Cool Brother. Would like to see more when you dig em out in to the light of day. A trip through time, classic Luka Cee. Thank you Luka.👍👍👍.
@EdsAttentionToDetail
3 жыл бұрын
I love the way that stands, would be so cool to see it finished.
@charlespalavros6952
3 жыл бұрын
That’s really cool hope u get to finish it ... Thanks for sharing ... Love FB group
@JackFlemingFan1
3 жыл бұрын
Excellent video! I really enjoy watching all of your videos as I learn a lot watching them!
@neiljumpinjackflash7551
3 жыл бұрын
The front tire off the ground, is like one of those unfortunate 'accidents' that could wind up adding to the 'effect' of a Super Stock launch, as long as the wheel off the ground is the correct one for the torque of the engine. Anyway, a Tree and abit of lift over all on the car would sure make a neat diorama. I have a ton of 'incompletes' that I try to go back and inch another step to completion. Great build Luka, keep on a chooglin till you get er done.
@scooterdoughmas3012
3 жыл бұрын
I kinda like that part about the front wheel 😀😘🐶🏡💝🎅
@TheMuscleCarModeler
3 жыл бұрын
Looks great! I have a few parts kits of that Duster. I keep using the engines and chassis for other Mopars. I might have what you are missing. Just come on by and hang out and check.
@TheLukaCeeChannel
3 жыл бұрын
Thanks. I know I have the engine. But for some reason. The bumpers are missing.
@TheMuscleCarModeler
3 жыл бұрын
I sure I have windows and chrome.
@RestorationAustralia
3 жыл бұрын
Great looking kit.
@modelcarjedi
3 жыл бұрын
That chassis looks great !
@davez3838
Жыл бұрын
I love it! Remember the Pro stocks & Super stocks from the 60&70s nice work you need to finish it good luck .
@mhollman8650
Жыл бұрын
Wow !! So the HPC decal has Massive meaning to me. That’s was my dads company!!!
@TheLukaCeeChannel
Жыл бұрын
That's pretty cool. IIRC. It came from the Warren Johnson Pro Stock Firebird kit.
@mhollman8650
Жыл бұрын
@@TheLukaCeeChannel Most likely it did He’s sold it to a nanotech company a few years ago. I grew up in the industry thanks to him.
@plymouthdie-castreplicas
3 жыл бұрын
I love Mopar Drag cars! Awesome video!
@THROTTLEPOWER
3 жыл бұрын
Super cool..........That's one Mopar that deserves to be finished!!!!! 👍 👍 👍 👍
@markglasco2727
2 жыл бұрын
🗣️📢 LUKA!!! YOU ARE SO FRICKEN TALENTED...🏆 Please finish your awesome builds. Nobody has a perfect build...🤔
@erics3424
3 жыл бұрын
It is a race car!!! The paint is racecar perfect!!
@MODELMIND72
3 жыл бұрын
Wow! This whole vid just reminds me of how many unfinished models I have stored up in the vault. I often ponder if I will ever get to finish them? My mind never runs out of concepts to do, yet father time is always escaping me. I am thankful for the ones that have made the channel. Life can be like a big box of unfinished models.
@adamfritz84
3 жыл бұрын
I agree. I have totes and boxes full of finished, partly finished and never touched models. I get ideas then I get overwhelmed and move onto other projects
@theamishsoylentretailersofohio
Жыл бұрын
Better yet whom in your midst is going care enough to be worthy of your prized possessions enough to build and appreciate them when you are gone . Thats my dilemma but my collection is mostly old model magazines .
@vans1107
3 жыл бұрын
matt and dana conte! wow that's a blast from the past..I remember he had that website called "lookout model car parts" ordered a bunch of parts by mail back in the late 90s early 2000s. Is that you?
@billyjohnston4244
3 жыл бұрын
So finish it already !
@erics3424
3 жыл бұрын
Finish It!!!!!!!!!!!!!!!!!!!!
@RJDCR
3 жыл бұрын
kool RJ
@MetalMania3DTV-TAS-AUS
3 жыл бұрын
Oh man you gotta finish it, the cars screaming for it, nice so far, looks tuff already, thankyou for sharing cheers KC Tasmania Australia 🇦🇺👍😎👊🇦🇺
@THROTTLEPOWER
3 жыл бұрын
Yep!
@Fire240JS
3 жыл бұрын
Awesome Fab work! Looks like it all just molds together.
@musclecarmitch908
3 жыл бұрын
Beautiful model, I'd like to see it finished!
@ChuckSSoul
3 жыл бұрын
Dat car so fast its lifting the front left wheel off the ground even without an engine, haaa. But yea i do love them rims... Ya know back in the day i was running around in a 440 duster and after 2 years the floor pan around where your driveshaft hoop support is had a 16 inch rip/tear cross wise of the car. Looks like you built a nice ride there and should finish it off...
@georgebain986
3 жыл бұрын
I heard you say that they don't make metalizer paints anymore. I found a set of paints for fantasy figures by rustoleum which are lacquer paints. Were the metalizer paints you spoke of lacquer paints as well?
@TheLukaCeeChannel
3 жыл бұрын
Rustoleum bought Testors. So that's probably the same paint. Good info.
@scooterdoughmas3012
3 жыл бұрын
wow very nice i kanowe all about small imperfections just gets under yo skin so ta speak luvin those slicks the detail and fab workx is the signature of a pro at its best i have raided three or four kits just to make one those are the gooder mods and thats the stuff dreams are made of build it and they will come lub cha scooter d
@vacustoms
3 жыл бұрын
Awesome build. Love the engineering that went into the chassis. That's where the fun is. There's pride in that workmanship...
@theamishsoylentretailersofohio
Жыл бұрын
Rebuilds or parts box models . Even better models someone is throwing out are the best because the sky is the limit . Because you can take bigger chances with your model and not be concerned with failures . Or the loss of a kit at today's cost .
@bubbapipe
3 жыл бұрын
Yes yes!! Drag cars...love it
@larrydelong9771
3 жыл бұрын
Tidbit for you....Poppy Red is the color AJ Foyt used on his Coyote Indy cars!
@garyparker2969
3 жыл бұрын
PLLLEEAASSE Finish That Beautiful So Far Creation Luka Cee, God Bless.
@BarnacleBrando
3 жыл бұрын
Speaking of Ford Poppy Red....that’s the color Dale Earnhardt used on his Goodwrench era NASCAR chassis. I always thought it was Chevy Engine Red/Orange but an RCR employee confirmed it was indeed Poppy Red.
@larrydelong9771
3 жыл бұрын
AJ Foyt Coyote Indy Cars too!
@ronstewart9792
3 жыл бұрын
You have to finish that build, It would be so cool. Ron
@aaronbaldea2734
3 жыл бұрын
Wait...Great Northern Dodge sponsored a PLYMOUTH Duster? 😂 Seriously, a cool build. 👍🏼
@TheLukaCeeChannel
3 жыл бұрын
HEY! At least it's not a CHEVY!!
@christophercook3840
3 жыл бұрын
Awesome car! There needs to be more Mopar models in my opinion.
@MichaelAnderson-nh4gu
3 жыл бұрын
Great chassis work, I find myself in the same boat . I love building chassis’s and cages , but I tend to fall off on the body paint. Maybe I need to farm out the body work or trade chassis work for body paint.
@michaelcooke2559
3 жыл бұрын
You need to restore/finish this one. Nice video with showing us the chassis work you’ve done.
@mikedupell7121
3 жыл бұрын
I have my 65 chevelle prostreet project that has been sitting for over 20 years maybe someday it will get done
@bigdave0311
3 жыл бұрын
Show us how to do it
@James-sir
3 жыл бұрын
I have missing windshield on a forgotten revel 60’s mustang I don’t want to buy a whole model to finish it oh it’s the Shelby mustang
@moparnut6286
3 жыл бұрын
Man I love this thing how can you not want to finish it! Yeah it's hooking hard lifting the tire lol 😆 you could have added torque boxes too!
@mikeymopar1171
3 жыл бұрын
Mopar or no-car baby
@insomniahobbies
3 жыл бұрын
You said "abandoned" the same way my dear mum does whenever she talks about my dad.
Пікірлер: 54