Dang you really know your stuffs Inspirational! Like a damn sermon You Preachin' on here
@randyalmonte1431
7 ай бұрын
I’m about to do the same to my Maddog scooter. Thanks for the info dude very helpful.
@spikonn
2 күн бұрын
What Gear you suggest for 63mm bore kit with 4V and +8.2mm crankshaft ? Thank you !
@GhettoWrench
2 күн бұрын
I have no idea. Have to know what RPM you are currently running and then know what RPM you want to be at. From there you can figure out the percent of increase you need.
@spikonn
Күн бұрын
@@GhettoWrench I have 30mm Carb and I keep the RPM at 1900 - 2000 since that everyone recommends to keep it at that number.
@GhettoWrench
Күн бұрын
@spikonn I mean at full speed. What RPM? If you are not above 9000 RPM I doubt the gear up kit will make you faster
@GhettoWrench
Күн бұрын
@@spikonn This one prob explains it better: kzitem.info/news/bejne/palnrnyesl9olHosi=ob3eVfpzACJvHTM1
@JonahNAloha
3 ай бұрын
What gear do I need for a gy6 50cc? Lmk need for speed and torque.
@GhettoWrench
3 ай бұрын
Well gear down will give you torque and going up will give you speed, but only if you can currently hit redline. Every bike is going to be different. You would just have to try some. I have not tried gear changing a 50 yet
@lyleledford-hr3br
Ай бұрын
How fast does a typical mad dog? 150GY6 motor scooter go.
@GhettoWrench
Ай бұрын
Stock goes about 50mph. You can follow these videos and see what it takes to go faster. The free mods are probably the best. kzitem.info/news/bejne/lY6ZnWmJoaCidnosi=Xj0yvy9Dta2KowoQ
@frednetherlands887
Ай бұрын
Which app are you using? Thank you.
@GhettoWrench
24 күн бұрын
Called "Drag Racer" but the link is dead. Which is nice cause no ads.
@litobayabo5749
Ай бұрын
What gear set needed for a 125cc gy6
@GhettoWrench
Ай бұрын
I would not think any. No clue what's in there stock. Are you hitting redline? 9500 RPM. If so, do you already have a larger variator? That is the first gear up mod I would try.
@earlisfayette9061
5 ай бұрын
Ok I pretty much feel for the gimmick as u call it I spent right at 800$ with the dorbyworks Ankle biter kit with the ncy super Trans kit 2000 rpm contra spring and I got the rolling wrench gear up kit after install I whent from a factory top speed of 63 mph to 54 max after install was very pissed I put factory spring back in and now I can do 60 but I have to tuck down to get their so I guess my question is what all do u have down to achieve 70mph could really use some advice thanks in advance
@GhettoWrench
5 ай бұрын
You have geared that thing very tall with the gear kit and large variator. Imagine being on the highest gear on your bicycle. Your legs are not strong enough to pedal and go fast. I would imagine your RPMs are low (6000 to 7000) as you bike is struggling with that high gear. What have you done to the motor power wise to push that that high gearing? I have a 171 kit, Cam and 28mm PWK. I also used the (smallest amount) gear up kit.
@earlisfayette9061
5 ай бұрын
@@GhettoWrench I have the 150cc upgrade from cajun maddogs 26mm carburetor ,ncy ignition coil ,ncy cdi box that's it besides the Trans and cvt
@GhettoWrench
5 ай бұрын
@earlisfayette9061 so the NCY CDI is actually slower than the stock. I have videos proving that. The coil makes no difference on power. We don't have enough compression mods to need a bigger or hotter spark so spark is spark. The 26mm carb is an upgrade, but to what? You need a reason to need more fuel. More displacement or more RPMs or cam etc. Do an electric fuel pump and re-tune your carb, and you will notice a big difference. You may try putting the stock CDI back on and seeing which one you like better also. What RPMs are you running wide open?
@earlisfayette9061
5 ай бұрын
@@GhettoWrench 7000 rpm max
@earlisfayette9061
5 ай бұрын
@@GhettoWrench I was planing to order the electronic fuel pump and pulse from rollingwrench and a afr gage and a 172 big bore kit with cam and slide carb
@raso_i
Ай бұрын
15:55 everything reminds me of her...
@GhettoWrench
Ай бұрын
😆😆
@stewartrhaines
7 ай бұрын
Nice! What app are you using for your runs?
@GhettoWrench
7 ай бұрын
This one, bit I hear it is not working for download now play.google.com/store/apps/details?id=com.milejko.dragracer
@BIGSMOKE-bl2lq
7 ай бұрын
No idea why this was recommended but i pissed myself at the start THIS IS GONNA GET SERIOUS hahahaha yea on fucking china 150 lol
@GhettoWrench
7 ай бұрын
@BIGSMOKE-bl2lq ya these things are slow AF. My wife's moped is still faster. LOL
@stewartrhaines
7 ай бұрын
@tedowen409 Yea, it looks like it's for an older version of Android damn! Thanks though!
@SHARKPAPARRAZZI
6 ай бұрын
I want to know too
@lastresort1757
Ай бұрын
Damn and this is a fully stock 150cc?
@GhettoWrench
Ай бұрын
Not even. Look at other videos. Big Bore kit, Cam, 28mm PWK, big valve head etc .
@king0dasouf
4 ай бұрын
I tried it Went slower Ima big dude though
@GhettoWrench
4 ай бұрын
My buddy just went back to stock gears and went faster too. I have the very mildest gear up kit tho... only 14%. He had one of those more normal 20+% ones.
@rodgercgreen411
3 ай бұрын
It's a moped not a motorcycle you want motorcycle power go by motorcycle you want to get around town cheap go get a scooter
@GhettoWrench
3 ай бұрын
LMAO. I actually have a pretty solid background in built liter race bikes. You are correct tho. It's Def a moped.. just with the plastics off. Most my posts say scooter. I'm old and prob got confused.
Пікірлер: 39