I do the heavy lube different. I take out a piece and put the lube where the pieces touch.
@ThatOneCubeCollector
11 ай бұрын
Gotta love the ys3m box.
@Opulent_Vision1
11 ай бұрын
So cool!!
@hihahi1
17 минут бұрын
Helped a lot
@nctverse127
11 ай бұрын
i accidentally ate the lube instead of lubing 😭
@Opulent_Vision1
8 ай бұрын
😂😂
@sabarishprakash2396
4 ай бұрын
💀
@noobified3283
3 ай бұрын
Dead
@robloxEmma_isbackforzane
11 ай бұрын
Thanks this was helpful!
@Opulent_Vision1
11 ай бұрын
Ofc!
@Crowgod_brawlstars
11 ай бұрын
just needed this
@Opulent_Vision1
11 ай бұрын
Ayyyy
@Queenbee-qz6de
11 ай бұрын
WOW I LEARN A LOT FROM YOUR VIDS KEEP UP THE AMAZING VIDEOS !
@Opulent_Vision1
11 ай бұрын
Thank you!!!
@coffeeandchronicles1232
11 ай бұрын
Everybody who will read this comment, understand that don't ask for the giveaway results everytime, opulent will anounce it at the right time but don't ask about it again and again..
@Opulent_Vision1
11 ай бұрын
Thanks man, to clarify, the wrm giveaway ends june 9th, the YS3M giveaway ends June 4th
@coffeeandchronicles1232
11 ай бұрын
@@Opulent_Vision1 I am also a cuber and I understand how irritating the comments come on the video, that's why I clarified the topic
@Opulent_Vision1
11 ай бұрын
appreciate you my G
@coffeeandchronicles1232
11 ай бұрын
@@Opulent_Vision1 pin that comment so everyone can see it.
@hihahi1
17 минут бұрын
Thanks
@Mekavi279
2 ай бұрын
Also FZ Rush and GAN Lube 3 go well together. Maybe add some Mystic.
@Opulent_Vision1
2 ай бұрын
nice!
@TheLegoCuber
11 ай бұрын
This was helpful
@Opulent_Vision1
11 ай бұрын
Good!
@gavs4427
8 ай бұрын
Really cool
@MC_Nxgi
3 ай бұрын
Is angstrom setup plus mystic good ?
@WyattFinds3
11 ай бұрын
I have a question can you write *Wyatt* on the cube 🙏🙏🙏🙏
@JB_Outdoors18
6 ай бұрын
Now my cube is super oily and slippery
@OlliEditsCountries
11 ай бұрын
Thanks!
@Opulent_Vision1
11 ай бұрын
Of course!
@LighterzPo
8 ай бұрын
Bro you use my first rubik cube😀
@Geniuscuber397
11 ай бұрын
now i always use an angstrom setup with dnm
@Opulent_Vision1
11 ай бұрын
Such good ones!
@queennaama6438
6 ай бұрын
I am going to by this❤❤
@Opulent_Vision1
6 ай бұрын
AYYYYYYYYYYYYYYY
@Linlilink
11 ай бұрын
I have a magnet speed cube. My speed Cube is going to go so fast when I do this.
@Opulent_Vision1
8 ай бұрын
Lets gooooo
@Crownable
10 ай бұрын
i have the gan lubes 2&3 does fast and slow work with those?
@Opulent_Vision1
8 ай бұрын
I dont know about gan lubes
@Crownable
6 ай бұрын
I forgot I commented and yes they do work
@VikingTaco1214
8 ай бұрын
Bruh I put DNM-37 into my YS3M Ballcore last week and it’s all sticky now 😭
@Opulent_Vision1
8 ай бұрын
Noooo wym
@advaithvishwanath4243
2 ай бұрын
what to do when the surface becomes slippery after lubing
@Opulent_Vision1
2 ай бұрын
Nice! lol
@Opulent_Vision1
2 ай бұрын
wipe it with a microfiber cloth
@robloxglitch8707
2 ай бұрын
If I’m gonna use gan lube, how would I lube it? My first lube is gonna arrive tomorrow, and I’ve never lubed a cube (I recently got a gan 13 maglev and the pamphlet says if I don’t lube it daily, it can get damaged. Since I dont wanna dagmage a $70 cube, I wanna know how to lube it well using gan lube)
@Opulent_Vision1
2 ай бұрын
Dont lube it daily, do it either every 2 weeks, or every 2 months. since I dont know anything about gan lube, just start with a drop or 2 and see what happens, and add more if you feel it necessicary. What kind of lubes did you get? a speedy one? or a gummy one?
@robloxglitch8707
2 ай бұрын
There are only 3 gan lubes. The No.1 (Mantainence) No.2 (Accel) No.3(Excel) I got all three of them. The first one is supposed to reduce friction in between the pieces. The second one makes it faster, but not uncontrollable. For the third one, I’m not sure what it does. There aren’t many videos on it. Edit: the third one makes the cube more controllable if it’s really loose and uncontrollable, like my MoYu 4x4 it really worked
@robloxglitch8707
2 ай бұрын
My lube arrived! I’m happy with it. I lubed every puzzle I have and broke it in (oviously, I put the type of lube a certain puzzle needed). It even made my worst turning cube way faster! If you wanna try out yourself, it’s not so expensive. (WARNING: DO NOT USE ON STICKEREE CUBES. THE STICKERS WILL PEEL OFF RAPIDLY)
@crazybug9597
18 күн бұрын
dont put the dnmin like that, it will just be anoying to clean up if it makes a mess lol
@Opulent_Vision1
18 күн бұрын
no need to make a mess than lmao
@ev-sb
Ай бұрын
what are some alternative to dnm37? they’re all out of stock where i am
@Opulent_Vision1
Ай бұрын
speedcube shop has a lube bundle for cheap with a lot of really good lubes like dnm37... may be good to look at... if you buy, use code OPULENT for a discount, it helps support me as a creator :)
@nicolaecalin4217
25 күн бұрын
They ran me more than 10$ total (didn't buy them yet) cuz I live in europe... Damn I wish my country had good rubiks cube websites
@Opulent_Vision1
23 күн бұрын
ahhhhhhhhh not ideal... what country??? there is typically a good website per country
@nicolaecalin4217
23 күн бұрын
@@Opulent_Vision1 I'm Romanian, and well, the only "good" website for rubiks cubes has anything but what I'm looking for
@user-vf5ys1uw9j
6 ай бұрын
would u guys suggest Cubical 1 or silk as a third lube? (YS3M set up)
@Opulent_Vision1
6 ай бұрын
Either work, but speedcubeshops lubes last longer, i think martian is the best for that
@lan-man2388
11 ай бұрын
Bro love ur vids, i hope you become popular. And *plzz do a face reveal for 20k subs
@Opulent_Vision1
11 ай бұрын
Thanks man! Maybe lol, my face is in a few older shorts, i just dont have the need to do faced videos like cubehead lmao
@CapybaraMan331
9 ай бұрын
2 drops of both lubes on the bottom or just the fast lube?
@Opulent_Vision1
8 ай бұрын
Just the fast lube. 2 drops each side
@user-ey9qe9nh8c
Күн бұрын
Hi
@arizonasbluegorilla
11 ай бұрын
I’m Big Animation Studios
@Opulent_Vision1
11 ай бұрын
This is news to me
@arizonasbluegorilla
11 ай бұрын
OK
@Opulent_Vision1
11 ай бұрын
ok
@dontflyspirit6535
9 ай бұрын
Most world champions use Angstrom or Max setup...
@Opulent_Vision1
9 ай бұрын
Yes!
@Leo_omg17
11 ай бұрын
please write Leo I love your videos
@_cube_09
11 ай бұрын
I advise cleaning the cube first
@Opulent_Vision1
8 ай бұрын
Lol
@aacubing982
7 ай бұрын
for even slower get wight 5
@bagasfaizaadzdzaky-oz2dm
Ай бұрын
The weight 3 good for spring cube?
@Opulent_Vision1
Ай бұрын
yessir, and if the cube is maglev, I only put it on the inside of the torpedos
@lucass5977
8 ай бұрын
Is using synthetic car oil a good idea?
@WhyAreYouReadingThis-rr4wf
3 ай бұрын
yep i do all the time :)
@Muhammed1298..1
Ай бұрын
Dude how long to wait until lubing again
@Opulent_Vision1
Ай бұрын
probably around 1-3 thousand solves. it stays in there a long time
@nicolaecalin4217
25 күн бұрын
@@Opulent_Vision1THOUSAND?
@AMRcubes
6 ай бұрын
Fr!
@Nothinghahahahahahah
9 ай бұрын
this would be helpful if i had lubes
@Opulent_Vision1
8 ай бұрын
😂😂😂
@TheGreatSupraKid
4 ай бұрын
I have tge dnm 37 and I want to apply it on my Gan 14 Galaxy
@Opulent_Vision1
4 ай бұрын
thats so awesome! go for it
@Unknownlecool
4 ай бұрын
so now we speedlubing huh?
@Opulent_Vision1
4 ай бұрын
thats the goal
@ProperCubing
9 ай бұрын
For my speed cube shop people you can use galaxy and lunar
@Opulent_Vision1
8 ай бұрын
Those are both really good
@IceLemonTeaGaming
11 ай бұрын
Hi can write my name on the cube? (IceLemonTea)
@CreeperCubing
7 ай бұрын
What is tye ys3m like
@MircoSketches
8 ай бұрын
Why fast and slow at the same time 😅
@Opulent_Vision1
8 ай бұрын
Slow is for the core and stability, and fast is to decrease piece friction on the outside, together it makes a well rounded cube, you can either use 2 fast lubes or 2 slows depending on preference
@ikeamonke123
3 ай бұрын
Can it be weight 5?
@Opulent_Vision1
3 ай бұрын
yes! all personal preference
@ColterAndTate
11 ай бұрын
Can you give me a shout out
@Opulent_Vision1
11 ай бұрын
I get too many requests that i do not do shoutouts, sorry I hope you understand
@ColterAndTate
11 ай бұрын
@@Opulent_Vision1 Ok
@intercommentator20
7 ай бұрын
My PR for this is 10 sec beat that
@Opulent_Vision1
7 ай бұрын
ayyyyyyyyy
@nicolaecalin4217
3 ай бұрын
Why slow tho? I want it faster
@Opulent_Vision1
3 ай бұрын
its for core stability, we put the quick lube on the exterior pieces to speed up turning
@MGLcuber
3 ай бұрын
Its not that easy thought. what about the tracks and the core (if it has springs)
@Opulent_Vision1
3 ай бұрын
this is just the 30 second version lol, you are totally right!
@MGLcuber
3 ай бұрын
@@Opulent_Vision1 what is your go to setup mine is angstrom dignitas angstrom gravitas dnm 37 and depending on the cube I might add some fox calm
@RoyceDillingham
6 ай бұрын
is speedy a good option
@Opulent_Vision1
6 ай бұрын
its alright, but ive been using SpeedCubeShop lubes, because better price, and longer lasting..... I used to use speedy, but it took so much to make the cube good.... if you do go to scs, use code OPULENT for a discount G
@RoyceDillingham
6 ай бұрын
@@Opulent_Vision1SIUU
@RoyceDillingham
6 ай бұрын
@@Opulent_Vision1also for slow can I use gan 1
@gamingboii9230
10 ай бұрын
How ro lubricate the GO Cube
@Opulent_Vision1
8 ай бұрын
Im not sure if you can? Since its eletric?? No clue though
@gamingboii9230
8 ай бұрын
@@Opulent_Vision1lol😂
@coffeeandchronicles1232
11 ай бұрын
I am guessing something, YS3M is your favourite cube. RIGHT!!
@Opulent_Vision1
11 ай бұрын
Nah nah man, i still main with my congs design meying
@coffeeandchronicles1232
11 ай бұрын
@@Opulent_Vision1 what!? Tell me everything in simple words
@Opulent_Vision1
11 ай бұрын
Cong's design was the brand that used to make cubes, they made one called the meying, and it was the best cube ever, but sadly they stopped making cubes like 6 years ago... There are still reviews of it on youtube though!!
@coffeeandchronicles1232
11 ай бұрын
@@Opulent_Vision1 oooh, and I use a cube which pops out every time you do a corner cut in it and that's why I am participating in the cube giveaway
@Opulent_Vision1
11 ай бұрын
LETS GOOOOOOO
@Kataru210
6 ай бұрын
Why do you need one fast and one slow
@Opulent_Vision1
6 ай бұрын
fast is to gum up the core to stop it from popping, fast is for the pieces on the outside to speed up the pieces and decrease friction. its all an engineering equation of leverage on the piece, however some cubers do this, or use 2 slow lubes
@Kataru210
6 ай бұрын
@@Opulent_Vision1 what’s gumming the core
@Crowgod_brawlstars
11 ай бұрын
what happened to the giveaway
@Opulent_Vision1
11 ай бұрын
What you mean?
@coffeeandchronicles1232
11 ай бұрын
The giveaway Results are coming soon so don't take tension, Clown_stars.
@Crowgod_brawlstars
11 ай бұрын
@@coffeeandchronicles1232 actually i misunderstood 9th with 29th so umm... 👍 Yeah
@Opulent_Vision1
11 ай бұрын
Ayyyyyy
@Everydaycuber
11 ай бұрын
Yoooo
@Opulent_Vision1
11 ай бұрын
Welcome back Wise Knight
@MShazarul
5 ай бұрын
Except I bought the whole lots of other lube, good thing this hobby isn’t as expensive as my pc.
Пікірлер: 136