Well... Easy way to get rid of it: first of all, you are making a copy of door key on a laser cutter, so you can operate this thing with open door. At second you take some sandpaper and polish this thing until it shines like balls of the cat.
@JSMPrimeOperations
Жыл бұрын
Thats what we Turning Guys call SFM Zonk, those SFM Zonks tend to like a little more cutting force with a deeper depth of cut, and a little bit more feed, but that tool angle doesn't offer any favors either, considering what's there it's a pretty decent little guy :P them small parts and them raging RPMs I tell ya,
@Kryptonian76
Жыл бұрын
It's nice that the cutting bits also look like art.
@TungaloyCorporation
11 ай бұрын
Thank you for liking it!
@alexnielsen6880
12 күн бұрын
Tungsten tool bits are incredible.. the are light as a feather but atleast 10× stronger then regular steel bits
@automan1223
Жыл бұрын
you guys have the nicest short cnc videos on YT !
@TungaloyCorporation
Жыл бұрын
Thank you so much for your compliments! It means a lot to us to hear you say that!
Definitely needs coolant on the one I run, ran it without coolant for 5 seconds and saw sparks flying 😂
@inthefade
Жыл бұрын
I never knew that I wanted an entire set of machined steel chess pieces. Maybe one set would be gun blued. It would be so satisfyingly to play on a dense hard wood board.
@TungaloyCorporation
Жыл бұрын
Thank you for watching the video!
@DarthGTB
9 ай бұрын
Put one of the sets to rust and coat the other to not rust
@ChetanSharma-e1k
2 ай бұрын
I never knew I wanted an antique set of machined steel chess pieces. If you want to buy it then come to our link
@東天紅鶏-h2z
Жыл бұрын
ケースから取り出すときにピンセットを使い刃先を避けて持つの好き(好き!
@TungaloyCorporation
Жыл бұрын
コメントありがとうございます! 刃先命でございます!
@arnaldoalbelda1769
Жыл бұрын
Amazing tools...
@TungaloyCorporation
Жыл бұрын
Thank you for the great compliment!
@Guestpass13
11 ай бұрын
Beautiful presentation 😮😊
@TungaloyCorporation
11 ай бұрын
Thank you so much for your compliments! It means a lot to us to hear you say that!
@russguppy8761
Жыл бұрын
Gloves maybe, but Tweezer to pick up inserts. I don’t think so. Good video.
@TungaloyCorporation
11 ай бұрын
Thank you for your comment!
@DenisKorablev-h7p
6 ай бұрын
Мелкие вставки удобно доставать с помощью пинцета
@Winter1881
Жыл бұрын
Очень класно и профессионально,люди будут покупать такие фигугы и шахматы,покажите как вы сделаете коня😊
@TungaloyCorporation
11 ай бұрын
Спасибо за ваш комментарий
@ОлегПаршуто
10 ай бұрын
Коня сделают на фрезерном.😊😊
@alex_ex96d25
8 ай бұрын
😂😂😂😂😂
@sergeyremains9512
8 ай бұрын
станок с чпу.проше простого.сделай это на 1к62@@TungaloyCorporation
@Виталий-я9ы9э
8 ай бұрын
@@sergeyremains9512а чё там делать, если ты токарь? Кроме коня можно на кашке все фигуры сделать.
@HDitzzDH
Жыл бұрын
Looking at the surface finish there seems to have been some vibrations.
@OG_SENSEI
Ай бұрын
OMG it's so smooth 😭😭✨
@TungaloyCorporation
Ай бұрын
Thank you for liking it!
@alfredoluisbaute1579
Жыл бұрын
Una maravilla de torno ....
@TungaloyCorporation
Жыл бұрын
¡Gracias por su interés!
@s2Nelsons2
Жыл бұрын
Legal foi ele responder em espanhol kkkkkk
@roberdanger
Жыл бұрын
Love watching the finishing pass. Slow it down a little for smoother finish
@TungaloyCorporation
Жыл бұрын
Thank you for liking it!
@stacycullum3597
Жыл бұрын
Worlds most expensive chess piece.....
@TungaloyCorporation
10 ай бұрын
Thank you for watching the video!
@ayyanathanmechanical
10 ай бұрын
Beautiful work
@TungaloyCorporation
10 ай бұрын
Thank you for the best compliment!
@burgadahz17
Ай бұрын
This machine is even more precise than aimbot.
@TungaloyCorporation
24 күн бұрын
Thank you for liking it!
@consciouslasagne354
Жыл бұрын
Beautiful
@TungaloyCorporation
Жыл бұрын
Thank you for your good comment!
@CNCExpert
Жыл бұрын
Love watching the finishing pass.
@TungaloyCorporation
Жыл бұрын
Thank you for the best compliment!
@TheSzakker22
Жыл бұрын
Perfect! This is steel?👍
@TungaloyCorporation
Жыл бұрын
Thank you for your comment! Yes, work material is steel!
@Stan-lq1ep
10 ай бұрын
These are one of the most awesome things I'm actually inspired to try and find how to get a job doing this, really awesome.
@TungaloyCorporation
10 ай бұрын
Thank you for the best compliment!
@fernandoveranojimenez
Жыл бұрын
Es maravillosa la maquina
@wilneal8015
Жыл бұрын
😮And It's Pricey As Well😢👍🤗👀✨
@TungaloyCorporation
Жыл бұрын
¡Gracias por su interés!
@danashay
Жыл бұрын
Smoooth. Well played.
@TungaloyCorporation
Жыл бұрын
Thank you for your compliments!
@hernandezjose9912
Жыл бұрын
Very Nice ❤
@TungaloyCorporation
Жыл бұрын
Thank you for your compliments!
@ABIELYASHARAHLA
11 ай бұрын
It amazes me how ceramic cutters can do what they do. Unbelievable!
@TungaloyCorporation
11 ай бұрын
Thank you for your interest!
@phillhuddleston9445
11 ай бұрын
These are carbide not ceramic.
@reimi8841
Жыл бұрын
Amazing 🎉
@TungaloyCorporation
Жыл бұрын
Thank you for liking it!
@timothy098-b4f
Жыл бұрын
The pressure on the tip of that insert must be ridiculous. Carbide is amazing stuff.
@TungaloyCorporation
11 ай бұрын
We agree! Sharpening iron is amazing!
@nc4805
Жыл бұрын
チェスの駒シリーズですね!
@TungaloyCorporation
Жыл бұрын
はい!シリーズにして最後は社員同士の対決を配信したいと思っています。笑
@pjotrmahouwits
Жыл бұрын
Soldier 💂
@hasanyalcn4821
Жыл бұрын
Şah
@ВасилийЕртыбашев-г2щ
Жыл бұрын
Красивая пешка, залипательно! 😊
@TungaloyCorporation
Жыл бұрын
Благодарим вас за проявленный интерес
@Snooppacoff
Жыл бұрын
Еб.нные шахматы)
@indubitably424
Жыл бұрын
Looks good. Do it on a manual now.
@TungaloyCorporation
Жыл бұрын
Thank you for your comment!
@indubitably424
Жыл бұрын
Lol. Just giving you a hard time. Apprentice manual machinist here, left handed and learning lathe now myself so I like seeing this content.
@globalrezzanate9399
10 ай бұрын
@@indubitably424 Fair play lad. There is a reason for manual and CNC. Manual is a great way to learn the mathematics and then apply it to CNC and your life will be easier and you will make more interesting parts ..
@Epic_Shitzz
2 ай бұрын
Amazing work.... What are those cutting bits are made of...?
@TungaloyCorporation
2 ай бұрын
Thank you for your comment! The material of the insert is made of cemented carbide, which is the second hardest material after diamond!
@Epic_Shitzz
Ай бұрын
@@TungaloyCorporation thanks a lot for this information 👍👍
@stocchinet
Жыл бұрын
Remember, engravings give you no tactical advantage whatsoever
@TungaloyCorporation
Жыл бұрын
Thank you for your valuable opinion.
@travisowens8602
6 ай бұрын
I used to work in a machine shop when I was 21 or 22. I was on and end mill was think, I used to love to watch the lathe machines work, it was really satisfying to watch.
@TungaloyCorporation
6 ай бұрын
It's fun to watch these processing videos! There are many more, so please take a look.
@nikosozturk801
Жыл бұрын
Vnmg R0.4 and Dcmt R0.8
@TungaloyCorporation
Жыл бұрын
Thank you for your comment!
@dannydetonator
Жыл бұрын
:-D And TiO2 coating..
@azwan7877
Жыл бұрын
Dnmg 0.8 and vnmg 0.4,
@LinhNguyen-cn6pf
Жыл бұрын
YNMG 331
@LinhNguyen-cn6pf
Жыл бұрын
And DNMG 431
@joshyoung1440
8 ай бұрын
Looks like a chess pawn! Make a whole set!
@TungaloyCorporation
8 ай бұрын
This is a pawn processed! We are planning to have all of them, so please look forward to it! kzitem.infoQfDE0Mq2Smw
@ХамзатМагомадов-э3с
Жыл бұрын
Превосходная работа!! Просто класс!! Респектище!!
@TungaloyCorporation
Жыл бұрын
Благодарим вас за проявленный интерес
@ryonaicorp
Жыл бұрын
That has to be the nicest ass plug I’ve ever seen😮
@vipinelias7573
8 ай бұрын
Nice work
@TungaloyCorporation
8 ай бұрын
Thank you for liking it!
@ogliberty5486
Жыл бұрын
Were the tweezers necessary?
@TungaloyCorporation
Жыл бұрын
Thank you for your comment! Yes, we took safety into consideration!
@ogliberty5486
Жыл бұрын
@@TungaloyCorporation you used your hands when placing it into the holder. So make the tweezers make sense when taking it out of the box? Are you just so corporate that you can’t admit that’s redundant?
@TungaloyCorporation
Жыл бұрын
@@ogliberty5486 It was difficult to insert with tweezers and was set by hand. Thanks to the gloves, I was able to set it without problems!
@ogliberty5486
Жыл бұрын
@@TungaloyCorporationso why use the tweezers? Can you just say it was for the video? Because they serve no function.
@TungaloyCorporation
Жыл бұрын
@@ogliberty5486 When attaching the insert to the holder, it was difficult to do with tweezers, so I attached it with gloves on. Although it is possible to remove the insert by hand, we used tweezers to avoid making it difficult for the viewer to see the insert.
@ГригорийГудков-ч6щ
Жыл бұрын
А коня так может вытачить?
@TungaloyCorporation
Жыл бұрын
Спасибо за ваш комментарий
@АлексейЛозовский-м4х
Жыл бұрын
Только лошадь)
@paff4eg
10 ай бұрын
Могу кобылу в соседнем цеху запилить на восьмиоснике 🙂
@JosephMostowy
2 ай бұрын
Actually, that part has a mirror finish. There was another different big part on the bench that was only roughed. You just see the reflection. Lol
@TungaloyCorporation
2 ай бұрын
Thank you for watching the video!
@irwandisusanto2406
Жыл бұрын
Amazing
@TungaloyCorporation
Жыл бұрын
Thank you for the great compliment!
@joshuabravener3856
Жыл бұрын
This is neat i wasn't sure how to get that steel done in that fashion
@andreyv3432
Жыл бұрын
Мы делаем металлические стружки, много стружки!!
@TungaloyCorporation
Жыл бұрын
Спасибо за ваш комментарий
@oldnick4707
Жыл бұрын
Hah! Didn't see that one till the very end! 😂
@TungaloyCorporation
Жыл бұрын
Thank you for watching the video!
@justdoiteasyfixservice9488
Жыл бұрын
I want that chess set I’m a old tool and die maker and I would really appreciate something like that.
@TungaloyCorporation
11 ай бұрын
Thank you for your comment! The next one is planned for December, so please look forward to it!
@jiuxie4941
8 ай бұрын
perfect you can see our factory
@TungaloyCorporation
8 ай бұрын
Thank you for liking it!
@thomasgorecki1321
Жыл бұрын
Nice, but that’s a tough way to make a chess piece!
@TungaloyCorporation
Жыл бұрын
As you said, it was difficult! We will be doing the second part in December, so please look forward to it!
@Max_Marz
2 ай бұрын
Chess pieces are the benchy of the cnc lathe demo world.
@TungaloyCorporation
2 ай бұрын
Thank you for your comment!
@Генадий-ч4и
Жыл бұрын
Работал в УПК ученики с удовольствием точили фигурные изделия, шахматы, ♟, подсветчники (тв4 СССР 87г)
@TungaloyCorporation
Жыл бұрын
Благодарим вас за проявленный интерес
@junes2k
29 күн бұрын
I watch one cnc video now it's all trailer hitches & chess pieces.
@TungaloyCorporation
11 күн бұрын
Thank you for your comment.
@RealNotallGaming
11 ай бұрын
next time use F0.02mm for finishing, a G50 (rpm limit) and a more tough finishing pass ^^
@TungaloyCorporation
11 ай бұрын
Thank you for your valuable advice! The next one is planned for December, so please check it out as well.
@saygefujiwara-id6pr
8 ай бұрын
Awesome incisors, 👍👍👍👍
@TungaloyCorporation
8 ай бұрын
Thank you for the best compliment!
@clintonmiller4917
Жыл бұрын
I have no knowledge of CNC Machines or they work. And don't want to know either. But I could watch them work all day. Lol.
@TungaloyCorporation
Жыл бұрын
Thank you for watching the video!
@Cody357
Жыл бұрын
Ooo a pawn!
@TungaloyCorporation
11 ай бұрын
Thank you for your comment! The next one is planned for December, so please look forward to it!
@louhartin4483
Ай бұрын
That’s just a pawn in this machining game
@TungaloyCorporation
24 күн бұрын
Thank you for your comment!
@МиланДобрић
Жыл бұрын
Well done.
@TungaloyCorporation
Жыл бұрын
Thank you for your compliments!
@facorread
Жыл бұрын
The first 3 seconds looked as if you were going to play DnD
@TungaloyCorporation
Жыл бұрын
Thank you for watching the video!
@LinhNguyen-cn6pf
Жыл бұрын
We used Tungaloy insert 20 years ago. Now we using CNMG 432, DNMG 432, VNMG 331 HRM AH 8015 for Inconel 718 150 Ksi cut very good
@TungaloyCorporation
Жыл бұрын
@@LinhNguyen-cn6pf We are glad to hear that! We look forward to working with you!
@bigdog8177
Жыл бұрын
Try a 3 radius insert 😊
@TungaloyCorporation
11 ай бұрын
Thank you for your comment!
@ПродажаСоломорезки
Жыл бұрын
Просто прекрасное зрелище для души
@TungaloyCorporation
11 ай бұрын
Благодарим вас за проявленный интерес
@ThePatriotParadox
Ай бұрын
This is what i want to do.... Machining with all old-school type machinery, really want to step up and learn CNC programming etc. i feel it's the next level to progress in machining. That and a metal additive 3D printing!
@TungaloyCorporation
Ай бұрын
You are a future engineer! That's amazing!
@ThePatriotParadox
Ай бұрын
@@TungaloyCorporation thank you, I've always been a mechanic and worked with machining equipment, like lathes, presses, numerous metal fabrication tools and also welding.... And have always loved engineering on a small scale, producing parts or tool's needed for things I didn't have or part's I couldn't afford. Always have been computer literate, CNC programming and additive manufacturing with semi precious metals seems so appealing and because there are things I want that I only want to build.... NOT BUY
@ThePatriotParadox
Ай бұрын
@@TungaloyCorporation Do you have any information or videos on additive manufacturing/ 3D printing?
@TungaloyCorporation
Ай бұрын
@@ThePatriotParadox We have a little bit of it, so please watch this video. kzitem.info/news/bejne/ymmZy2Gfs3Roomk
@PinpointR
4 ай бұрын
Should call that one Aztec spear
@TungaloyCorporation
4 ай бұрын
Thank you for your comment!
@RealNotallGaming
11 ай бұрын
i still remember the best cutter i ever used was like QSER\L and 3.something mm (old series) was beautiful F0.04mm thank you tungaloy ^^ sadly turning inserts are a little under the competition ^^
@TungaloyCorporation
11 ай бұрын
Thank you for using us for a long time! We will do my best to contribute even more to turning chips!
@vinoddusang7784
Жыл бұрын
Its very easy for me but my company will never give me chance to make this timepass piece
@TungaloyCorporation
Жыл бұрын
Thank you for your interest! Are you a machinist?
@erosnolove
2 ай бұрын
Can you tell me what camera you used to record this video?👉👈
@TungaloyCorporation
2 ай бұрын
Canon SLR camera!
@fathudin7090
Жыл бұрын
Mantaaaapp.... 👍
@АлексейРомахин-п4ф
10 ай бұрын
Эту пешку я запомнил как делать. Давай выточим, на токарно-винторезном, коня.😂
This time we did it dry so that you can see the processing and the product carefully! We think that problem will be solved if you process it with coolant!
@dharamendarakumar9776
8 ай бұрын
Good luck hai bhahi😊
@TungaloyCorporation
8 ай бұрын
Thank you for your comment!
@dmitriyzolotuhin591
5 ай бұрын
Эти резцы, как артифакты с другой планеты.
@TungaloyCorporation
5 ай бұрын
Спасибо за ваш комментарий
@tentoten-kp6zn
Жыл бұрын
めちゃかっこいい!
@TungaloyCorporation
Жыл бұрын
凄く嬉しいです😭 ありがとうございます😊⭐️
@los4vws
Ай бұрын
I find it funny when their like look what I made. N I’m like no the machine did. You just pushed a few buttons.
@TungaloyCorporation
Ай бұрын
You are made of machines, tools, and people!
@FujiHarumi
Жыл бұрын
Kelassss 🔥🔥🔥
@TungaloyCorporation
Жыл бұрын
Thank you for your comment!
@miplanshet7426
11 ай бұрын
Хорошая пешка получилась, а коня сможешь так сделать?
@TungaloyCorporation
11 ай бұрын
Мы готовимся к следующему выпуску в декабре, так что ждите его с нетерпением.
@MikeFetzer-b7j
Жыл бұрын
Nice pawn! I'm old school, before CNC, why no lube&coolant. Would'nt make the tool last longer?
@TungaloyCorporation
Жыл бұрын
Thank you for your interest! This time we did it dry so that you can see the processing and the product carefully! We recommend using cutting oil!
@chrisbrandon511
11 ай бұрын
I thought it to be the bishop
@Raghunath0405
11 ай бұрын
Super fantastic ❤❤❤❤❤
@TungaloyCorporation
11 ай бұрын
Thanks 🤗
@feniksflash166
8 ай бұрын
Эти резцы как произведение искусства...
@TungaloyCorporation
7 ай бұрын
Благодарим вас за проявленный интерес
@englishjake
Жыл бұрын
Needs a sanding but amazing code
@TungaloyCorporation
10 ай бұрын
Thank you for liking it!
@manhoodshakir8062
Жыл бұрын
Great and strong tools ❤❤
@TungaloyCorporation
Жыл бұрын
Thank you for the great compliment!
@ostendfaxpost1
Жыл бұрын
Let the tools and engines do the work. We make party.
@TungaloyCorporation
Жыл бұрын
Thank you for your interest!
@mountbou1640
11 ай бұрын
Mit welcher Steuerung und welchem Zyklus bearbeiten sie das Werkstück?
@julioserrano4624
Жыл бұрын
Muy satisfactorio!
@TungaloyCorporation
Жыл бұрын
Muchas gracias por sus cumplidos. Significa mucho para nosotros oírle decir eso.
@islampolo4532
Жыл бұрын
На финише это будет самый технологичный и дорогой набор шахмат, если там работать, то нет проблем.
@TungaloyCorporation
Жыл бұрын
Благодарим вас за проявленный интерес
@samtyuser-km75v
11 ай бұрын
Нашел чем похвастаться. А ты на станке 1960 года выпуска попробуй поработать 😂
@TungaloyCorporation
11 ай бұрын
Спасибо за ваш комментарий
@cocospops9351
11 ай бұрын
You want Moszkowski maybe? No. Plays Moszkowski.
@TungaloyCorporation
11 ай бұрын
Thank you for your comment!
@theabstudios3174
9 ай бұрын
Damn we came from knowing only how to light a fire to this 😳
@TungaloyCorporation
8 ай бұрын
Thank you for your comment!
@Petrolhead99999
Ай бұрын
Our VNMG inserts say "PP" on them
@TungaloyCorporation
24 күн бұрын
Thank you for your comment!
@_VaporWolf_
3 ай бұрын
What's the material and your speed and feed?
@TungaloyCorporation
2 ай бұрын
Thank you for liking it! ■Products & cutting conditions ①Holder : ADJNL2525M15-A, Insert : DNMG150408-TSF T9115 Vc = 200 m/min, f = 0.15 ~ 0.2 mm/rev, ap = 0.25 ~ 1.25 mm ②Holder : AVVNN2525M16-A, Insert : YNMG160404-ZF T9225 Vc = 150 ~ 250 m/min, f = 0.1~ 0.15 mm/rev, ap = 0.25 ~ 0.5 mm ■Work material : C45
@jiuxie4941
8 ай бұрын
the tolerance is accurate
@РоманЕпанчинцев
Жыл бұрын
это шедевр !!!!!
@wilson_goncalves
Жыл бұрын
❤❤❤❤lindo trabalho, parabéns
@TungaloyCorporation
Жыл бұрын
Obrigado pelo melhor elogio!
@buivansang826
Жыл бұрын
Hàng chất lượng cao 🥰🥰🥰👍👍👍
@andrescosta3678
Жыл бұрын
Muy bueno....perfecto
@TungaloyCorporation
Жыл бұрын
Muchas gracias por sus cumplidos. Significa mucho para nosotros oírle decir eso.
@LawapanEbenezerParé
2 ай бұрын
I like so very well your job
@TungaloyCorporation
Ай бұрын
Thank you so much for your compliments! It means a lot to us to hear you say that!
@ВладимирБарбашев
8 ай бұрын
Красота!
@TungaloyCorporation
8 ай бұрын
Благодаря за най-добрия комплимент!
@ВладимирБарбашев
8 ай бұрын
@@TungaloyCorporation Желаю Вам успехов в вашем деле. Приятно видеть плоды хорошего труда!
Пікірлер: 1 М.