do you have a video of you putting the screw eyes into your swim baits. I know that you have said that you recess them a bit and that makes since but, will not be able to close my eyelets if mine are any further in. And what type of pliers are you using to close them?
@SolarfallBaits
7 жыл бұрын
no i dont thing i have ever shown that in a video. I'm just using normal pliers to open the loops enough that they slip inside each others.
@milentodorov8110
7 жыл бұрын
Have you ever tried to use spray paint, and how good of results can you get?
@Vic_outdoors
Жыл бұрын
Not very god
@tristanwood2512
3 жыл бұрын
Please tell.me you sell these im very interested
@alanscustomlures9922
7 жыл бұрын
great video man seriously. question, now this is a resin bait correct? now do you just send the pin through once it's all painted up? and do you use screw eyes? thanks
@SolarfallBaits
7 жыл бұрын
Mostly is use a screw eye to screw eye connection.
@alanscustomlures9922
7 жыл бұрын
I see, and get in there with some needle nose to Crimp. Cool work man. I used a stainless pin but it's alot of work
@collinsanders4727
6 жыл бұрын
where do you get or how do you make your tails
@SolarfallBaits
6 жыл бұрын
check out the latest video
@dirty_863
7 жыл бұрын
Where can i buy one of these?
@SolarfallBaits
7 жыл бұрын
I auction them off randomly once in a while in ebay and other places.
@Bassafornia
4 жыл бұрын
How do you prep youre baits for painting to prevent peeling? Thanks
@SolarfallBaits
4 жыл бұрын
I use paint primer spray on the resin baits to achieve good adhesion with the airbrush paints i use, the brand of primer does not seem to matter too much, so any will do
@Bassafornia
4 жыл бұрын
@@SolarfallBaits is that rattle can primer?
@SolarfallBaits
4 жыл бұрын
@@Bassafornia yes thats what i use
@user-fn9yv7fp4u
7 жыл бұрын
what colors you use
@SolarfallBaits
7 жыл бұрын
crazyjohn GR i use cab coatings paints on all of my lures
@_foR.Mula._
7 жыл бұрын
hi . how do you connect the two parts . can't see video ((
@SolarfallBaits
7 жыл бұрын
its a screw eye to screw eye connection
@_foR.Mula._
7 жыл бұрын
never seen a screw with screw connects
@SolarfallBaits
7 жыл бұрын
its very popular connection to use in swimbaits so im sure you have but maybe have not realized it cos that part is usually not visible in pictures you can find online
@craigwatt3461
6 жыл бұрын
Great video ,Another masterclass. just curious did you make the tail fin and what is the best way to attach them to the body ?
@SolarfallBaits
6 жыл бұрын
personally i just have it go into slot thats filled with epoxy, havent had one come off so far. knocking on wood :D
@ewaldoasm
7 жыл бұрын
SHOW !
@tonesrod6446
6 жыл бұрын
Did you add a clear coat on that
@SolarfallBaits
6 жыл бұрын
of course, i usually put 2-3 coats of epoxy
@tonesrod6446
6 жыл бұрын
SolarBaits do you sell these
@SolarfallBaits
6 жыл бұрын
i did before but havent made one in ages due to lack of interest
@handyallaround5776
6 жыл бұрын
do u sell this and if so what is your website and how much for this one?
@SolarfallBaits
6 жыл бұрын
i have sold some of these on ebay once in a while in auctions
Пікірлер: 38