Hallo I have Et. Cycle F720 from Germany.it has a Das Kit c7. but with my Das kit C7 I cannot change the settings (especially I cannot change the speed settings for my throttle) . if I buy Das kit c6BBT or Das kit c7BBT will it work with my ebike. Please let me know.
@FSX239
Жыл бұрын
Any instructions out there on how to remove the 28 mph speed limit?
@rishabhkumarmotovlog2534
6 ай бұрын
where i will find the password for my milano plus. is it also written on the bike or battery
@robhi3518
Жыл бұрын
Hey, how can i actually open that computer ? On the back there are 4 screws, after unscrewing them i still can't open the case. I need to change one cable. Please help
@riverdream6630
2 жыл бұрын
I just found this thread and I think the sematics of the word "power" is "torque" where I come from. Same top speed (1-6) but get there faster or slower.
@DavidDucrot
4 жыл бұрын
Great ! I've upgraded my bike ! Many thanks !!!
@arieszander2042
3 жыл бұрын
i know Im randomly asking but does any of you know of a method to log back into an Instagram account? I was stupid lost my account password. I appreciate any assistance you can offer me!
@julioty1735
3 жыл бұрын
@Aries Zander Instablaster :)
@arieszander2042
3 жыл бұрын
@Julio Ty I really appreciate your reply. I got to the site thru google and im in the hacking process now. Takes quite some time so I will reply here later with my results.
@arieszander2042
3 жыл бұрын
@Julio Ty It did the trick and I finally got access to my account again. I'm so happy:D Thank you so much, you saved my ass :D
@julioty1735
3 жыл бұрын
@Aries Zander Happy to help :D
@blahhblahh1511
8 ай бұрын
Could you tell me tire setting for the aspen plus please TIA
@ibrooksie
7 жыл бұрын
YES! Cory rules! -Spencer from High Country.
@uglyrony
Жыл бұрын
Hi guys i have a question i have the NCM C5 (das kit x2) i would like to upgrade my bike with this das kit c7 do you think it is possible on google i didn't find any answers whatever i just want to put a display screen on my bike and remove the speed limit if someone can help me thank you guys
@jacobl777
7 жыл бұрын
There are 3 modes: Power/Normal/Eco. However, when you set the mode, the "Power" on the upper left of the C7 display is the bike power. This confused me for a while because I was experimenting with changing the mode to normal or eco, but I thought it was never changing. The mode does in fact change, so the display is not displaying the mode in the upper left, but the bike's actual "Power".
@patbynum1399
5 жыл бұрын
I changed from Power to Normal and Eco but my pedal assist and throttle seem to be responding as if I were still in Power mode. Basicially, I am trying to slow down my speed a little. When I ride with non-electric partners thy cannot keep up with me even when I stay in PA1. I constantly have to stop pedaling and coast so thy can catch up. I love it but would like to try the other power modes.
@itornell
5 жыл бұрын
How do I set my display to "0" for the default PAS? I printed the PDF for my Magnum Premium Folding Step-through and and it says I should be able to. However, when I try, it only offers choices 1 - 6. There is too much thrust starting up with PAS 1. When I'm biking with others there's going to be a collision someday.
@NatureOfCoffeeness
2 жыл бұрын
Do you get a solution?
@luckimunich
6 жыл бұрын
How can I use % instead of Voltage on the screen? I would prefere the remaining percentage of thr battery...
@Moriconilo
4 жыл бұрын
Same question here! Could you figured it out after 2 years? 😂
@robhi3518
Жыл бұрын
? I am interested too
@danaharlan12
6 жыл бұрын
this 8036 or 8088 will not chang to MPH on my new 27.5 C-7 Das-Kit
@ykayman
6 жыл бұрын
Dana Harlan there are a few different software versions for this display. To get more complete directions for your model you can reach out to magnum bikes support team with the exact bike model and year purchased support@magnumbikes.com
@nonesame9122
4 жыл бұрын
I'm reaching out to them as I speak. they obviously don't wantvwarranty litigation and therefore don't want you overampung the motor. I explained that I have no standing for a warranty claim because I've already modified the wiring inside the controller box adding a relay for secondary battery. therefore come off the info.
@vMaor
3 жыл бұрын
is not working for me in prees + - and nothing happend
@Azallelnamme
2 жыл бұрын
Hey bro my display has no Km displayed. Any ideas?
@MagnumBikes
2 жыл бұрын
The unit of measurement can be changed in the display settings. Please contact our customer support if you need help changing your settings. (323) 375-2666.
@darylogle6696
2 жыл бұрын
HOW DO YOU HOOK IT UP TO YOUR BIKE
@MagnumBikes
2 жыл бұрын
If you purchase your Magnum bike in-store the display should already be installed. If you are assembling it out of the box you should refer to our manuals and assembly videos on how to properly install your display. If you still have trouble, please contact our customer support at 323-375-2666
@Brauni2705
5 жыл бұрын
Hallo Wie kann ich beim C7 Display die Max Geschwindigkeit von 25 Kmh aufheben? Mit dem Code 8007 kann ich nur die Radgröße ändern auf 20 / 200 das bringt aber nicht viel..... Und in ein anderes Menü komme ich nicht??? Mfg und vielen Dank
@mohammadalsruji1777
4 жыл бұрын
Hast du schon schnell gemacht?
@ahmedeid5926
2 жыл бұрын
Ich auch habe das kit c7 Display und kann ich nicht P und halb H sehen mit Daumengas nur 6 khm und 25 khm fahren. Das kit c6BBT or Das kit c7BBT Display ist passt für meine Fatbike Et. Cycle F720?was haben sie mit das kit c7 Display gemacht
@UrBxrger
Жыл бұрын
I have an et cycle and there is two types of displays one with throttle and one without. In my menu with code 8088 I can set my speed to 32 or even 45kmh but it stops assisting at 32. I can also set throttle to 6, 20 or 32kmh
@KuRiXY
5 жыл бұрын
Thanks for the video. Is it not possible to change the power mode while riding? That's really a shame... cannot believe it. That's the basic operation of any electric bike to adapt in real time to different level conditions.
@MagnumBikes
5 жыл бұрын
Thanks for your interest. The display has 6 levels of power that can be adjusted while riding depending on the needs of the rider. The overall power modes adjust the range of power the rider can expect to use throughout the course of his ride. When in eco mode for example the levels 1-6 will all put out less power. If the rider is less aggressive he might choose this mode but it isn't something that should be adjusted while riding. Only the power levels should be adjusted to adapt to the riding conditions.
@KuRiXY
5 жыл бұрын
Thanks! I thought the 6 levels were "speed levels" and not "power levels". am I wrong? Regards!
@tannercorlett3917
3 жыл бұрын
@@KuRiXY is lowers down power a tad bit but mostly just quits the electric assist off at a lower mph
@softlk8810
4 жыл бұрын
What's the code for the Magnum Premium Classic Folder 2020? Doesn't seem to work for this bike. I know this vid is from 2017.
@softlk8810
4 жыл бұрын
Code is 8018. But there is an additional code to Max the throttle at 28. Anyone know it?
@LowDucky.
3 жыл бұрын
8088
@nehoraynuni9065
6 жыл бұрын
does it make the bike go faster?
@ahmedk6207
6 жыл бұрын
this is what im here for. I noticed something when at the begining when he said ALL OF THESE STUFF WE ARE NOT GONNA MESS WITH IT IS actually what you wanna mess with to get higher speed but lets ask them in case
@Idovolff1
6 жыл бұрын
Yes
@philipbontekoe4250
6 жыл бұрын
@@ahmedk6207 did you try to make it go faster ?
@timothybarrd.c.185
2 жыл бұрын
? you didn't change anything?
@n2dmud
3 жыл бұрын
Anyone know the code for Pathfinder?
@sulemanjaved7148
5 жыл бұрын
I forgot my password for c7, what's the reset option,
@mohammadalsruji1777
4 жыл бұрын
do you find it?
@tailaihaha
4 жыл бұрын
@@mohammadalsruji1777 its 8018 yw :)
@darkworld9850
4 жыл бұрын
8018 but changing the tires size or power option does nothing to increase the speed past 35kmh
@leerjet18
5 жыл бұрын
Does anyone know how to zero the trip meter ?
@brucea3938
4 жыл бұрын
Yes. Go to Trip 1 using the SET button. Hold down the SET button for 5 seconds to reset Trip 1 to zero.
@ibrooksie
5 жыл бұрын
L7 next!
@GBgrenade
5 жыл бұрын
Das-Kit L7 password: 8018... unfortunately cant change the speed limit on that one :(
@GBgrenade
4 жыл бұрын
@Raf go downhill
@veronikabalazova3184
7 жыл бұрын
Please Do you know the password for C6 display?
@magnumbikesproductsupport9225
7 жыл бұрын
for that display the set button is pressed for 2 seconds
@superx9619
4 жыл бұрын
8018
@superx9619
4 жыл бұрын
8018
@jacobl777
7 жыл бұрын
What is the "P" setting and the "Half H" setting do? When I go through the configuration on my Magnum Metro Plus, they read 0 and 20 respectively. Also, can the mode be change from power to normal or to eco?
@magnumbikesproductsupport9225
7 жыл бұрын
they are to configure the bicycle for European market. yes the mode can be changed
@jacobl777
7 жыл бұрын
The half H is actually more of a sideways T, and it stands for throttle. The P for Power is the pedal assist power. This is information that I got from Magnum Bike's customer service.
@christoole1664
4 жыл бұрын
Jacob Larsen do you know if there is a way to change a setting on the UI6 for how fast the power from the motor is applied to the rear wheel once pedaling has begun? The bike I rode accelerated abruptly once pedaling began, even on the lowest pedal assist setting. I’ve rode several ebikes and never had one act like that. Thanks for your time. Chris
@riverdream6630
2 жыл бұрын
@@christoole1664 I just found this thread and I think the sematics of the word "power" is "torque" where I come from. Same top speed (1-6) but get there faster or slower.
@christoole1664
2 жыл бұрын
@@riverdream6630 sounds reasonable. Thanks for the explanation.
@stevecampbellera
4 жыл бұрын
I need the password for C-6
@coloradowing8518
3 жыл бұрын
8018
@jaroslavkrejci5116
7 жыл бұрын
Hello I have used the procedure and the password 8306 doesn´t work? I have a big problem now, the engine doesn´t respond to the pedal rotation ! The engine doesn´t work. Does anyone know how to solve this problem? Thanks very much
@magnumbikesproductsupport9225
7 жыл бұрын
please email support@magnumbikes.com
@AtiRanzuglia
6 жыл бұрын
Hi there, did you find the right password? Thanks
@philipbontekoe4250
6 жыл бұрын
To do a reset to factory settings 8888 That should work
@UrBxrger
Жыл бұрын
8088
@UrBxrger
Жыл бұрын
That's on f720 et cycle
@linktuner
5 жыл бұрын
What code for the L6 display?
@nonesame9122
4 жыл бұрын
mine is 8018 but it's limited. can't access max speed control
@johnmorgan6997
2 жыл бұрын
What if password 8306 doesn't work
@nunyabusiness4226
Жыл бұрын
Try 8018
@4LxJ4Ir
7 ай бұрын
@@nunyabusiness4226 but you cant change the speed limit
@nunyabusiness4226
Жыл бұрын
The code for my 2022 NCM Moscow Plus is 8018
@peerhebing3683
6 жыл бұрын
Is that C7 display available as spare spart ? Would like to have this version cause the german version is different ;)
@steveseifert5016
6 жыл бұрын
Peer Hebing das Display ist nicht different, das gibt es halt in de auch nur in der Plus version
@peerhebing3683
6 жыл бұрын
Welche Plus Version? Ich hab das Magnum Peak ( in D heißt das NCM Moscow+) . Da kann man leider nicht das H (28.1) einstellen ;) Ist fest auf 25 km/h.
@steveseifert5016
6 жыл бұрын
Du kannst aber den reifen auf 20 zoll stellen, dann unterstützt das fahrrad bis 35
@steveseifert5016
5 жыл бұрын
@South Tyrol Hans das war vor 10 Monaten, kann dir da nicht mehr weiterhelfen
@Idovolff1
6 жыл бұрын
New password is 8088
@MinerMends
6 жыл бұрын
Ido Volff hey bro just bought it today. How to make it go 28mph. Allnit gives me is 0 to 21mph. I set max to 28 and throttle doesnt work and i cant get it to 28
@magnumbikesproductsupport9225
6 жыл бұрын
this is because you are setting the wrong limit
@MinerMends
6 жыл бұрын
Support well i got it to go 25 average on peddle assist but throttle gets 22mph. 28 mph is bs. I got it to 50mph down hill yho xd
Пікірлер: 104