Thank you. I just got this keyboard, and it sounds a lot different than the pre production unit you have in this video. The rapid trigger helps in Overwatch. I might have to give this mod a go.
@JakeReevesVideo
Жыл бұрын
I hope the mod works well for you too! I found it cut the echo and hollowness quite a bit - but the magnetic switches are pretty handy for tuning responsiveness ✌️
@sullit1559
Ай бұрын
try foam in the spacebar greatly improves sounds
@TwitchVanishlol
Жыл бұрын
Can you do a video trying the wooting lekker hall effect linear switches in this keyboard
@WalkMrJ
Жыл бұрын
All that foam and all that effort for no difference in sound.
@ghosty874
7 ай бұрын
☝️🤓
@whoaitstiger
6 ай бұрын
I thought this too, so I gave him the benefit of the doubt and modded mine. It is actually a bit nicer sounding, maybe the mic didn't pick up the difference so well.
@yanzi1957
10 ай бұрын
Just ordered one of these and I will definitely try this mod. I like the fact that I can use the materials in the box, really smart thinking. I am new to the keyboard world and you make this video simple and easy to understand. Edit: Why did you put take around the outside of the keyboard case?
@JakeReevesVideo
10 ай бұрын
Thanks, I hope you enjoy it. The tape on the outside of the keyboard case acts as a force break - it prevents vibrations from transferring easily between the bottom and top of the case, in effect helping to dampen out some resonance ✌️
@yanzi1957
10 ай бұрын
@@JakeReevesVideo gotcha, thanks!
@valthor9381
11 ай бұрын
Neat review! I picked this keyboard up recently and love it! I was looking into some keycap options and know people tend to say that cherry profile caps haver interference with north-facing LED switches which this board does feature. Should I avoid that profile for this reason? Also, it appears that the "Enable secondary sensitivity" option in the software has been removed, unless it is relocated somewhere and I didn't see it.
@JakeReevesVideo
11 ай бұрын
If you’re worried about Cherry interference with north facing LEDs, the most similar profile would be OEM - Cherry-like sculpting but taller.
@coyotex850
9 ай бұрын
do you know if this is compatible with gateron and other HE switches or does it only work with drunkdeer's own switches?
@JakeReevesVideo
9 ай бұрын
I'm not certain, but I suspect it would eb compatible with the others - Can't say I have yet tried the Gateron HE switches though
@orchestertan123
Жыл бұрын
How did you open the board? Does it have screws? Or you just need a pry tool?
@JakeReevesVideo
Жыл бұрын
I used a guitar pick - you need to wedge something into the crack in the backside of the case and carefully pry it open just enough that the inner clips unlatch on the case. Be careful, but it is doable 👍
@vonaddison843
Жыл бұрын
Hi great vid! If you don't mind. May I ask how were you able to take the knob off? I went to the drunkdeer website says that the knob should be remove first.
@JakeReevesVideo
Жыл бұрын
You have to loosen the set-screw on the side of the knob I believe. It will require a small Allen key to loosen.
@torr4334
6 ай бұрын
Is there any available aluminum case to replace the housing of this keyboard?
@dreammie_eiei
Жыл бұрын
Does Rapid Trigger mode need to run on the software at all times?
@aleksandrmikhailov3255
8 ай бұрын
No
@aleksandrmikhailov3255
8 ай бұрын
Is it possible to remove the knob? I pull really hard but its not moving... Also would be great to see how to lube the stabilizers, cause they're really bad from the box.
@JakeReevesVideo
8 ай бұрын
The knob would have to be unsoldered from the PCB, it isn’t hot swappable.
@mickaeldu2385
7 ай бұрын
Hello , Would it be possible to give me the software link for the keyboard? THANKS
@nimboose_
8 ай бұрын
hello! awesome video plan on doing this when my keyboard comes in, i dont know much abt customizing keyboards, but since it has i think "magnetic" switches do i have to get other magnetic switches? i love silent keyboards and am wondering which switches i will need? thanks a ton!
@JakeReevesVideo
8 ай бұрын
Thanks for the comment - yes, you will need magnetic switches if you’re going to swap out these ones. Look for something that is branded as either magnetic or Hall Effect 👍 This keyboard doesn’t have the hot swap socket attachments to receive standard mechanical keyboard pins, so magnetic switches are necessary ✌️
@nimboose_
8 ай бұрын
@@JakeReevesVideo thanks so much!
@kibb33
9 ай бұрын
DrunkDeer have hotswap? I think he not...
@JakeReevesVideo
9 ай бұрын
Yes, it is hot-swappable, but you have to use Hall-Effect switches, so switches are limited.
@Tijke
9 ай бұрын
It appears that your code no longer works at checkout
@MaxDetaLGaplevski
11 ай бұрын
Can you please tell me where I can buy these magnetic switches?
@shrunkspider6226
2 ай бұрын
It comes with the keyboard
@doominance
4 ай бұрын
Will it destroy the switch when you lube it?
@anplayg6435
9 ай бұрын
What's the spring force of this switches?
@00dreamer00
Жыл бұрын
What's the palm rest that you're using
@JakeReevesVideo
Жыл бұрын
That’s the Keychron wooden palm rest - you can find a link and affiliate discount via my LinkTree in the description (if you’re in Canada).
@FrostyLXIV
9 ай бұрын
How did you open up this keyboard?
@JakeReevesVideo
8 ай бұрын
You have to stick something slim through the gap around the periphery of the underside. There are small internal shelves that keep it in place - be careful not to crack the plastic 👍
@doominance
4 ай бұрын
C l A c K y
@hansjeremyreyes784
Жыл бұрын
How do you mod it tho?
@JakeReevesVideo
Жыл бұрын
I predominately modified it by way of foaming the interior to reduce the sharp case-ping and applying a Tempest tape mod to the backside of the PCB.
@hansjeremyreyes784
Жыл бұрын
Oh sorry, I’m talking about like removing the screws and stuff
@JakeReevesVideo
Жыл бұрын
Not many screws to remove - to get into the case, you have to wedge something thin between the top and bottom case in the small crack around the outside on the underside of the case. It is a press-fit snap lock system rather than a screw enclosure. I hope this helps 👍
@hansjeremyreyes784
Жыл бұрын
Thanks, but nevermind it’s hopeless HAHA
@mrdawgey
Жыл бұрын
@@JakeReevesVideo Are you please able to make a short on it, there are no videos on youtube currently for this
@Michele130
Жыл бұрын
Contact for 100 likes 300 comments
@jorge-ormeno
Жыл бұрын
Is it QMK/VIA compatible? If not, can you remap the CapsLock key to Fn key?
@JakeReevesVideo
Жыл бұрын
Not QMK/VIA compatible, but it does have its own proprietary remapping software that can handle that 👍
Пікірлер: 48