Magnet Glass Seal has been designed after deep R&D and laboratory tests in order to provide a better Outlook to the balconies, while providing better insulation as well.
The gap between two glass panes is exactly filled with seal so that it does not disturb the eye and makes the balcony look stylish. Magnet Glass Seal can be applied either t oflat balconies or balconies with angles.
Adhesive tape used behind the seal is supplied by 3M solutions company and the product has a total 10 years of lifetime in the balcony.
Preparing for Application
• Place of application must be over 10 degrees celsius.
• Side of the glass must be clean and dry.
• BKS Glass Cleaner must be applied.
Application
1. The plug of BKS Glass Cleaner is removed and applied to the side of the glass in the same direction. It takes 3-4 minutes to become dry.
2. The liner of the adhesive is carefully removed from the beginning and attached to the glass.
3. While the liner is removed, the seal is assembled to the glass with the Glass Seal Assembly equipment. It is important not tol et any material touch the adhesive tape.
4. Bulge and dent of the glass seal must be taken into account when assembling.
5. When assembling the seal to outlet pane, bulge and dent of the seal should be paid attention so that the panel can be opened.
6. The seal is cut in the ending point.
Негізгі бет Magnet Seal Installation
Пікірлер: 2