Congratulations Maxim on your recent success, I had the PCBs made from your first version. Very nice, well done.
@adzijderlaan7070
Жыл бұрын
Works very well made😎, greetings from Holland
@HM-Projects
Жыл бұрын
Nice chips mate, looking good 🎉
@MaximKachurovskiy
Жыл бұрын
Thank you for being around 😃
@zenile7087
Жыл бұрын
WEW !!! HUGE improvement, félicitations from France ! I really would purchase a kit from you.
@rodbutler9864
Жыл бұрын
Outstanding!
@humanspirit3432
Жыл бұрын
👍👍👍
@zenile7087
Жыл бұрын
Thanks god, you are alive. Many many many thanks for your videos. Greetings from France.
@humanspirit3432
Жыл бұрын
@@zenile7087 Thank you
@GoPaintman
Жыл бұрын
Very cool as always. How does the software keep track of synchronizing the threads with the spindle? Does it just save an angular position when it starts, and then waits till that position comes around again?
@MaximKachurovskiy
Жыл бұрын
Thanks! It keeps track of "global" spindle and motor position. In thread mode, for any fixed pitch value e.g. 2mm, there's only 1 spindle angle when the pass starts. Once spindle has turned to that angle, pass is started and motor moves a given amount for every 1 encoder pulse. github.com/kachurovskiy/nanoels/blob/main/h4/h4.ino#L2032
@ThantiK
Жыл бұрын
So basically, this is now a "Conversational" lathe. Vs. a "CNC" lathe.
@MaximKachurovskiy
Жыл бұрын
Guess so :) I certainly have conversations with it a times 😄
@azinfidel6461
Жыл бұрын
Electronic Lead Screw (ELS). What makes Maxim's system unique is that it controls both the X and Y axis. Allowing repetitive cuts to be programmed.
@КостяН-р5х
Жыл бұрын
Доброго. Красота. Так держать!
@Renova-tec
2 ай бұрын
Top demais Saudações do Brasil !!🤝
@sorankarim5190
7 ай бұрын
Thanks for your video. Can I use esp32 ch9102 instead of esp32 S3 with resketching pin? or what other alternative board is possible instead of esp32 S3? Thanks
@MaximKachurovskiy
7 ай бұрын
Hard to say, I only tried S3. We use hardware counters and some other versions don't have them.
@sorankarim5190
7 ай бұрын
@@MaximKachurovskiy Thank you for your quick reply. I will try other boards and let you know if it works.
@Jacek380
Жыл бұрын
Hello Maxim, are you planning to replace the buttons in the controller to move the Z and X axes in the lathe in manual mode with rotary encoders. Regards Jacek.
@MaximKachurovskiy
Жыл бұрын
Jacek, it's not hard to implement rotary encoders or joystick with the 2 available extra terminals on the back.
@Jacek380
Жыл бұрын
@@MaximKachurovskiy what is the additional cost to be able to manually move the Z and X axes Regards Jacek.
@MaximKachurovskiy
Жыл бұрын
@@Jacek380 I think it's possible to connect a generic 5V MPG remote using the free ports on the back, I didn't try it yet though. Such remotes are available on eBay and Amazon.
@Jacek380
Жыл бұрын
@@MaximKachurovskiy Ok Maxim, in my lathe, I have an incremental rotary encoder 720 imp/rev 5-24V installed on the spindle, and incremental rotary encoders 1000 imp/rev 5-24V have been purchased to move the Z and X axes in manual mode Can I use it or will I have to buy a new one? Regards Jacek.
@MaximKachurovskiy
Жыл бұрын
@@Jacek380 let's move this discussion to GitHub - you can find the link to NanoEls repo in the description - please start a new discussion there and attach pictures of your lathe and encoders - I think we can make it work though I'm not sure using encoders for axes is going to be very convenient. Thanks 🙏
@Mahor64
Жыл бұрын
С интересом наблюдаю за Вашим развитием. Большое спасибо, что делитесь своими результатами. У меня, как и у многих точно такой же станок. Можете ли Вы посчитать и выставить на продажу, как набор, то, что вы делали ранее для этого станка на 3D принтере ( доработки под шаговые двигатели и проч.) ? Сами шаговые двигатели, ремни и то, что можно просто купить, зная габариты и номинал, в Китае, можно и не считать.
@MaximKachurovskiy
Жыл бұрын
Валерий, спасибо. Модель для поперечной подачи есть на www.thingiverse.com/thing:4714722 - международная доставка стоит 20-35 евро так что мне в отличие от китайских продавцов нет смысла продавать недорогие товары. Печать можно заказать например на JLCPCB. Успехов 👍
@Mahor64
Жыл бұрын
@@MaximKachurovskiy Вы отличный технарь, но продавца надо ещё подтянуть )). Пожалуйста, сложите в одну кучу в одном месте несколько set - ов разного наполнения с картинками и ценой подобно алиэкспресс. Чтоб каждую вещь можно было отдельно докупать в случае её поломки. Я прекрасно понимаю, что там, где Вы живёте на дёшево не выедешь. У Вас брендовые вещи с интеллектной наполняющей. Цена не пугает если аналогов нет. Таких станков сейчас навезли огромное количество. Не просто подобных, а именно этих. Причём по всему миру. В сущности, Вам просто нужно описать подетально изменения в своём станке с ценой за каждую деталь. 3D принтеры это отдельная статься не только расходов, но и усилий\времени. Из тех, кто уже владеет токарным станком единицы имеют принтер. Я бы хотел купить весь комплект так, чтоб распаковал, собрал и работает. Готовое решение, на которое надо просто поднакопить денег. В любом случае, удачи Вам. Боюсь, что Вы не долго задержитесь около токарных и уйдёте в более наукоёмкое))),
@cncsphere
Жыл бұрын
Oh yeah.
@stan_yolo
Жыл бұрын
Still no s-curve acceleration :)
@HM-Projects
Жыл бұрын
You can't do s-curve acceleration reliably on threading operations unless you also control the spindle angular velocity and position at the same time. You can make some assumptions that you have a head start and you'll catch up but it can be error prone. Keep it simple 😅
@stan_yolo
Жыл бұрын
There are movements other than synchronized with spindle like returning on the position.
@HM-Projects
Жыл бұрын
@@stan_yolo yeah agree it's good in those cases, easier on the stepper and the leadscrew. good to have but not a must have feature and you can approximate it exponential function, which will be acceptable.
@MaximKachurovskiy
Жыл бұрын
Some men just want to see the world -burn- s-curve 😃
Пікірлер: 35