Today we are looking at another new function of Lychee 5, and that is the suction cup detector, which you can use to see how your drain holes will handle the print process and if you need to you can make adjustments and see what changes it will help with.
Model credit:
Digital Dark Pin-ups
/ digital_dark_pinups
printmymini.com/
So the Angle equation is this.
0.50 represents the layer height you are printing.
0.35 represents the printer's max resolution, in this case 35 microns.
Put this into Google:
arctan (0.50 / 0.35) in degrees
You get this 55.0079798 degrees or 55, so when doing the angle for bases, and flat objects remember the angle degree and use that to angle the objects.
Here it is with the numbers zeroed for you, just add the resolution of your printer and the layer height you are printing at.
arctan (0.00 / 0.00) in degrees
Check us out on Instagram too:
/ printmy3dmini
Just give us a follow on instagram, and be sure to share this with your friends!
My Lychee Slicer support settings for minis.
Super Light and Light supports
1.15 - 1.22 bar diameter
0.22 - 0.15 tip diameter
3.10 - 3.57 tip length (sometimes longer, depends on the area or need)
raft - line/support triangle, or shape
bottom thickness on supports .29, raft is .50
Mediums
1.33 - 1.44 bar diameter
0.33 - 0.44 tip diameter
3.00 - 3.57 tip length (sometimes longer, depends on the area or need)
raft - line/support triangle, or shape
bottom thickness on supports .50, raft is .50
I rarely use heavy supports, but these are my settings for HEAVY
Heavy
1.55 - 1.75 bar diameter
0.55 - 0.75 tip diameter
4.00 - 5.35 tip length (sometimes longer, depends on the area or need)
raft - line/support triangle, or shape
bottom thickness on supports .50, raft is .50
Happy printing!
/ @iprint3dminis
/ printmy3dmini
www.etsy.com/s...
printmymini.store
printmymini.com/
Music Credit:
Somewhere In The Mountains
Oleksii Abramovych
Content found during: 1:59 - 3:43
Негізгі бет Lychee Slicer 5 New and Beta Features Updates - Suction Cup Detection
Пікірлер: 5