanne has been on chevys for many years. are you sure you are a car guy??? or maybe you are the camera man for the ch? The engine raised hell that’s for sure. If it does that in a truck it should rip in a 2n gen Trans Am
@stevewilkinson6117
Жыл бұрын
Where you out of? I have a gmc 2014 I want this done to.
@YAHSHUA2285
2 жыл бұрын
How much for something like this truck got done Cost
@raultorresjr2003
4 жыл бұрын
On your axle swap what yoke did you use ?and did it bolt up to the shock brackets or u modified it ? Want to do the same thing
@lauztarizonaboy8205
Жыл бұрын
Is there a part number for the rear end you got from the 2017 & is that from a 1500 or 2500
@torryminers2177
2 жыл бұрын
Alv Si quema cuhh
@troybutler8836
3 жыл бұрын
Will that work on a 2003 Chevy Silverado? If so about how much would it cost?
@BadAssEngineering
6 жыл бұрын
That Mexa is from Sonora all
@josemanuel5749
6 жыл бұрын
It still having the column shifter?
@ericperry4934
3 жыл бұрын
What type of work to the 6l80? Built? What parts? What is redline rpm?
@roseortiz4374
8 ай бұрын
Too bad these new trucks are so ugly
@Millertime96
5 жыл бұрын
Just subscribed, that’s a bad bitch!
@grasshopper7000
5 жыл бұрын
I have a 2009 Chevy Silverado 4.8 how much does the swap cost
@aerooo3466
4 жыл бұрын
grasshopper7000 just throw a single turbo on there you’ll be making about the same horsepower but for less of the cost
@420Panson
5 жыл бұрын
Where are you located at Miguel ......?
@bansheemcqueen
4 жыл бұрын
Las Vegas Nevada velocity customs
@Mr.Beastforpresident
5 жыл бұрын
Where's the shop? What would the Hwy MPG's be with stock LS3, 3:23's and stock 6l80e in a 2014 Silverado ext Cab with 6' bed?
@Mr.Beastforpresident
4 жыл бұрын
Tom Wetz Nice, Who built it? Are you familiar with the 5.3 and 4.3 Ecotec?
@Mr.Beastforpresident
4 жыл бұрын
Tom Wetz Nice 👍! My kinda guy! Ever seen a Fully Mechanical ( Springless ) Dual Rocker arm Valvetrain? Essentially no chance of valve floatation and less cam wear/load
@Mr.Beastforpresident
4 жыл бұрын
Tom Wetz How about a ( Naturally Aspirated ) reverse Turbo Charged engine along with Mechanical Springless Valvetrain? Sounds unbelievable huh?
@Mr.Beastforpresident
4 жыл бұрын
Tom Wetz FWD video to 15:05 and play for 2 minutes then FWD to 20:00 min and watch for 2 minutes. kzitem.info/news/bejne/yJ2Gq4V9bH-AZKg
@georgiaspeedster7800
4 жыл бұрын
How much would be a turn key, out the door price on this?
@ToritoJr71
5 жыл бұрын
Do you sell the harness? I have a 2008 Silverado with a v6 and want to put an v8 in it but just having problems with the harness or how can I get in contact with you?
@in_the_building1
4 жыл бұрын
I don’t play tag bisshh I been it!!
@SIX4TALL
4 жыл бұрын
Could of just got a 2007 ss trailblazer ls7 a lil cheaper comes 390hp
@k.bellingham8335
3 жыл бұрын
Did you get the tap shift working?
@raider81466
2 жыл бұрын
how much torque???
@sleepspace9043
3 жыл бұрын
How much was this build total?.
@jonathanmurillo5172
3 жыл бұрын
Where are you guys located?
@ZachClynes
2 жыл бұрын
Looks like El Paso
@freddymenchaca6133
2 жыл бұрын
What fuel system did u upgrade to??
@cleatussfmo7437
5 жыл бұрын
What would it take to swap an LSA into a 2012 silverado? Will Chevy performance "connect and cruise" package allow for a straight forward install?
@swaptimeusa
5 жыл бұрын
carl moore It should be an very easy swap. I can do the engine harness.
@mannyfresh8484
6 жыл бұрын
@swaptime what’s the difference between corvette 6.2s and escalde 6.2s
@jmanjoshua1516
6 жыл бұрын
The corvette motor has different heads, cam, and everything else. Same displacement size, but much more powaaaa!
@lonniesanchez2732
6 жыл бұрын
No vvt different cam valve reliefs in pistons light weight valves and different intake.
@DTB_RARA
4 жыл бұрын
Lighter valves & valvesprings along with a diff cam
@frankbeans2175
5 жыл бұрын
I just got a half chubb
@morganmcintire2853
5 жыл бұрын
That is a GM 9.5 rear... not a 14 bolt.
@alexaprelude
5 жыл бұрын
Whats the lift and tire set up ?
@602boyz4
4 жыл бұрын
willy cuh
@johnjetton3857
3 жыл бұрын
What kinda mpg’s
@racingbuilttough7364
3 жыл бұрын
What fans do u run
@musclecarsdaily3020
3 жыл бұрын
not a cheyenne
@manuelpalacios9675
Жыл бұрын
Is from Mexico.
@Theinstruments_
4 жыл бұрын
I really want to do this swap. But I need it to pass smog. Does your setup pass smog and what can I do? Thank you
@Theinstruments_
4 жыл бұрын
I was able to get the engine and trans connect and cruise and it passes smog with the right tuner
@timbowalk
5 жыл бұрын
I don't usually troll but honestly I can't see why u didn't just install a 6.2 truck engine with same compression as the ls3 keep the truck accessories a better intake custom cam and have more horsepower with less money involved seeing as how the ls3 and 6.2 is the same engine other than cam and oiling system
@swaptimeusa
5 жыл бұрын
tim walk customer wanted that exact engine so that’s what he got. The truck 6.2 does have a better intake and you are right with your statement.
@mrmidnight32
5 жыл бұрын
6.2 truck motors aren’t that great. My buddy had one and their numbers are terrible for what they should output. They just suck Fuel with little gains.
@timbowalk
5 жыл бұрын
@@mrmidnight32 that's because its tuned to truck duties
@Dr_Xyzt
5 жыл бұрын
The 6.2 truck heads don't have hollow stem valves. Depending on your cam choice and how high you rev, it can be a problem. In terms of oiling system, I have no idea if the LS3 gets a different oil pump from the L92/L96 truck engines.
Пікірлер: 167