The dick puns at the beginning made me chuckle. Lol
@KaijuDaddyJapan
Жыл бұрын
Thanks for checking it out.
@nineteenninetyfour
Жыл бұрын
Finally!! Been waiting to see someones in hand reviews/photos and you’re the first one!! Great review.
@KaijuDaddyJapan
Жыл бұрын
Thanks for checking out the video!
@DaffyDuck345
Жыл бұрын
Yo awesome vid!one question where did you get him?
@KaijuDaddyJapan
Жыл бұрын
Thanks. I got it at a shop in Akihabara called Uchusen.
@ICollectToys
Жыл бұрын
Awesome as always Kaiju Daddy! I am planning on grabbing this figure through BBTS
@KaijuDaddyJapan
Жыл бұрын
Thanks Indy!
@thunderfeet
Жыл бұрын
Might have to wait a while.
@KaijuDaddyJapan
Жыл бұрын
@@thunderfeet patience is a virtue
@thunderfeet
Жыл бұрын
@@KaijuDaddyJapan amen to that, but you might what to consider an import site. Much cheaper and faster. My 3 Nightwings are arriving on Monday and only cost £75 each including postage. The site I use is Amiami but there are lots out there and you only pay once they are in stock. It’s scary at the beginning but once you see how easy it is I think you’ll like it. Hope you are well
@dorothygale8984
Жыл бұрын
Great review! Thanks for the video
@KaijuDaddyJapan
Жыл бұрын
Always appreciate the support!
@WhiteFieldl11l
Жыл бұрын
You didn’t push the articulation to the limit in this vid right ?
@KaijuDaddyJapan
Жыл бұрын
That is correct. I wasn’t gentle with trying to move the joints but I also wasn’t about to have it break on me either.
@WhiteFieldl11l
Жыл бұрын
@@KaijuDaddyJapan I see so does mafex very easy to break ? I mean the joint
@KaijuDaddyJapan
Жыл бұрын
Mafex quality control isn’t anywhere near the same level as Tamashii Nations has for their Figuarts figures. I’ve had a few Mafex figures break on me by trying to push the articulation a bit. I’m not interested in seeing how far my figure will go until it breaks. This figure, I tried moving the legs like the other figures from Mafex but they weren’t moving anywhere near where previous figures had. So that’s either the result of extremely tight joints or engineering. I figured it was the engineering.
@WhiteFieldl11l
Жыл бұрын
@@KaijuDaddyJapan Thx for such detailed explanation I wish you good luck and keep up the good work !
@KaijuDaddyJapan
Жыл бұрын
@@WhiteFieldl11l thank you
@Nathan93Baker
Жыл бұрын
Nice review. Thought you had arcade carpet but no it's a table mat.😔
@KaijuDaddyJapan
Жыл бұрын
Thanks! Yes those are from New Wave Toys. They’re reproductions of the arcade carpets and are awesome under a black light.
@teddy.g.coastmusic
Жыл бұрын
Meh... I'll still get it. This is supposed to be my first Nightwing figure because i only want one thats super posable...this wasn't what i was expecting but its probably the closest im going to get when i comes to my ideal Nightwing figure.
@KaijuDaddyJapan
Жыл бұрын
Same. Was really hoping this would be it but oh well
@Saiyan1229
Жыл бұрын
Have you seen more pics of it? Its a lot more poseable than this review made him seem. Super excited to get it
@KaijuDaddyJapan
Жыл бұрын
My joints must have been ridiculously tight because there was no give at all on the leg at the waist. The arms and shoulders are fine as is the neck and head. But the legs and torso left much to be desired for me.
@lealynlizardo4359
Жыл бұрын
@@KaijuDaddyJapani think yours have tight joints cuz D amazing night wing his joints have a really smooth articulation look at his video its new. Put it in hot water
@LoganSaunders15
Жыл бұрын
How did you get this early
@KaijuDaddyJapan
Жыл бұрын
Thanks for checking out the video. I got it on the release day in Japan.
@nicholasgoku4747
Жыл бұрын
Figure of the year maybe great review do u know where to get him from with fast shipping
@KaijuDaddyJapan
Жыл бұрын
Thanks for checking out the video. I think HLJ or AmiAmi using DHL is what most collectors outside Japan would say.
@insaneone1942
Жыл бұрын
Thanks for the review.
@KaijuDaddyJapan
Жыл бұрын
Thank you for being a friend.
@eduardolamboy4776
Жыл бұрын
They're Escrima sticks I believe, not Batons.
@KaijuDaddyJapan
Жыл бұрын
Thanks
@danielcraig9666
Жыл бұрын
The most recent Cyclops did not have paint bleeding. That was paint shading. It was consistent across the knuckles and in the palms on all of the white molded hands and around the edges of white molded shoes too.
@KaijuDaddyJapan
Жыл бұрын
Aside from the shading which was horrible, there was definitely bleeding going on as well.
@spoodurmin9742
Жыл бұрын
No there definitely was bleeding too
@danielcraig9666
Жыл бұрын
@@KaijuDaddyJapan I see no bleeding.
@trembledust6819
Жыл бұрын
Odd no thigh cut. Im thinking its cause they didnt want to break up the leg sculpt but clearly they did it w/ Storm and his lower portion is all black so...huh? Thanks for vid.
@Saiyan1229
Жыл бұрын
They rarely ever do thigh cuts. Most of the time its cause theres a cut from design. Otherwise its never there
@trembledust6819
Жыл бұрын
@@Saiyan1229 You're right. Storm doesnt even have a thigh cut. My fault. Thanks. Although some type of cut for a fig as agile as Nightwing would of been cool. Maybe at the top of the boot if you didn't want to break up the leg sculpts.
@Saiyan1229
Жыл бұрын
@@trembledust6819i think the only time they did a thigh cut was on the mafex hush huntress. But i may be wrong and they did it on another. But i do know mafex doesnt do it usually
@KaijuDaddyJapan
Жыл бұрын
I agree that this figure really could have used either a thigh cut or boot cut for some better articulation options.
@epiclvlpurple19
Жыл бұрын
With Mafex they don’t do a traditional thigh cut like say ML. They have inner twist on the ball joint that gives its thigh rotation. This is how all Mafex figures work except the recently released Huntress but she had the biker shorts look so it made sense there and didn’t break break up the sculpt. I’m absolutely certain this Nightwing has the same setup and it just may be stuck on his copy so I wouldn’t worry about that too much.
@muertosdetumare
Жыл бұрын
Figure of the year? until Thor shows up...
@KaijuDaddyJapan
Жыл бұрын
I personally think Storm is a much better figure/release than this one.
@Dog.01
Жыл бұрын
I cannot wait for Thor and Magneto.
@KaijuDaddyJapan
Жыл бұрын
I’m really looking forward to them as well. Magneto, Steel, and Cyborg should be in 2 weeks and Thor should be about a week later. I’ll definitely be reviewing Magneto and Thor.
@jegetasaiyan7326
Жыл бұрын
Idk if any of you guys got their X-Force Deadpool but that’s a great figure even without the guns. But looking forward to this, Thor, Magneto & Scarlet Spider-Man
@Dog.01
Жыл бұрын
@@jegetasaiyan7326 I really wish they would rerelease of a red and black Deadpool.
@I-own-your-feelings
Жыл бұрын
Not too impressed honestly.
@KaijuDaddyJapan
Жыл бұрын
Same here. Was expecting more.
@I-own-your-feelings
Жыл бұрын
The faces are so pale and bland. His articulation is average. He's able to combine the sticks into a bo in the comics. Doesn't look like the figure can. No electric effects for the escrima sticks. No grappling gun. No wing dings (his batarang). Most people will cope because it's the best 1/12 NW, but mafex could've done more at this price. Not everyone values their money though, so I understand the excuses.
Пікірлер: 59