The M-Jet 35 development has been finished! Buy the files here and make your boat fly: www.cgtrader.com/3d-print-models/hobby-diy/other/m-jet-35-3d-printable-jet-pump-for-rc-boats
@connorcruz6249
Жыл бұрын
I'm looking forward to ALL future developments you make. From one modeler to another, these jet pumps are absolute masterpieces of engineering.
@simonschneider5913
5 ай бұрын
no matter the outcome for you in terms of money, the things you will learn are invaluable. its something people teaching at university rarely get...all the best!!!
@goodwater2020
Жыл бұрын
Thanks Bud, very excited to get files n parts. Have no problem supporting you. Good luck with college.
@mjetdevelopment
Жыл бұрын
Thanks!
@lolmasterplays655
10 ай бұрын
It would be cool to see you collab with a large jet boat/jetski company and put this on a large scale watercraft ❤️
@mjetdevelopment
10 ай бұрын
Yea would be cool😁 Though things work very differently at large scale, many principles of my pumps are not applicable.
@nej113
Жыл бұрын
I first saw one of your videos 2 years ago, maybe it’s time to build a boat myself😂 Awesome design, very brave to release the files😬
@mjetdevelopment
Жыл бұрын
What do you think? Will you build one😃?
@hunterjames5819
Жыл бұрын
If I can, I will!
@MrDesperadus
Жыл бұрын
The first thing i am doing when i get out of prison is killing the asshole who ratted on me and got me there and the second thing after that is making this pump! Looking forward to this
@nej113
Жыл бұрын
Most likely!
@phaley51
Жыл бұрын
Look like I need to upgrade my m-jet 30 sprint! Just need a hull to put it in, not sure I currently want to go the whole mold and layup route.
@UppfinnarAXEL
Жыл бұрын
Probably👍
@JeffJackson86
Жыл бұрын
Speaking from experience, I bought the Mjet 30 and it was amazing to build. I actually bought a Ender 3 just to print the drive, it was the first 3d print i ever made. It came out well! I ended up putting it in a 33 inch boat and it flies! I also got the Mjet sprint and have made like....6 of them so far. Top notch stuff. Both of the boats are fast and I got 10 times my monies worth out of them. Check my channel if you want to see them, i haven't posted all the videos yet but there is enough to give you an idea. I will def build the 35, i want it in my 33 inch boat, it should be way too much power for that boat! MUUUHHHHAAAAAAAHHHH!!!!! 🤣
@krystofm8141
Жыл бұрын
Gotta love the outro❤️
@thatformanet
Жыл бұрын
So many plot twists in this video!! WOW. Sounds like a good plan.
@mjetdevelopment
Жыл бұрын
Xdd Thanks man:)
@ericbrockhus2518
Жыл бұрын
Hi, can you share some information about the battery you use? I know it is a 6s but don't think I saw any info about runtime vs mah. How many C is needed minimum? and the minimum mah. Do you use one 6s or two 3s in series? two 6s in parallel? Maybe I missed it but can not find info. are there good pictures of the inside when the boat is ready with battery installed? I bought almost the same motor as yours. I have a 3680 1250KV 36L with a flymonster 120 amp boat esc. could you please advice on some battery options vs runtime etc.?
@mjetdevelopment
Жыл бұрын
Hi, I used a single graphene Lipo 6s 2600mAh 70C and gives me something over 10 min runtime. Then I swap the battery to run longer. I would not recommend to go any lower with the C rating. I think you can get 10 min runtime with at least 2200mAh battery. The battery choice mainly depends on your hull size. If you build same hull as me, battery size and weight is somewhat limited, it is hard to tell exactly though. 6s 2200-3000 mAh 70C is the ballpark. There is some footage of my electronics setup and placement in the end of the "M-Jet 35 installation" video. It does not show the battery installed though. If you would like more advice, I can share photos if you ask in the M-Jet facebook group, or you can message me on CGTrader. Your motor choice sounds great. ESC amp rating is also good, even though I do not know that brand.
@user-id1cd7sz1w
Жыл бұрын
will I be able to put on the m jet50 a water cannon from mjet30. 60$ is too expensive for me.
@mjetdevelopment
Жыл бұрын
I understand the price point might not be for everyone. Still, I will not underprice my work. How exactly do you mean your question? M-Jet 50 does not exist😀
@mutosanrc1933
11 ай бұрын
Question, are there files which I can use for CNC machining the impeller? I dont want to order it.
@mjetdevelopment
11 ай бұрын
I don't think it is possible to CNC machine this impeller, because it has very important internal geometry (hollow) which makes it balanced. Additive manufacturing is necessary. Anyway, there is an STL and STEP included for the impeller.
@stonebayrocker
Жыл бұрын
Could it be a possibility to get shape way's to print for you? Or that I could buy high quality prints from them directly to me? Then you could get your share from them.
@mjetdevelopment
Жыл бұрын
Hi, it is definitely possible to order the printed parts from shapeways. But so far I am not planning to upload my designs there in any way. You can just buy the files from me, and order them printed from shapeways. By the way, I still think if you find a small local company that does FDM 3D printing, it will be much cheaper to order all plastic parts from them than from shapeways. And for the impeller, the cheapest/best option currently seems to be PCBWay SLM aluminum. More info to this will come.
@stonebayrocker
Жыл бұрын
@@mjetdevelopment Okay! Understandable that you opted for this route! The new mjet is stunning! Great work!
@user-id1cd7sz1w
Жыл бұрын
Perfect. how much will it cost approximately
@user-id1cd7sz1w
Жыл бұрын
can I make a plastic screw?
@mjetdevelopment
Жыл бұрын
@@user-id1cd7sz1w Price will probably be 60$. You can print a plastic impeller, there will be a separate file with thicker blades for it. It will work, even though not nearly as reliably as a metal one.
@Zeus-oz8sl
Жыл бұрын
@@mjetdevelopment that’s still cheap for all the work you have put into this over the last couple years
@JeffJackson86
Жыл бұрын
@@mjetdevelopment I haven't had any problems with the plastic ones. I did find a couple of secrets to make them stronger and smoother! 😁
Пікірлер: 40