The most modern factory in the country you should see what the old factory looks like
@CATech1138
Ай бұрын
everybody talking bad about the lack of ultimate precision has never worked on old machinery, lots of shims to get tolerances right.....and given that these cranks are for large compressors, even the throw angles can be off several degrees and still work fine
@HK-uq9by
Ай бұрын
They can also make of few pieces like motorbike carnks, no? That makes the work easier
@kaivirkkala3213
Ай бұрын
Working in flipflops!
@ac9081
Ай бұрын
Flip flops approved by OSHA and EPA😩😩😩
@adamgentry332
Ай бұрын
It's called freedom. What we no longer have in the American work force
@damojfowler
Ай бұрын
For the price of a pair of safety glasses, is it really worth losing an eye and being left unable to work and provide for your family?.... The management of this company should be ashamed to allow it's employees to work without even basic safety protection.... To put this video on KZitem for the world to see is just beyond words.
@koenvelaers9876
Ай бұрын
I’m already surprised to see they are wearing sandals instead of being barefoot… and then these sleeping gowns they wear, if it gets caught in the lathe…
@koenvelaers9876
Ай бұрын
Don’t forget it is an islamic land, if something happens it is not due to their lack of common sense but it’s faith, the will of Allah…
@Leland387
Ай бұрын
That’s on them. If they want there eyes they will protect them. Have money for Bluetooth in there ear. You can’t teach common sense.
@wackyvorlon
Ай бұрын
I’ve talked to people online who work in shops like this in these countries. They won’t even let you send them free safety glasses. I think there’s a lack of proper safety culture, and honestly I don’t think anybody who isn’t there and in the middle of it can actually change it.
@Jules_73
Ай бұрын
It’s India/Palistan where labor and life is cheap. They wear safety squints and sandals, don’t you know?
@tassie302gt
Ай бұрын
Safety spec sandles amongst those mountains of swarf on the floor clearly works good 👍 steel toed boots are for panzies
@gregyoungman
28 күн бұрын
That’s what Ive been SAYING
@Sole-mio-official
24 күн бұрын
Наверняка у них тапочки из жаропрочных материалов и очки 👓 излишне на токарке😮 . Просто жесть.
@waynec369
Ай бұрын
Always good to see clean, well kemp equipment.
@Pakistani-Hands
Ай бұрын
Thank you sir for your love
@dondr267
Ай бұрын
@@Pakistani-Hands😮
@waynec369
Ай бұрын
@Pakistani-Hands not too keen on sarcasm, I see...
@elmerwilliamson1970
Ай бұрын
OSHA would have a field day showing up here. They would levy enough fines to put all their kids through a machinist apprenticeship program!
@Manufacturingsite1
Ай бұрын
Nice work amazing my friend ❤
@igoranatolich
Ай бұрын
Весь пол усеян стружкой. Рабочие в открытих шлепанцах с голыми ногами. О ТБ никто не слышал это точно.
@HierNameneingeben
Ай бұрын
@9:00 I heare all the forged fibres of steel screeam at once in pain.
@Pakistani-Hands
Ай бұрын
Thanks for being here
@jesusarenas6623
Ай бұрын
Admiro la mecanica industrial. !😮😮
@Pakistani-Hands
Ай бұрын
Thanks for the love
@paulconrod4504
Ай бұрын
Awesome oxy cutter man
@Pakistani-Hands
Ай бұрын
Thanks for appreciation
@andymacdonald30
Ай бұрын
I see the cleaners have not visited for a while !
@Pakistani-Hands
Ай бұрын
Haha. Actually this man clean the workshop after single crank manufacturing.
@abowie1965
Ай бұрын
They're at lunch with the OH&S rep.
@CatNolara
Ай бұрын
Very fascinating work I wonder, I haven't seen any indicators or calipers in the whole video, how do you still achieve the needed precision?
@Pakistani-Hands
Ай бұрын
I am glad that you showed such interest in this video. Thank you. Actually, this man uses their specific measuring instrument for getting the precise position. But that is shown less in three video, may be you got skipped that part.
@brasildesconhecido
27 күн бұрын
Agora sim, vi um vídeo clássico e prático.
@singharjot86
26 күн бұрын
Amazing 👌🏽👌🏽👌🏽👌🏽
@mfs5493
Ай бұрын
How about sweeping up occasionally?
@DanieleT.820
Ай бұрын
On a crankshaft, measurements taken without at least a micrometer will soon cause the engine on which it will be installed, many problems... or at least a shorter life.
@Pakistani-Hands
Ай бұрын
This is agreed. But here this man manufacture crankshafts for different machines used in factories and mills and they had done it for more than 40 years and they got zero complaints up-till now. So these are experts in what they do and had got a super master skills. Also they do take measurements on different compasses and micrometers. There job would be incomplete without these measuring instruments. May be you have skipped that part of measurement of crankshaft in this video.
@alansharp307
Ай бұрын
Probably running on poured white metal bearing, blued and scrapped to the shaft
@nv1493
Ай бұрын
You don't need hi tech equipment to keep your shop from looking like a junkyard.
@Pakistani-Hands
Ай бұрын
Thanks for sharing your observations but this workshop owner make it swipe after one complete machining process.
@and9290
Ай бұрын
@@Pakistani-Handscomplete BS, the lathe was full of swarf before he even started.
@jwm6314
Ай бұрын
Lol I want to see you walk from your hotel to a Cafe in Pakistan without soiling yourself. You're spoiled. You're right, but the fact you made that comment means you know nothing of the world outside your sterile environment.
@hendrikvanleeuwen9110
29 күн бұрын
Lol, you think they only make one a day? Look at the actual bench faces and cutting heads, they are all in good condition and oiled, even I they are older than both of us put together. I would guess they are on per piece rate, so fluffing around to make yourself feel better is an expensive hobby when you could be knocking out the next part. Dont worry the swarf will be collected for scrap and in the crucible by the time these guys are having breakfast the next morning. @and9290
@antoinekhoury8735
Ай бұрын
Font un travail admirable et formidable. Chapeau bas
@Pakistani-Hands
Ай бұрын
Thank you brother. Thanks for the appreciation
@SW-qr8qe
Ай бұрын
I wonder how many times they have had a crank jump out of the lathe, especially when cutting those big end journals. The weld holding that flange at the tail ought to be , er more substantial !
@Pakistani-Hands
Ай бұрын
These men doing this job since years. But never happened that the crank jumped out of lathe machine, never ever.
@hswing11
Ай бұрын
LOOK AT ALL THE METAL SHAVING THE SHOP IS A PIG PEN AND THE EMPLOYEES WALKING AROUNG WEARING SANDALS
@HeinrichMotoren
Ай бұрын
He notado una falta de engrase en todas las fases de acabado , y aún así parece ser que éstos cigüeñales trabajan a bajas R.P.M.
@Jivi_vecno
Ай бұрын
Ну почему немцы никак не могут до этого додуматься? Дешевле было бы.
@Pakistani-Hands
Ай бұрын
Germans needs to hire such talented and multi skilled people
@user-uv9qp7uy5n
Ай бұрын
헤이딜러...차 사길때는 훨 기스니 뭐니 고무바킹 다보고 차 타면서 문짝 범버 교환 안해본 사람 몇이나 된다고 이거 빼고 저거 빼고 금액 확 후려놓고 팔때는 중고니까 이정도는 감수하시라고 하고...상사랑 뭔차이? 요즘 상사만 가도 사고내역 다나옴. 견적도 차이 거의 없음. 그냥 상사나 가까운 매장 가시는 걸 추천함!!
@louis-ok9gp
Ай бұрын
CES TOURS ONT PLUS DE 100 ANS , LUBRIFIIEZ L'OUTIL DE TEMPS EN TEMPS, SA VIE SERAS PLUS LONGUE
@Pakistani-Hands
Ай бұрын
Thank you brother and your suggestion will be considered for sure.
@terrybull1043
28 күн бұрын
This is how we treated people once now in Pakistan at some point they will rise up and say no hopefully 😢👍❤
@user-ic6so3uq3m
29 күн бұрын
Браво!!! 😃👍
@codyodyodyme6573
23 күн бұрын
Who brought in the white guy with the torch??
@jakepopalo
Ай бұрын
Все це робиться без часових індикаторів,мікрометрів,без подачі СОЖ і термічки.Ще й сплав невідомий марки ХЗ.Правда гаряча ковка заготовки присутня.😂 PS:статичне і динамічне балансування теж не проводять.Для парового двигуна згодиться.
@Pakistani-Hands
Ай бұрын
Seems like you have got good information regarding making of crankshafts. Here in this video the crankshaft is measured and a sketch was drawn before the process. This expert man use different types of measuring instruments during the manufacturing process of crankshaft. The supplying of coolant inside crankshaft takes another process and that is not covered in this video.
@user-gj9is1ql9b
Ай бұрын
Короче делают, как попало ... Им бы на Украину съездить, и поучиться как правильно термичеть ... 🤔
@user-id3ft6fq7o
Ай бұрын
Сталь как раз таки нормальной марки - они режут заготовки из колена от большого судового двигателя. А вот к технологии мехобработки есть вопросы. Но это колено скорее всего пойдёт на какую-нибудь водяную помпу или что-то подобное. Так что сойдёт...
@MrDriftspirit
Ай бұрын
10.20min.if the tough pulls back his foot, must be very hot! Bet the bar he put the foot on, have had more than 200 degrees ..
@giovannifinievoli8825
Ай бұрын
A great job well done. It should be cleaned on the ground 😁😁😁
@Pakistani-Hands
Ай бұрын
Yes, thanks
@unsafe_at_any_speed
Ай бұрын
It's like a train wreck. Hard to watch but impossible to turn away
@Pakistani-Hands
Ай бұрын
Thank you for sharing positive vibes.
@brenniek1
Ай бұрын
I guess precision is way overrated.
@mrkite1101
Ай бұрын
Wow Mechanics1
@Pakistani-Hands
Ай бұрын
Thanks for love
@e.o.v.versatil7370
Ай бұрын
Tirei o chapéu foi pra esse corte com oxiacetileno de uma chapa de mais de 15 cm
@Pakistani-Hands
Ай бұрын
Thank you brother for showing interest in our content. Hopefully you would like our upcoming videos too !😀
@user-lv8yw2hr9h
Ай бұрын
THANKIOUPR❤❤❤❤❤❤❤❤❤❤❤❤❤❤
@paulwilton735
Ай бұрын
These people are 100 years behind.
@dunnahmad1667
21 күн бұрын
Barokalloh for everybody
@peterhawkins4612
Ай бұрын
I thought I had it tough some of the places I have worked.
@user-ph2hb6rc8l
Ай бұрын
النظام أساس العمل .
@SW-qr8qe
Ай бұрын
I wonder how many times they have had a crank jump out of the lathe, especially when cutting those big end journals. The weld holding that flange at the tail ought to be , er more Sunday!
@andrewworrall9639
Ай бұрын
So they don't fancy balancing that crank 🤔
@itsamemario8014
Ай бұрын
Obviously cleaning up is never an option for this type.
@amixo1
Ай бұрын
Wielcy mistrzowie
@ianrenshaw6653
Ай бұрын
Great work thank you!
@Pakistani-Hands
Ай бұрын
Glad you liked it!
@philosoffer
Ай бұрын
Great work? Realy? XIX century.
@deaftodd
Ай бұрын
It looks very dangerous. The oxy ace guy was probably the smartest guy for wearing boots!
@Pakistani-Hands
Ай бұрын
Yes because that guy’s job was too dangerous without having shoes
@petergorniak7277
Ай бұрын
And what cannot be planed off is then polished with a grinder. It then fits better. And a candlestick as a dial gauge 😂😂 Neanderthal Men at work.
@Zedsdead83
Ай бұрын
Now off to get heat treated or induction hardened no doubt, wink wink.
@paulconrod4504
Ай бұрын
How can they walk around in sandals with all that swarf on the floor?
@Pakistani-Hands
Ай бұрын
They are practiced to it.
@robjaimiehickford4559
Ай бұрын
Ok result apart from lack of PPE, but theres no way that key is on TDC. Should clean up crank cheek faces in slotter prior to alignment of slotting keyway. And hows the drilling of the end of keyway in pedestal drill, wonky & on the piss.
@D-B-Cooper
Ай бұрын
Labor is cheap, why don’t you get the kid to shovel out the floor?
@Pakistani-Hands
Ай бұрын
You are right but the floor is shovelled after one complete session of machining.
@and9290
Ай бұрын
@@Pakistani-Handsstop saying that, it's not true.
@vizibug
Ай бұрын
walking around barefoot in piles of chips..? you got a lathe, but no boots?..
@Pakistani-Hands
Ай бұрын
These people got practiced to it and now they don’t take care of it. It is their daily routine. Else your suggestion could be considered
@juhavuorinen3945
Ай бұрын
Accuracy is not import
@Pakistani-Hands
Ай бұрын
Accuracy is their priority
@Manufacturingsite1
Ай бұрын
Kis city sy ho ap
@Pakistani-Hands
Ай бұрын
Kpk se
@MMiler
Ай бұрын
👏👏👏😎👏👏👏
@brianleduc2244
Ай бұрын
Glad thats not a crank shaft for my equipment!, THATS A Piece OF SHIT,!,,
@victimovtalent6036
Ай бұрын
Paint your wall much better🙂
@Pakistani-Hands
Ай бұрын
Your suggestion will be considered
@Mehanik419
Ай бұрын
Вокруг такая грязь, сами грязные,чумазые. И как вы думаете, может ли что-то нормальное выйти отсюда?. Не знаю...
@wladimircavalheirohenrique8275
Ай бұрын
Itens de segurança pessoal zero
@Pakistani-Hands
Ай бұрын
Your suggestion will be considered
@jameshaney4494
Ай бұрын
The criticism on workplace safety & PPE comes from those same people using phones wearing clothes made in the same environments.
@hayabasa7555
Ай бұрын
халтура
@user-gj9is1ql9b
Ай бұрын
Такие видео смотрят зачем? 🤔 Я серьёзно спрашиваю, зачем люди это смотрят. Зачем вы это посмотрели? Для чего...
@pavelferos2803
Ай бұрын
Как можно быть таким не понятливым, что б сделать коленвал ясен пень..... 🤨🤔
@Sole-mio-official
24 күн бұрын
Чтобы было понимание какой труд затрачивается при изготовлении таких деталей
Пікірлер: 133