I wish more people clearly explained what they did with part numbers this way. Very nice!
@kidmoto22
4 жыл бұрын
Thanks...honestly it was a bit of an afterthought. I didn’t do a walk around vid when I did my first impression.
@junixsk8
4 жыл бұрын
That looks so clean! She's gorgeous 😍
@kidmoto22
4 жыл бұрын
Thanks Dias much appreciated!
@macdaddy.cycles2289
3 жыл бұрын
been thinking about getting a RKS really like the look and just over all size really like what you have done with yours !!! T bars are a must for any bike now !
@kidmoto22
3 жыл бұрын
They are so much more comfortable than the stock bars...total game changer.
@RickIguana
3 жыл бұрын
Great videos! I've installed flush mount gas caps and changed my tank badges with your help! Where did you get those black windshield nuts/ bolts on the forks?
@kidmoto22
3 жыл бұрын
That’s great to hear man. Those are part of the hardware set with the Memphis shades road warrior.
@withPercy
4 жыл бұрын
Dude!!! Did you go all the way home from your trip just to do this vid?!! You, sir... are a true rock star!
@kidmoto22
4 жыл бұрын
Being Here Now, with Percy Not a chance! This was done and set to launch before I left!
@BryTheBiker
4 жыл бұрын
Great video. What mic are you using love the voice over!
@kidmoto22
4 жыл бұрын
Bry The Biker I used my Podcast mic for the voice over. It’s the Blue Yeti mic...in the red color..🤣
@BryTheBiker
4 жыл бұрын
kidmoto22 well that is all kinds of silly lol. That is what I was thinking of getting so now I know how it sounds. Hope you guys had a great trip.
@kidmoto22
4 жыл бұрын
Dude we are still on the road! It would seem that our trip back is going to be some type of adventure with rain predicted for here where we are and above 90° at home...gonna be interesting!
@rubenperez9231
Жыл бұрын
I have a 2018 road king. Where did you put the ground cable that was on the handle bar?
@kidmoto22
Жыл бұрын
There’s another hex bolt near where the bars attach to the triple tree and I put it there. Works just fine
@TonysGarage
4 жыл бұрын
How tall are the bars? 🤣😂🤣 nicely done Ryan!!!
@kidmoto22
4 жыл бұрын
Your killing me Tony!...🤣🤣
@budd7759
3 жыл бұрын
I really like your video on these bars. I originally was going to get ape hangers but have come to the conclusion that they are all to wide. I'm 5'9" and have a hard time getting any where near full lock when riding slow. I have a 2020 RKS with the stock 36" bars. Are the lucky 13 bars a lot better for slow speed maneuvering than the stock bars? You used the H-D part 55800290 to run the bars through. Does it cover all the wiring and still let you use the fork lock? What have you done with center hole? I have watched another video where the person ran the brake and clutch hoses through the center hole and added a USB coming out of one of the side holes where the brake and clutch hoses originally go through. He had the 15" bars so I guess he had to use longer hoses because it doesn't make sense to disconnect the brake and clutch to run them through the center. If you had to do it over again would you still get the lucky 13 bars?
@kidmoto22
3 жыл бұрын
Let’s see if I can answer your questions. Yes they are easier for slow maneuvers because they are much narrower. Yes I used the stock HD part and snapped the cover on that’s in the center. I ran the wires through the side not the center hole. This way I didn’t have to bleed the break or clutch. You can go to the 15” bars with the stock cables it’s just very tight the 13” bars give your more play. I love these bars and ran them for about 6k last season they are great. The best part is how they change your wrist position to something more straight forward.I would without a doubt get these again.
@budd7759
3 жыл бұрын
@@kidmoto22 The 1.5" of pullback also helps with the slow speed maneuvering getting the bars a little closer to the rider. I'd imagine you could have gone with the straight riser bars being 6'3" but I definitely will need that 1.5" of pullback. Did you look at any other brands of t-bars before going with the lucky 13's? The dealership where I got the bike carries Kraus bars and risers. they look really nice and have a lot of options for risers, pull back plates and bars but they are ridiculously expensive. The 8" pullback risers are $513 USD alone.
@kidmoto22
3 жыл бұрын
@@budd7759 I went with these because of the internal wiring option for the clean look. Many of the riser bar options do have quite as clean setup. The riser and bar options are much more expensive. I like the 1.5 pull back cause I like to put on miles and this slows for more relaxed arm position.
@budd7759
3 жыл бұрын
@@kidmoto22 The riser cover and the polyurethane bushings were the only additional items needed besides the bars?
@kidmoto22
3 жыл бұрын
@@budd7759 Your gonna want some loctite and if your running stock grips those will not be able to be reinstalled.
@digitalmotorhead5323
4 жыл бұрын
Congrats on the new bars. I hope they work out in the long term.
@kidmoto22
4 жыл бұрын
They feel great really enjoy them!
@BillyandSamRide
4 ай бұрын
Did you have to get the riser cover part #55800290 powder coated as I see it only comes in chrome.
@kidmoto22
4 ай бұрын
When I purchased mine they had it in black. So no I didn’t have to get it powder coated.
@Rayrice412
3 жыл бұрын
Nice bike love the bars I’ve been looking now I think I’ve made up my mind now since I seen yours . I have a 2018 sport glide
@kidmoto22
3 жыл бұрын
Lucky 13 bars would look great on your Sport Glide without a doubt. Love that bike!
@twistedbiker6909
Жыл бұрын
So you didn’t need a wire extension harness for the wiring?
@kidmoto22
Жыл бұрын
I didn’t….I know someone who also did the same job with 15” bars…the wires were really tight
@macdaddy.cycles2289
3 жыл бұрын
did you get the standard lucky 13 or the heavy hitters ?
@kidmoto22
3 жыл бұрын
They are the standard. The heavy hitters do not have the pull back and I wanted to make sure that there was some pull back to keep me more upright.
@brainscanner
Жыл бұрын
Work those Bars with the vented windshield?
@kidmoto22
Жыл бұрын
I’ve always used the Memphis shades road warrior faring with it so I don’t know if it would work or not.
@georgehakeem
4 жыл бұрын
How tall are you I'm having trouble deciding between the 11 or 13 inch I just purchased a 2013 road king
@kidmoto22
4 жыл бұрын
George Hakeem I’m 6’3” and I got the 13” bars. I could have easily gone with the 15”. If your over 6’ and have longer arms you might want the taller bars.
@georgehakeem
4 жыл бұрын
@@kidmoto22 I'm 5'9 I got short arms so probably I'll get the 11 inch
@justinhcannon
4 жыл бұрын
Whatcha gonna do with the hole in the cover? Haven't made up my mind yet for mine.
@kidmoto22
4 жыл бұрын
I’ve not figured that out yet! If you find a clean solution let me know.
@macdaddy.cycles2289
3 жыл бұрын
did you have to change the length of any cables or break lines ?
@kidmoto22
3 жыл бұрын
Not with this size of bars on a RKS. I believe you can go up to the 15” bars and still be good with our changing break and clutch lines
@altahre
Жыл бұрын
from where i can get same this bar i feel is comfortable
@kidmoto22
Жыл бұрын
Lucky Dave’s is who sell these bars
@DCyclemoto
4 жыл бұрын
All harley part numbers should be 360FKN 🤣😂. Like the bars, Ryan. May have to get some risers soon for riding comfort.
@kidmoto22
4 жыл бұрын
Thanks D and I agree that would be an appropriate use of a part numbering system..🤣🤣
@macdaddy.cycles2289
4 жыл бұрын
NICE !!! I just put Lucky Dave's 14' San Diego bars on my bike !
@kidmoto22
4 жыл бұрын
I bet you love them!
@macdaddy.cycles2289
4 жыл бұрын
@@kidmoto22 I haven't ridden it yet I just finished re pinning all the connectors it looks so much easier on you tube than it actually is .
@kidmoto22
4 жыл бұрын
For sure...I’m actually having some issues with my left hand control and I have parts on order and H-D is gonna have to fix it...live and learn.
@macdaddy.cycles2289
4 жыл бұрын
@@kidmoto22 I can't stand dealing with HD I always do all my own work ,or I'll use a local shop if I get in over my head . Drag carries every HD part and charge less for them.
@kidmoto22
4 жыл бұрын
I used a local shop to pull the cables for me thought I’d save some time and they broke the throttle connector and didn’t say a word about it when they gave them back to me. I’m not totally sold on the shop quite yet.
Пікірлер: 66