.... aaaand another pile of cool terrain to fill the basement! Keep up printing and gaming!
@michaels8940
2 жыл бұрын
Thanks for this video. I don't know anything about Nemesis but I will check it out however I do play many other games and will be playing 5 parsecs. I went ahead and bought in to this set. Can't wait to try it out.
@randyjones5429
2 жыл бұрын
Oh man! Watching your videos can get expensive! :) I'd been wanting to build a 3d nemesis board and using these pre made rooms will definitely save a bunch of time. Thanks for the video!
@randyjones5429
2 жыл бұрын
Oh! Also Next Level Gaming has a printable time and self destruct track if you want to get those 3d printed instead of just a paper print.
@AmongRevenants
Жыл бұрын
I like that there's no connectors between tiles... quicker to place. And if the tables going to sit between multiple game sessions a little museum wax will hold each tile in place.
@marcuswelbymd7881
2 жыл бұрын
Informative review and enjoyable painting guide. Thank you.
@AgentFlea
Жыл бұрын
I love how many resources your website has. Overall super helpful video! Thanks!
@CannibalSmiley
2 жыл бұрын
I've been getting good results using latex house paint, with matte sealant to keep the gloss down if I'm forced to use the satin or gloss house paint. (I used to be able to get matte, but then Home Depot stopped carrying that in the sample sizes.)
@icefallen
2 жыл бұрын
Wow thats a great idea! I love LV427!
@palmcrazysg
2 жыл бұрын
speechless..... WHOA! 3D nemesis!
@techadeptcrafts
2 жыл бұрын
Fantastic board. Love it
@CaptainBipto
2 жыл бұрын
Very informative video, I really enjoy your content. It would be great to use with Papsikels Alien vs Humans and Exterminator vs Skull Hunter minis.
@thetraitorguardsmen.5321
2 жыл бұрын
That would be great for space crusade or space hulk. 💯😊👌
@sappet102
Жыл бұрын
This would be awesome for fixed map custom missions on Derelict Ship for Shadows of Brimstone
@MrKazyFreak
2 жыл бұрын
Looks amazing!
@pixyfrog
2 жыл бұрын
hum... I have used the DragonRest HVAC set for Nemesis but this system could be great for the upcoming Lockdown version... Thanks for the idea
@WendyDaCanuck
2 жыл бұрын
Is there a way to put the numbers on the doors themselves? I think that would look better and save on tabletop clutter. Your setup looks amazing as always!
@gaminggeek241
2 жыл бұрын
Yes, you can definitely place the numbers on the doors or on the panels next to the doors using a simple program like MS 3D Builder. But that means you have to set up specific pieces when you build out the ship. I wanted to remain flexible and be able to use for upcoming Lockdown.
@pokemonmandag2108
2 жыл бұрын
could you do a review on the new DRQ HeroQuest board set that he just put out alot of new walls for. I would so like to check out how that gous together and what options there are
@gaminggeek241
2 жыл бұрын
Yeah, I just saw the new walls--so excited to print those out! I have some other projects going right now but intend on doing a video once I print out enough walls.
@UtubeEric12345
2 ай бұрын
Not sure if you read old comments. But on the off chance that you do I still have to ask, did you do any major play on this terrain? Because it looks awesome and it would be super interesting to hear if it was also enjoyable to play on :)
@gaminggeek241
2 ай бұрын
Yes, absolutely! It makes an incredibly thematic game (Nemesis) that much more immersive to have a 3D board.
@nickdubeau8541
11 ай бұрын
I can’t find your five parsecs from home videos :)
@argon657
Жыл бұрын
Another question related to glueing: when you print out all the different pieces for the navigation room or the cryo-chamber, do you then glue them together to form one, solid unit? Or do you just keep them separate and assemble them whenever you set up the terrain?
@gaminggeek241
Жыл бұрын
I kept them separate just for ease of storage but if you have the room, you can glue together.
@gordonpolston4555
2 жыл бұрын
You should checkout Xeno Dead Zone, these tiles would be perfect.
@Mangaka_Ody
Жыл бұрын
How much does a single corridor tile weigh? I'm asking because I want to know how much resin I should buy.
@palmcrazysg
2 жыл бұрын
Just to confirm, if I just get the Standard Corridor set, we can still build the Nemesis board... just that it may not be thematic.... with the featured rooms like Cryo-sleep Chamber, etc. correct? Thank you so much! :)
@steffdia7080
Жыл бұрын
This 3D print diorama don't fit to Nemesis board game. No straight corridors and no hexagonal. But Hero Quest 3D print fits to original Hero Quest. Are there any 3D print that fits to original board game?
@argon657
Жыл бұрын
Did you use orange spray paint on the doors? Or just the same Orange that you used on the cables in the rooms?
@gaminggeek241
Жыл бұрын
Yes, I first spray painted with white and then orange over that since straight orange doesn't work well with black pla.
@argon657
Жыл бұрын
@@gaminggeek241 interesting. Do you recall what color/brand of orange paint you used?
I’ve got a question about the doors: do you have to print two door pieces and then glue them back-to-back? Or does it print out as one solid piece?
@gaminggeek241
Жыл бұрын
Yes, they are two different pieces glued back-to-back.
@lastthings
Жыл бұрын
@@gaminggeek241 what's the best kind of glue to use on the doors?
@gaminggeek241
Жыл бұрын
@@lastthings I use either super glue when there is a flat surface or use E6000. You can buy both of these at Walmart fairly inexpensively.
@palmcrazysg
2 жыл бұрын
also, where is the armory room? Could not find it on the website.
@mme583
2 жыл бұрын
look under small rooms weapon room
@AllenGreyMusic
2 жыл бұрын
Do the doors come with the Nemesis Inspired pack? And how many do I need of each? ex. Large Navigation Room (X1), Medium Cryo-Chamber (X1), Small Engine Room (X1) , Starter Corridor Set (?) . Also what is the room 2 on the map layout: B1 (Large Navigation Room) C1-4 (Medium Cryo-Chamber) E-1-3 (Small Engine Room) 1 (Starter Corridor Set) 2 (????)
@gaminggeek241
2 жыл бұрын
Yes, doors come with the corridor starter. Your list is correct in terms of purchasing the STL files--the numbers 1 and 2 on the map are for the placement of Nemesis tiles, not a print list. If you look on their Facebook page, they have a print list of how many corridors you need to print out.
@dancooper4130
2 жыл бұрын
I might be late to the party but what 3d printer would you recommend for this project, I have no previous experience nor knowledge of one
@gaminggeek241
2 жыл бұрын
Short answer: Get the Anycubic Vyper for $360. Long answer, really depends on how much you are willing to spend in order to be able to print out of the box vs. needing to fiddle around to optimize your printer. Tons of review videos out there but definitely auto bed leveling is worth it.
@kaijuh
Жыл бұрын
while this looks cool, tbh I would prefer a regular playmat. it just looks kind of messy. I like the other 3d terrain I saw someone do on BGG
@PulsefiredGaming
2 жыл бұрын
I want to know if there is a reasonable way to buy all their sets at once, their website doesnt have a collections section that i can see. buying each room piecemeal seems shortsighted
@mme583
2 жыл бұрын
All the collections are divided up into sections, when you spend $100 or more you get 25% off your entire order by entering "BUNDLE" at checkout
@BrucePatnaude
2 жыл бұрын
Helpful video. What size did you print these at? 32m or 28mm?
@gaminggeek241
2 жыл бұрын
I printed at whatever size they come in--didn't resize so I think that is 28mm.
@palmcrazysg
2 жыл бұрын
Is this too cramped? as in when the aliens and characters are in the same room?
@gaminggeek241
2 жыл бұрын
I don't think it is too cramped--there is actually more space than the original hex tiles.
Пікірлер: 53