I'm sorry about the flicker in some of the footage. Unfortunately this issue arises oftentimes when filming with the GoPro in areas with electric lights and it can be hard to remove after the fact.
@silasmarner7586
9 ай бұрын
It's no problem. It's a great video and the shop is fantastic.
@jimsvideos7201
9 ай бұрын
There may be a menu setting for flicker reduction with the choice of 50 or 60 Hz.
@e.scottdaugherty8291
9 ай бұрын
Hey, it is what it is. Better this than nothing. Not every body needs the biggest & baddest, or the latest & greatest.
@--Lam
9 ай бұрын
Flicker is forgettable, frame blending (which was there) I hate with passion, but all that is nothing. You own us subtitles for the post-credits! What was he saying, it made you laugh, we want to laugh too!
@falcon02012
9 ай бұрын
If he is going to have eye surgery, why is he going to close his shop?
@johnbewick6357
9 ай бұрын
Really glad that most of the tools have been sold on, and will not be scrapped, as so often happens these days because nobody wants to work something that is not computer controlled. Also good that the owner is in charge of selling everything, as he knows what goes with each machine, so often when auctioneers get involved, they have no idea that some machines are useless without all the accessories that go with them.
@JCWren
9 ай бұрын
In my experience, you usually don't find small shops scrapping out the equipment. It's larger companies that do that, where the cost of listing it, selling it, dealing with people wanting to pick it or deliver, etc, outweighs the value of the machines. And often to take the tax write-off, the equipment has to be destroyed. These days, anything that's functional or even remotely restorable can be sold.
@Phiyedough
8 ай бұрын
Yes, in some cases the owner has died and all that knowledge has been lost.
@Kowyn
9 ай бұрын
My town had an old school German machinist years ago, when he immigrated he brought all his tools with him and he stood out for 3 reasons 1: his shop was perfectly clean and organized no matter when you came in even when he was working. 2: his workmanship was unmatched and so was his speed. 3: his talent and knowledge was unsurpassed in many fields not just machining. Unfortunately like all the best skilled trades people he's retired and I'm not even sure he's still alive anymore, I wish I could have worked under him for a few years.
@ALAPINO
9 ай бұрын
I am a specialist welder, mouldmaker in Canada. Our CNC lathes are all Boehringer, some Weiler. Our shop used to be banked with 20+ Bridgeports, and lathes. A lot of it was replaced by fancy large 5-axis and smaller 3-axis machines. We kept the massive vertical and horizontal mills to process and square large stock. Looking at old photos, we had a lot of fantastic old German and Italian machines. There are still a few shops like this here. Sadly, the skills to be proficient in many of these tools is dying off with every old-timer retiring (in one way or another). Every moron (and some who aren't morons) wants to be a CNC Op in college or trade school: It's sexier than hand cranks and dodging hot chips. Training only CNC operators means no one knows how to machine anymore and that is reflected in how hard it is to find quality operators for most machines. While I love seeing inside these shops, it always is sad to know they will all soon fade away. Danke, as always, for sharing!
@custos3249
9 ай бұрын
While true, many places also don't care to train. You either come with the skills, or there's no use applying. The only place around here willing to train last I searched was only willing to pay slightly above retail wages, so it's not just CNC killing the skill.
@ALAPINO
9 ай бұрын
@@custos3249 Every one of the 'old country' gents (mainly from Europe) talk about how regimented the training systems where. Every jurisdiction had their apprentice system. Italians, Hungarians, Polish, UK & Ireland, Austrians, and Germans: They all had established methods of training in one way or another. Passing along the skills and knowledge to the next generation. Some companies are better at training than others. Colleges and vocational/trade schools are closing down programs (in my area, have been closing down since the 90s). Lack of funding from different levels of government and lack of enrollment seem to be the leading reasons (according to the instructors I knew who used to run those college programs). We need skilled people in this trade (and a lot of other trades). We run the risk of no longer making anything on this side of the world worth a darn.
@ALAPINO
9 ай бұрын
@@custos3249 A relative sent me a posting for shop in the automotive mould field a while back: They wanted to pay $2 more an hour to be responsible for their cadre of apprentices (and their training) in addition to almost everything I already do on a daily basis. Some business in some fields are certain more fair with their compensation. I have been told that Automotive is the most 'stingy' of all the sectors here in North America but they can train well. That has certainly guided me far away, but I can't say from first hand experience. My technical career was found later in life. I wish so many more young people knew how fulfilling this kind of work can be.
@KeyboardBuster
6 ай бұрын
Fuck canada.
@Floerp
9 ай бұрын
Always sad to see a machinist with this much experience go. I'm convinced he's one of those people you could listen to for hours on end, talking about all the jobs he did, and with each story you'd learn something new. I wish him the best and also a happy new year.
@ashleysmith3106
8 ай бұрын
My heart goes out to that Gentleman:- I'm 73. and unable to do all the things I used to enjoy due, to health reasons. I did my Fitting and Turning Apprenticeship course back in the 60's, before I went on to other career paths, but I have always owned (and used, until recently) a series of metal lathes. This video takes me back to my youth! Many thanks from an old bloke from Down Under who greatly appreciates your work and your mindset. All the best for the New Year, and Cheers from Rural South Australia !
@ErikvsLenny
9 ай бұрын
What an amazing Shop. Im 26 , from Germany and im really thankful towards you for archiving history in a sense. Danke!
@louisfkoorts5590
9 ай бұрын
Thank you, because you have respect for your own history. You are a source of light. 👋🏻🌿
@williamblackwell9558
9 ай бұрын
A German/ American engineer friend of mine has a machine shop just like that one in Picayune MS. The shop is in an old movie theater from the 30's but the lathes, shapers, and other equipment are from the 1950's or 60's.
@Marcus1954s
9 ай бұрын
He has lived through a decline in German manufacturing and now a time when many have woken up to the necessity of what has been lost. I hope he, and other such professionals, live to see a resurgent manufacturing capability in whichever countries they reside.
@ronniepirtlejr2606
9 ай бұрын
I worked with a machinist shop in the late 90's. they had a lot of German machine tools that looked just like these. The machine shop made the parts for my machine. My machine was also German made. My machine made small Brad nails for nail guns. It was called a wafios nail/wire machine. It was an older machine from Around the World War II era & made 750 nails per minute. We had much newer wafios nail machines in a different part of the factory. They all ran like a well-oiled sewing machine!👍
@hdl4259
9 ай бұрын
Beautiful old workshop. Unfortunately, more and more of these businesses are disappearing. It is very difficult to get hold of such machines because they are usually all promised and spoken for. Judging by the old man's dialect, I would say that he comes from the Cologne area. Another era is coming to an end here. I hope you get the milling machine.
@FunctionalPrintFriday
9 ай бұрын
Best of luck getting that mill. She's a beauty, and the tooling is probably worth 3x the mill!
@Ran-tan-tan
9 ай бұрын
Amazing shop, I bet the owner has a lot of stories to tell! I hope you keep up with him well into the future, dude can probably teach a thing or two to anyone!
@MARKE911
9 ай бұрын
I would love to listen to his stories.
@NotJustBikes
8 ай бұрын
Wow! This really brought back memories of my grandfather's machine shop (he had a tool and die making company). Everything in his shop was that same colour of green, and I can almost smell the distinctive machine grease smell through the video! 😁 Thanks for taking us on this tour!
@Ed-G
8 ай бұрын
Hell, my grandfather was a tool and die maker here in Upstate New York also! Was looking at those machines and drooling. Any thoughts about starting a campaign to help you pay for that mill? I know I would give it. Anyone else?🤙🐾🐾🤙
@plasmaDave
9 ай бұрын
I'm surprised that these workshops are dieing out in Germany. We still have a fair few in at least my area of Australia. The requirements of the mining industry etc make them viable.
@AccidentalScience
9 ай бұрын
Not a surprise: they killed their automotive industry. Were it at least useful to actually reduce CO2 emissions, but battery powered cars won't solve the problem.
@MARKE911
9 ай бұрын
Thank you for sharing this. What an amazing shop. My grandfather was a Machine Shop Worker from 1941 . It was a bittersweet moment as he was the last employee to close the door forever in 1987. The family was all there and it was a memory I will never forget. The building still exist and is still empty to this day.
@billsmith5166
9 ай бұрын
I can almost smell it. What a wonderful place.
@chrissmith7655
9 ай бұрын
Wow!! Heaven, I have seen it now. Many thanks from UK.
@harmlesscreationsofthegree1248
9 ай бұрын
Such a gorgeous shop with beautifully maintained equipment. Thanks for showing us this. This is real history and it’s important to document. Glad this equipment has found a home as well. Equally important to try and save these machines.
@V8SKULLS
9 ай бұрын
What a Beautiful Gem, it's a shame it's closing down. I know we all get old, and things change. But wow.!, the Beautiful machines in there, They really don't make machines like that anymore. I really appreciate you sharing this wonderful shop with us all. God Bless the Machinists and his health. Thank you
@tonys1202
9 ай бұрын
Very cool. I worked in a similar shop in the 1970s in Ohio. Machines dated back to WW2. Last time I drove by it was still there.
@francissamuel8141
9 ай бұрын
As a retired Marine Engineer, this was really refreshing to see. Glad to know that these machines will continue operated by others. Thank you for sharing.
@57WillysCJ
9 ай бұрын
Nice to see the older shop. He is probably not much older than I am so the machine years are the same. Yes the ones I used were made in the US but machines are pretty much the same, even the colors for time periods. A few years ago I read a comment from a young machinist that you couldn't make anything without a CNC. I guess he didn't realise the jet age and the space age were well developed by non CNC machines. The great thing about small shops, they are willing to do small one time jobs. Yes it can be costly and why many farmers bought old machines for their farm shop. Thanks again for this video.
@jan-agelundman5435
9 ай бұрын
What a wonderful workshop! Sad that it won't be sold as a whole and used as it has been used for so long. Nowadays everything seems to have to be CNC-machines...
@alvalle1206
9 ай бұрын
It's not just Germany my freind . Shops like this gentleman's are going if not already gone. Many of my old shop colleagues have passed and are now just good memories I was fortunate enough to know and learn from . I wish your freind well and wish you a Happy and prosperous New Year .
@mariamunoz6160
8 ай бұрын
Thank you for this video. The old green machines are still working around the world wherever people were given the opportunity to buy them from shops that closed down. I saved screenshots of this shop to recall how it is organized. There are many machines in the space but each is able to be used without wheeling another tool out of the way. I hope that the reference charts on the walls are saved when the shop is dismantled. You know from selling posters and maps that paper "ephemera" has value, particularly for a hobbyist or young machinist who needs to look up the right size tool to use. Also, it's just cool to have visible links to past machinists who made so many lovely things.
@eyuptony
9 ай бұрын
So sad to see another old school shop closing down. Really enjoyed your tour of the equipment. Hope you manage to secure the purchase of the milling machine. I'm still drooling over all the content......Thank you.....Tony
@lv_woodturner3899
9 ай бұрын
Thanks for the video. I have my own metal lathe and milling machine, much smaller than the ones in this shop, but having done metal work on these machines makes me able to appreciate the shop and its owner. Sad that eyesight issues means he has to retire. Very good that most of the machines are going to someone who will use them and not just for the scrap yard. I took a tour of the Starret factory in July. They have some machines which go back to the 40's, in addition to some very modern machines. Fascinating. They also had areas which did various specific operations. I appreciate the skill of the folks putting calipers together. Very tiny screws and pieces. Not easy to do for the lay person.
@e.scottdaugherty8291
9 ай бұрын
More of these places are lost, everyone seems to be afraid of "hard work" these days. You my friend are the exception, keep it up, your material is fascinating.
@e.scottdaugherty8291
9 ай бұрын
Oh, I'm in Troy, Michigan. A suburb of Detroit {look, everyone's heard of Detroit, where the cars {kinda} come from.
@jjock3239
9 ай бұрын
What a beautiful old shop. I am sorry to learn that it is all being sold off, but have seen a similar thing happen here where I live. I live in a city of over 40,000 people, with a long association with the forestry industry. In the 70s, there were three large scale logging companies, two sawmills, and a pulp and paper mill, all within a 35 mile radius of here. In addition to the associated maintenance shops that were part of the logging company operations, there were also several large machine shops in town. Over the last 50 years, one by one, all the machine shops have closed their doors. Even two of the logging companies, that operated large fleets of off road trucks and other speciality equipment, have also closed their doors. All the work now, is being farmed out to larger machine shops, operating modern equipment, two towns, one 35 miles, and the other, 70 miles from here. It was a sad thing for me, as a hobby machinist, to see these shops close, and all the capability of doing speciality work and all highly qualified tradesmen being put out to pasture, but somehow, the big companies can operate more efficiently with this new arrangement. What is ironic is, that with my equipment, I could get all the small welding and machining jobs I want, but I am 80 now, and want to work on my own stuff.
@budwilliams6590
9 ай бұрын
My brother-in-law had a shop like this. He bought his equipment from places that were closing down in the Midwest when all the work was going overseas. He could make anything. I wish it was still there.
@juncusbufonius
8 ай бұрын
I started my working life with such machines. They were more often battleship grey though we had some green ones. It was a military shipyard so repainting would use what was there no doubt. I spent some time balancing steam turbines and replacing blades. There were few places that had the space needed for making prop shafts and that was used for the repair and balancing. In the machine shop everything was BIG. 8ft horizontal chuck. Start a cut going and read a few chapters. Repeat. Horizontal reciprocating mills converted to cut semi-circular bearing housings for prop shafts etc.
@bigwave_dave8468
8 ай бұрын
Those Reseda Green machines are so alluring -- they are mostly 'unobtanium' for those of us in the USA. A Deckel style milling machine will last you a lifetime and is a complete game-changer for metal craft. Also, I could not help but think you would do well to have a modern lead-screw lathe like the Weiler in your shop since your antique lathe is quite limited in function having no lead screw nor modern tool post. I'm sure the machines will find happy and willing stewards. Thanks for sharing.
@Floerp
9 ай бұрын
What a beautiful machine shop! We have the same Thiel bandsaw at the place where I work at, too! So sad so see this great 'time capsule', as you very fittingly called it, go, but still, one can only wonder how many projects were realized in this great machine shop. I wish all the best to the (now former) owner of this beauty. And thanks for sharing it with all of us!
@jonfranklin4583
9 ай бұрын
Thank you for documenting this mans shop, it is beautiful! We have the same thing going on in my area, Seattle Washington, the small job shops are closing one by one and the larger ones are getting really expensive which leads to the larger machines being scrapped from these small shops as not many hobbyist's can deal with heavy machines and 3 phase power. That said there are a few of us who do buy and use these machines, mostly for our own projects or in my case building a job shop for my retirement years. Great video and I didn't notice the flickering at all, but I was focused on those fine machines!
@davandd
9 ай бұрын
I appreciate your thoughts man, it really is cool to see your adventures and projects! Keep it up 🙂
@pauloconnor7951
9 ай бұрын
I always admired these places. No matter what planet.
@JBOGermany
9 ай бұрын
All precision surfaces are in best condition (no drilled holes in the table from the drill press and so on) tells me that the owner of the machines takes care of this equipment.
@zygolon
8 ай бұрын
My father was a tool and die maker here in the United States. He started in the early 1950’s. I remember seeing all these sorts of machines in the early 1980’s in the plant my father worked in. Only the ones he worked on were bigger. You had to climb up on a lot of them to make changes and the parts they made were all moved around with cranes attached to the ceiling. All that closed up in the late 1980’s though. Most of those giant machines though were dismantled and sold to a Chinese company. At least some of them are still probably in use.
@broderperdurabo
9 ай бұрын
I'm a velder in southern Sweden. We have drillpreses with 3 and 4 drills on one table (swedish made). the newest one is mad 1964, the one with 4 drills, the one with 3 in installed 1958. Still going strong.
@ahobimo732
9 ай бұрын
I'm SO glad that these machines have homes to go to. It would have ruined my entire week to hear that they were being scrapped. Tools like these can continue to last for decades, maybe even centuries. I'd be willing to bet that there are machines being sold TODAY that will become obsolete junk long before these old work horses wear out.
@billg4630
9 ай бұрын
I was job shop machinist for 20 years...those machines take me back...a lot of machines I operated still had tags stating..this machine conforms to the war production act...really great machines
@benbos6625
8 ай бұрын
It is "Machinist heaven" neighbouring Allen Millyard (0:48") on one- and TOT (rest vid) on the other side. What you saddly could not transfer nor safe: the smell ! Oil + cut metal. That's when you really know "yeah, here the work is done". Tnx TPAI, hope you can score the machine!
@louisfkoorts5590
9 ай бұрын
Beautiful, to the point of tears. I'm no machinist. But I love the era and I know about old-school German standards. (Like You. Even though you are a young man.) I really appreciate this quick video, beyond words. I wish you the best 2024 possible, and a long life. Your stories and memories must stay with us, for the future. 👍🏻👋🏻
@kcraig51
9 ай бұрын
Thanks for showing! I've been machining 36 years. What a treasure room!
@gilbertsprojects2954
8 ай бұрын
My dad recently cleared the remainder of a similar (but much smaller) ‘old-Skool’ workshop. The main machines were already sold and they were removing one large lathe, using a crane to lift it over the neighbours houses, as my dad got there. He did manage to score hundreds of good quality punches, taps, dyes, bits etc.. at a very reasonable price. It originally started as a response to a Facebook marketplace ad but when my dad went to buy the original item it turned out that the seller was clearing out his uncles workshop as he was now in his 80’s and ill health meant he was no longer able to work. It also transpired that he was an ex speedway rider and my dad had watched him race many years ago. Just another instance of ‘not what you know but who you know’ 👍🏼
@phrayzar
9 ай бұрын
What a dream shop. I'm glad that these will continue to be used and people will retain some of the knowledge of how to use them.
@Phiyedough
8 ай бұрын
This brings back memories of the late '70s when I worked at the Clarkson milling cutter factory in England.
@alangreen5858
8 ай бұрын
Enjoyed the video it brings back memories of my first job at the age of 18 back in 1984. I worked in a old school workshop with old school machines some of which where probably 50 years old then! There wasn't much we couldn't make we had an SIP jig borer numerous lathes some v. large with 60 hp motors! Gear hobbers and shapers and many other machines. It is not just the loss of this workshop and it's equipment which in itself is sad but the all the knowledge and experience the engineer who worked them that is very difficult to replace especially in this day and age. Good to hear the machines are not being scrapped though.
@patdowling5
8 ай бұрын
Thanks Gerolf, I really enjoyed this one. Well done for capturing the history here. These are fantastic skills that we are losing as a society - all your work and effort is helping to still make this current , thanks
@parttime9070
9 ай бұрын
The slat boards on the floor remind me of my father's old shop, he would of been 105 this year.. I hope these tools live on for a long time making parts..
@geofffernow
9 ай бұрын
Thanks for the tour. Took me back to the old days when I also worked in a machine shop in Fort Collins Colorado, USA. Many of the devices shown in the video brought back memories. Best wishes for your New Year.
@johnoldonekanole602
9 ай бұрын
So sad to see old master retire. Both machine and operator. Thanks for sharing.
@RickRose
5 ай бұрын
These shops are going away in America as well. I hope you get the mill and give it the respect it deserves. Thanks for sharing.
@steveharvey20
9 ай бұрын
I have a machine shop fairly near me that looks like this guys shop. Its staffed by retired machinists who still make one off's and custom machined parts for anyone. No CNC anywhere in the building! It smells of cutting fluid and machine oil and is an absolute time capsule. Its sad that the town I live in had many large engineering companies who were world renowned but sadly are gone now - what skills have been lost to 'modernisation' with CAD and CNC machining. Thanks for the video and good luck for the old guys eye surgery.👍
@johnkey2834
8 ай бұрын
What a clearly well organized machine shop sorry to hear that due to eye surgery that he has decided to sell up, thanks for showing us a place of high quality engineering.
@thejackofalltravels8267
9 ай бұрын
I hope for a successful recovery from the surgery. Thank you for a glimpse into a master craftsman’s work space. Those tools are amazing
@xoxo2008oxox
8 ай бұрын
FYI- With gopro you need to manually set the FPS to something like 50fps or 100fps since you are likely on 50hz power (EU) vs US 60hz. And/or a slower shutter speed. One never thinks about the strobe effect till after when you watch/edit. What a wonderful machine shop! Its just laid out so well. If Post Apocalyptic did a gofundme for the mill... or you need something donated for the mill... I'm sure us subscribers would donate! Fröhe Festtage!
@stormkhan4250
9 ай бұрын
My father in law ran his own small shop and just like your guest he had all the old style manually operated machinery & tooling. You don't see these much anymore with most shops having gone CNC now.
@mathewmolk2089
8 ай бұрын
It's obvious nobody here is in the machine industry business.or they would not be putting out all this bad information. CNC is worthless for the kind of work you do in these shops. Repair and prototype is no place for CNC There are hundreds of these kind of shops in the USA and they are all thriving.
@campbellmorrison8540
9 ай бұрын
Wow, Im so pleased to hear this is not just being sent to scrap which seems all too often the case. My lathe is the green period and I love it
@ivannightly1919
6 ай бұрын
so sad to see a man of this skill lose his site at least he found them new homes, it would cost a fortune to buy such a setup today. thanks so much for this trip
@johnkreno2488
9 ай бұрын
I wish your friend good luck on his surgery. This is nice
@progressive_rc
9 ай бұрын
It is happening everywhere my friend.... It's the same in Portugal, all the small machine shops are run by old timers that are retiring and closing doors.
@nikmilosevic1696
9 ай бұрын
This reminded me of my father, he was a fitter, turner and toolmaker. Still have a couple of his old lathes, a small one and a larger one. Wish I had one of his mills tho.
@jimsvideos7201
9 ай бұрын
I'm glad to hear the machines have new homes. Happy new year! Thank you for the adventure!
@colinstu
9 ай бұрын
Great shop! Hope/Bet all that equipment and tools and stock will find new homes.
@slomkaadas9603
8 ай бұрын
Great video. Thank you very much for sharing this treasure with us. As for the owner of the plant - I wish him good health and good luck with the operation. Warm greetings and all the best in the new year!
@MrShobar
9 ай бұрын
Ich habe diesen Ausflug zu einem einzigartigen Geschäft genossen. Vielen Dank.
@tomasjosefvela1
9 ай бұрын
Amazing! What a treat to know someone like this that still exists...Thanks for sharing.
@evensgrey
8 ай бұрын
I am glad that the owner of the shop has found new homes for the machines.
@miahsbrokengarage
9 ай бұрын
Nice tour! Looks like a great workshop!
@theoldstationhand
5 ай бұрын
Great video - my pick would be the VDF Boehringer. Over the years that's the only lathe I have ever operated that was capable of taking a cut the full width of a carbide insert tool! It was also equipped with a tracing attachment and could be set up to pull out of a cut when screwcutting up to a shoulder at 900 rpm.. Thanks for posting this. Cheers
@bubbadmatt8124
8 ай бұрын
Even though machining is out of my skill set, I can appreciate how lovingly well thought out the layout of the place based what I've seen in this video. It's definitely a bummer that it's going to close but hopefully the new owners take care of each item and that they will come to equally appreciate those tools and get good use out of them.
@hilltopmachineworks2131
8 ай бұрын
Thanks for the shop tour. It is always a sad day when a shop closes its doors.
@chuxxsss
9 ай бұрын
I know off a shop like that in Harcourt Victoria Australia. The guy said he was going to scrap the machine. Now, he is saying that his shop is probably 5 x the size or more of the shop you are covering now. His is at the back of a farmhouse in a very big shed.
@katiemmm347
5 ай бұрын
Good to see drill presses that dont have holes drilled everywhere in the bed 👍
@deadlyduck11
8 ай бұрын
Reminds me of alot of the equipment i used in my apprenticeship and during school. Looks very similar because they all had the really old equipment which was high tech at the time combined with some cnc machinery in addition. Very cool to see that. Interesting to hear how they didnt learn more than one machine during the entire working life, now a days in norway at least we learned all sorts of machines a bit at least during the apprenticeship of two years
@krismorgan
8 ай бұрын
We had the same type of machimery in the place i worked in the center of birmingham 30+ yrs ago,all gone now for flats and shops sadly.Good times.
@DannyAckermans
8 ай бұрын
Wauw. These machines are like gold! Undrestructable and made to last
@ZenithClarity
8 ай бұрын
Tons of great old still AWESOME machinery there. Got to say though, that is the "tightest" machine shop i have ever seen!
@mohabatkhanmalak1161
9 ай бұрын
That old shop is invaluable, it would be serving the place and industries there. 🐞There are not many such machine shops anywhere nowadays with the 'throw away society' we live in. My dad ran his own auto-truck repair shop in Uganda in the 50's to early 70, and he used to say that German machine tools were of very good quality. The German steel mills produce very good🐝 metals and down the line the design and engineering is also top notch. My favorites machines here, ☘the two lathes, the big drill press at 4.43, and the 'Eisele' metal saw. The machinist owner made a very usefull extension table there.🏵
@TheAyrCaveShop
9 ай бұрын
Wow, Thanks for the tour. The condition of the workshop shows the level of pride and craftsmanship 👍 Nice to hear the machines are getting new homes. Enjoyed ! Happy New Year
@bland_lover
8 ай бұрын
I worked with machine tools, pretty much all of my working life. A lot of those Machine models made their way to the UK. I have seen VDF, Flott and Weiler lathes over here. I hope you can pick up the milling machine. It looks a really useful tool. As you said, the machine is extremely useful because of the extra tooling. Whilst most tooling can still be bought, it is very expensive. So, if you can obtain the machine and the tools, you’ll have some very useful equipment.
@sofa-lofa4241
8 ай бұрын
I have worked in a few small 'job shops' in the UK in the 80's and 90's, There are some nice machines there, the universal mill you are hoping to buy is a really useful bit of kit, The tooling alone would have cost many thousands of Euros over the years... Good luck! Seeing the surface plate with no punch marks immediately told me I was in a German shop (or maybe Japan?)
@no-expert
9 ай бұрын
I really like this sort of Time Capsule video with the old style machines. It delivers a feeling of nostalgia even though I’m too young to have experienced it myself if that makes any sense :D
@NOTAFULLUN
4 ай бұрын
Brilliant presentation. Very sad to see all this being broken up, and the people that use them no longer passing on the wealth of knowledge they have amassed.
@scrapwomblecreatives6944
9 ай бұрын
what a grand workshop, what a skilled man like yourself. Have watched you many years here but alas I am but a poor man struggling with my own ideas but wish you well
@Mooreish
9 ай бұрын
There's a similar old school machine shop near me in Cromford Derbyshire, that will have a similar fate when the current owner retires. I only discovered his existence when I needed a custom one off part making up to repair an old differential that had been previously modified by the military.
@mathewmolk2089
8 ай бұрын
BINGO! - A CNC shop could not have handled your job. There will always be manual shops/
@TERRYB0688
9 ай бұрын
Nice to see a relatively compact machine shop, some nice machines with thousands of pounds of tooling, these old machines are work horses, nice to see but there are many small workshops being sold off, it’s the sign of the times
@dontquestionjustbelieve5757
9 ай бұрын
This was amazing to see such a well kept time capsule and to compare it to to new shops I've seen on youtube
@joshschneider9766
4 ай бұрын
Also times two on being happy to see the tools of a job shop live on even though the shop closed.
@electricalychalanged4911
9 ай бұрын
I work at a german University and one of our machine shops still looks like that and nearly all of the green Stuff still runs perfectly. Sadly a lot of tasks could be much easier done by a modern multiaxic CNC but the guys in the shop keep on producing miricles with the machines they have. I hope all these machines keep on running even if they are not suted for all the moden tasks, the are NOT useless.
@fleursworkshop1453
Ай бұрын
the Weiler Condor VS there sure seen some work. im currently overhauling all the machines at my place of work with emergency stops and the weiler is one of them.
@Gary.6.10.19
9 ай бұрын
Good luck on the eye surgery friend of the channel. Thanks for sharing your shop with us!!
@jackmunch6108
9 ай бұрын
What a beautiful shop with green plants and the fattest shopcat i've ever seen 😁. Gerolf, you got me started on youtube university years ago, before you moved to Köln, danke for that and guten rutsch 2023.
@freetolook3727
9 ай бұрын
I missed the cat. Where was it? 🐈🤔
@jackmunch6108
9 ай бұрын
2:49
@freetolook3727
9 ай бұрын
Good eye! I had to rewind a couple of times and pause to see it and even then it just looks like a towel or rag thrown on the couch. 🤓😅😂
@jaimeortega4940
9 ай бұрын
Always like your content and the "old school" products you show takes me back in time and puts a smile on my face.
@kestlovs
9 ай бұрын
In my early forties, I have bought a crank operated mill recently. Boy, is that thing heavy :D The shipping alone will be a feat.
@JH-gy7fn
9 ай бұрын
I worked as a machinist for 35 years , My first jub was making tapered threads on oil drilling pipes.
@paulstanding7267
9 ай бұрын
It was so nice to see the old machines still being used it take me back to my school day. Unfortunately nowadays modern technology has exceed and now most are made redundant or scraped never to be seen again maybe in a museum. Happy new year to you all. 👍😀😀 ps keep all your videos coming as very interesting and informative.
@robertgeorgewerner
9 ай бұрын
Please thank your friend for sharing his shop with us and wish him a quick and painless recovery. The end of an era but hopefully others will be able to carry on some small part of your friend's legacy!
Пікірлер: 388