You make it look so easy. Thanks for the pointers, too. I'm new to working on my lawn equipment.
@lbjlbj1
3 жыл бұрын
I've done this belt a few years ago, but thanks for refreshing my memory. Need to do it once again.
@dmills7375
Жыл бұрын
My Craftsman LT 2000 won't stop. I understand the problem may be an aftermarket drive belt. Have ordered a new one and will be installing as soon as it arrives., Have saved this excellent step by step video to use as a guide. Thanks!
@Gladiator_Loshe
Жыл бұрын
Still helping 9 years later
@thatblueguy1
2 жыл бұрын
Really appreciate this video... was able to understand the layout and then figured out where my belt jumped a questionable pulley. Back running again, just in time for the Spring cut.
@breenhue
Жыл бұрын
Thanks matey..exactly what I wanted to know..excellent description..thank YOU..🙃☺️
@gregw3925
Жыл бұрын
Thank You so much Matey, Well done !!!!, Oregon Cowboy, Greg
@derpiper25
Жыл бұрын
Great video! This helped me a lot! Thank you for posting.
@marvincavender6215
Жыл бұрын
well done, great detail, even what not to do thank you
@MrJamsum
2 жыл бұрын
Will be trying your method in the morning
@HandyTim
Жыл бұрын
Great explanatory video thank you so much
@rey11able
Жыл бұрын
belt Fits Great - Fair price
@derekmakela5131
3 жыл бұрын
Excellent and informative
@chrisb.1301
6 ай бұрын
Good video thanks.
@kevinhoward1008
4 ай бұрын
Good job big help thank you
@randaljackson6379
10 ай бұрын
Thanks. Very helpful.
@markgray3051
6 ай бұрын
What might be the problem why im going through drive belts on my Ryobi 190 riding mower..if you can throw a couple of possibilities i would appreciate it thank you
@donaldmiller6298
Жыл бұрын
Very well done !
@Larrymichaelg1
3 жыл бұрын
Thanks for your help.
@edwardparker4304
Жыл бұрын
You really make that look simple. Lol
@shaneparker9169
3 жыл бұрын
Hey I have a craftmans LT2000 and while I was mowing I lost drive power pedal just moved without any tension. I found the broken spring that gives you tension. It is about 6 inches long and about 1.5 width. I can't find were underneath it goes. I have lifted up mower and taken off deck but can't figure out were it hooks up too. I need picture of underneath with spring intact. It is the big spring that connects in the middle some where I believe..Can you help? Thanks.
@HandyTim
Жыл бұрын
I have the newer lt2000 from 2006 I believe is it the same drive belt?
@Will-d7o
5 ай бұрын
Thank you ❤
@emrjr1975
Ай бұрын
Do you need to remove the deck belt before you do this
@tannerfehring
3 ай бұрын
Do you NEED TO remove the deck? It looks like everyone does
@TheDirtyBirchTrails
4 ай бұрын
How long is this drive belt? The deck mower belt is 95 inches ?
@kentuckyastronaut
2 жыл бұрын
Really appreciate the video and I know this was uploaded quite some time ago but can you confirm the belt length is 101”? Can’t seem to find that. Thanks again!
@jonasbell1167
Жыл бұрын
I have a poulan pro pp175g42 42 inch mower can not get it to go in reverse had to change the trans lever link any advice appreciated
@maloney0083
5 ай бұрын
What is the size of belt for the drive belt need to order one
@shane3243
3 жыл бұрын
What is going on when you release the clutch put in gear of coarse and it wants to die on ya. It acts like it wanting to go but die and the same time
@djjaviinaction8094
Жыл бұрын
Do you have a video replacing the transmission belt? Please tag me. TIA
@williamhealey3915
Жыл бұрын
Great help
@AltonPowlas
Жыл бұрын
I have a craftsman LT2000 with a Honda engine and the gas tank is below the seat not the battery.
@vapnut
3 жыл бұрын
Thanks, Man!
@Drayzygaming
Жыл бұрын
This would be helpful if my LT2000 didn't look completely different than the one in the video. Must change with newer gens. Back to square one.
@redneckcomputergeek
Жыл бұрын
My bet is you have the rebranded Troy Built Bronco 2.
@hervesalomon1619
Жыл бұрын
My lt2000 mower won’t move the top belt is tight the lower belt is busted what is that belt
@bobinmissouri
3 жыл бұрын
how do you fine the year it was made ?
@giovanigiorgos2955
3 жыл бұрын
Nice video but I have a question my 2014 LT 2000 feels like its skipping and they drive belts looks good. What could be causing this skipping or bucking issue?
@redneckcomputergeek
3 жыл бұрын
Check for a bad idler pulley with failing bearings.
@giovanigiorgos2955
3 жыл бұрын
@@redneckcomputergeek Thank you!
@giovanigiorgos2955
3 жыл бұрын
@@redneckcomputergeekThe idler pully is just for the mower blades correct? I'm having with the transmission slipping (I see I said skipping) where the tractor isn't moving.
@redneckcomputergeek
3 жыл бұрын
@@giovanigiorgos2955 the drive belt will have a clutch and normally at least 1 idler pulley. Those can go bad and cause what your talking about.
@giovanigiorgos2955
3 жыл бұрын
@@redneckcomputergeek Copy.....thanks again for your help I'll check it out!
Пікірлер: 47