I just realized after having it for more than a year and a half that you can move that riser back. Extend the Zhukov stock and you move the riser towards the back. You don’t have to use both notches on the stock you can just use one notch and it’s very sturdy and now it makes sense.
@Feldmutze
Жыл бұрын
That's a good idea. For me that would extend the stock way too far out and would mess up my length of pull, but if it works at that length for you then that's a good option for the cheek riser.
@EOTechN9ne
Жыл бұрын
Nice to see a more recent review of this stock. That AK looks great.
@Feldmutze
Жыл бұрын
Thank you, and thanks for watching! I've noticed there's not too many recent reviews, and it does seem like Magpul's mounting hardware quality has improved compared to what I've heard on some of the older reviews.
@gunterstraus606
Жыл бұрын
I find it funny how much the revised AK-12 stock resembles a Magpul Zhukov directly installed through the receiver hinge.
@Feldmutze
Жыл бұрын
Agreed! If I remember correctly I read the Magpul Zhukov stock was originally based off the original AK-12 prototype stock. Then, the production AK-12 switched to the buffer tube type, but now is back to a simiar design to the prototype, which also more closely resembles the Zhukov, so the design kinda diverged and came back together which is interesting.
@Dragunov38
Жыл бұрын
As always, excellent review Jang. This is what I also have on my SGL 31-68... I seen hate on other sources about this stock. However IMO, this is an excellent choice, specially if its intended for a home-defense application. The material and craftsmanship is more than adequate. If its good enough for Rob at AK union and some operators currently in the Ukraine conflict, its worth the price ticket.
@Feldmutze
Жыл бұрын
Thanks for watching and commenting! I saw quite a few negative reviews on this stock myself, but this stock is definitely one of the better ones out there.
@thedumbguncollector5546
Жыл бұрын
Excellent review
@Feldmutze
Жыл бұрын
Thank you!
@GldenRetriever
11 ай бұрын
My biggest pro of the right side folding (and why I prefer it over others) is it makes it more compact as you still have the charging handle on that side sticking out. And for lefties, the charging handle doesn't stab you in the back or chest every step.
@Feldmutze
11 ай бұрын
That's a good point, it's a tradeoff either way but definitely some good reasons to prefer right-side folding that you mentioned.
@JaayGraam
8 ай бұрын
I took some of the play out of mine by pulling the stock completely out and putting duct tape in a couple places to tighten it. The one my brother had when the zhukov first came out actually had less play stock. I was surprised when I got this one recently, that it had that much.
@justsomeguy3931
Жыл бұрын
Great info and a thorough review, thanks for sharing
@Feldmutze
Жыл бұрын
Thanks for watching!
@john-sutton-tn
Жыл бұрын
BEAUTIFUL AK!!!! I would be interested in knowing about the front chassis system on the FDE AK. Impressive.
@Feldmutze
Жыл бұрын
Thank you! The chassis is a Sureshot USA MK2.1. I’ve actually done a few videos on it already that I’ve linked below if you’re interested in more information on it. Installation, First Impressions: kzitem.info/news/bejne/pHqJk6J_rIhjooIsi=K8IljsFMZUOPPU1D First Review: kzitem.info/news/bejne/sG-cwH-LsH5mmagsi=OXC4XIFO_JRah-Xp Six-Month Review: kzitem.info/news/bejne/xK2wuZ1noGKLdYosi=TocIh4par9CqZf66
@Grooove_e
9 ай бұрын
Thanks for the review, just got one of these for my Saiga 308 and its very nice even for a polymer stock. I dont currently have a cheek riser on mine. I run a Vortex Strike Eagle 1-6x on Midwest industries side rail scope mount and the cheek weld feels pretty good. I might order all the different cheek risers just to experiement with anyways, I'm not really worried about needing to shoot with the stock folded considering is 308 lol.
@WestWood_M
29 күн бұрын
WOW, Great..!!
@GldenRetriever
11 ай бұрын
If no one mentioned it and if you weren't aware, there are pistol grip plates that have sling loops. Most of them are clip style and not a full pass through like what you see on the back of the zhukov. Also blueforce gear has wire sling loops for your sling, which quiets it down.
@Feldmutze
11 ай бұрын
I've seen the pistol grip plates before. I've never really liked them as they get in the way of my hand when I'm firing. I use the Blue Force Gear ULoop for my front sling attachment. Those are great and very quiet.
@monkeyman7
Жыл бұрын
Awesome paint job. Did you paint the stock and chassis? Or did you just match it all? Thanks
@Feldmutze
Жыл бұрын
Thanks! I just matched it. The stock is FDE polymer, and I had the chassis cerakoted in FDE directly from Sureshot.
@ervingritzeriii1360
Жыл бұрын
I'm not a fan of plastic, but Magpul did their best with it.
@TheYouTubeMechanic
Жыл бұрын
holy national match flash hider
@TheMoistestNugget
4 ай бұрын
I wish they’d make this for regular side folders
@Kai-ky6tf
Жыл бұрын
Really liking the way the rifle is turning out. Any plans to add a WML?
@Feldmutze
Жыл бұрын
Thanks! I'm actually not planning on putting a dedicated WML on this rifle as I intend to use this as a practice/training AK so I can conserve my SLR-104 and 5.45 ammo better, since that SLR is my home defense rifle currently. If the SLR goes down for whatever reason I'll move the light from that rifle to this one.
@foshizzlfizzl
Жыл бұрын
Hey there. It's pronounced Shoekov, not Zookov. Just like the Admiral Georgy Zhukov from WW2. I like this thing a lot, it definitely influenced the latest AK but stock, which came with the AK-19 (AK-12 Update). Would be interested in a comparison of both and what the quality difference is. Thanks for this video.
@Feldmutze
Жыл бұрын
Thanks for watching and pointing out the correct pronunciation! I'll keep that in mind. As for the AK-19 stock, I don't have one on-hand as they're quite expensive (usually around $400-$500), and I don't have any rifles they would fit. The AK-19 stock only fits 5.5mm side-folding hinges, and my side-folder is a 4.5mm. But they do seem quite interesting, and if I ever get the chance to get my hands on one, I'll definitely make a video on it.
@foshizzlfizzl
Жыл бұрын
@@Feldmutze Yes. Also the latest AK modernization got a adjustable cheek riser aswell. Thanks for the info about different pin diameter, didn't know that. But we don't get this magpul but stock here, at least I haven't seen it so far. Greetings from mother Russia.
@elijahdowns6142
Жыл бұрын
Nice video. When you posted on the screen you had about 800 rounds through that rifle since you added the stock it made me think. Because of ammo prices I try to stock up when I got extra money and I also ration my ammo. Right I limit myself to 120 rounds of rifle and 100 rounds of pistol ammo per range trip to keep consumption down. Of course I’d like to be doing more but daily dry fire keeps me sharp. Do you ration your ammo ? What kind of ammo procuring routine do you have?
@Feldmutze
Жыл бұрын
Thanks for watching! I usually do a very similar rationing process where I take ~60-120 rounds of rifle ammo loaded in magazines. The exact amount I take depends on the rifle I'm shooting, I usually take a smaller amount of 5.45 since it's harder to get now, but if I'm taking a 5.56/7.62 x 39 I'll take 120, occasionally a bit more. For pistol I usually take around 50-100 rounds. As for my routine for procuring ammo, I have several ammo cans I fill for each caliber I shoot. I try to sort the boxes with ammo roughly from oldest-newest and pull ammo from the oldest can first. Once that can runs low I order another case of ammo and start using the next oldest can of ammo.
@CaptGus
Жыл бұрын
If your optic were set low as possible, without a riser, you would not need a cheek riser and it would be more in line. how you shoot your AK
@Feldmutze
Жыл бұрын
The current height of the red dot puts my neck is a quite comfortable position for a heads-up shooting position so I'm not crunching down my neck to get a sight picture. The cheek riser on this stock provides a better point of contact but it's not absolutely necessary, and I still get chin weld even without the riser.
@jeremy67A
Жыл бұрын
good cerakote
@jameszclark
Жыл бұрын
but is the PT3 five times the price better?
@Feldmutze
Жыл бұрын
Very good point. Also, I didn't realize the price went up on the PT-3 that much. When I bought the PT-3 it was $330, and at that price I'd have said it's definitely worth the price difference but not when it's 5x more.
@juanvaldez530
Жыл бұрын
You could use an Attero mount to bring your red dot down.
@Feldmutze
Жыл бұрын
Thanks for the suggestion. I actually quite like the current height of the red dot as it's quite comfortable, the cheek riser on this stock just provides a bit better point of contact but it's not absolutely necessary.
@Kai-ky6tf
Жыл бұрын
I have the same cheek riser issue with lots of Magpul stocks especially the ACR. I have no idea why people keep making stocks for giraffes 😂
@juanbaixeras6965
Жыл бұрын
You can pull the cheek riser back. It slides on the notches
@Tdow56
6 ай бұрын
how does the zhukov stock's compare to the original stock in terms of using iron sights?
@Feldmutze
6 ай бұрын
The cheek weld feels very similar between a normal stock and the Zhukov, doesn't really improve or detract from it either way.
@bobbyb7127
Жыл бұрын
On mine, when the stock is extended a couple notches, it has play in it and makes a clicking sound when pressing against your shoulder. Does yours have play when extended and make a sound? I'm more worried about it breaking upon recoil. And it's fine (tight/no noise) when not extended at all. Update: I just saw at the 10:40ish mark where mine does exactly the same thing, making that noise and slop. After having it for awhile have you had any issues with the stock extended.
@Feldmutze
Жыл бұрын
I haven't had any other issues, and I've been using this stock a lot since making this video. The clicking sound is still present, but is no different than how it was in this video, and the stock is still sturdy otherwise.
@bobbyb7127
Жыл бұрын
@@Feldmutze Thanks!
@Ghost-sz2qm
9 ай бұрын
Is that a rattle can paint job or cerakote?
@Feldmutze
9 ай бұрын
Cerakote
@JRaptor9
11 ай бұрын
Do you think the 0.25 height would allow charging and firing while folded? Thanks man
@Feldmutze
11 ай бұрын
I don't think it would allow charging and firing. If I remove the cheek riser I barely have room to charge the rifle, so even their shortest cheek riser would interfere.
@JRaptor9
11 ай бұрын
@@Feldmutze ah man i see. Thanks! I run a zhukov now and i see what youre saying. Barely room already. Preciate it.
@JRaptor9
11 ай бұрын
@@Feldmutze will probably use a riser anyway for the two tone aesthetic black on fde. They only $12 so will try. 👍🏼
@bwagner1722
2 ай бұрын
Dude we must be related. I have the same german ww2 field cap and russian gorka lol
@Feldmutze
2 ай бұрын
Lol nice. That's a coincidence that doesn't happen every day.
@bwagner1722
2 ай бұрын
@@Feldmutze got my cap from lost batallions highly recommend their german reproduction merch
@DeadMarine1980
Жыл бұрын
When folded.... does this fit in a typical back pack easily?
@Feldmutze
Жыл бұрын
I've actually tested that in the past out of curiousity, and unfortunately no it doesn't due to the barrel length. If you get something just a but shorter like the AK-104 you'll be good to go.
@mrguiltyfool
Жыл бұрын
Are u going to get the midway industries ak aloha stock
@Feldmutze
Жыл бұрын
Probably not as this Zhukov stock works well for me. Actually, had I known about Midwest's Alpha stock about a month earlier I would've certainly tried it on this build instead, but now since I already have the Zhukov on here, I'm not too inclined to replace it unless it breaks.
@mrguiltyfool
Жыл бұрын
@@Feldmutze fair enough
@kygent508
6 ай бұрын
What sling is that?
@Feldmutze
6 ай бұрын
Ferro Concepts Slingster
@bobbyb7127
Жыл бұрын
Can you charge it with the stock folded in? Thanks.
@Feldmutze
Жыл бұрын
With the cheek riser - No But without the cheek riser - Yes, you can charge it with the stock folded
@bobbyb7127
Жыл бұрын
@@Feldmutze Thanks!
@christopherapp759
Жыл бұрын
What handguard is that?
@Feldmutze
Жыл бұрын
Sureshot MK2.1 chassis. I did a review on it a few weeks back as well. kzitem.info/news/bejne/sG-cwH-LsH5mmag
@localforearm1627
Жыл бұрын
what 545 ammo do you use
@Feldmutze
Жыл бұрын
For home defense I use 69 gr. Lugansk surplus ammo, it works great from the past tests I've done. For practice I've been using a lot of Golden Tiger lately as there's a lot of it in-stock still and it runs well in my experience. I also use a lot of Barnaul though I'm running low so there won't be much more of that. I try to avoid TulAmmo as I've had a lot of bad experiences with it, though I have quite a bit of it since it was the only ammo in stock when I last bought a bunch of 5.45.
@localforearm1627
Жыл бұрын
@@Feldmutze yea i hate tulammo, bad experiences. thanks for the recs and the videos. im thinking of getting the chassis and you are the only person with good videos on it
@thedumbguncollector5546
4 ай бұрын
I need you to get one of those Ukrainian stocks and let me know what you think!
@Feldmutze
4 ай бұрын
I looked at them a few reviews of them in the past and decided to get this Zhukov instead as apparently those stocks don't lock in the folded position which I didn't like. Other than that they do seem like they're well made so I still might end up getting one, maybe on a future build I'm planning.
@Chaos_Murakumo
11 ай бұрын
So good Russia copied it and it's the standard issue for all their AKs going forward.
@troyelder56
11 ай бұрын
6:25 the length of pull on the stock shouldn’t correlate to eye relief on a “scope” or prism you want the cheek riser closer to your optic imo. What you’re saying is you want 12” between you and the optic 🤨
@Feldmutze
11 ай бұрын
I didn't say that at all. I'm saying you can't physically put your cheek on the cheek riser if your stock is pulled all the way out unless you have a giraffe neck and are leaning forward. Curious why you want the cheek riser closer to the optic itself?
@AsukaLangleyS02
4 ай бұрын
Magpul can keep their plastic trash and ACR.
@RideShootDrink
5 ай бұрын
Please don't flag the camera. It's unpleasant
@Feldmutze
5 ай бұрын
Get over yourself. The camera is an inanimate object.
@RideShootDrink
5 ай бұрын
@Feldmutze it shows your immaturity as a content creator. None of the mature channels do this. Keep doing it, and you will go far.
@Feldmutze
5 ай бұрын
@@RideShootDrink Seethe more, fudd.
@RideShootDrink
5 ай бұрын
@@Feldmutze sure, on your face
@Feldmutze
5 ай бұрын
@RideShootDrink Wow, and you're calling ME immature?
@holdenwilky4922
Жыл бұрын
The issue in my eyes isn’t the cheek riser it’s your 2inch tall red dot, kinda goofy/ not practical.
@Feldmutze
Жыл бұрын
The height of the red dot on this setup makes it almost the exact same as an AR with a Unity riser, and the advantages of that have been talked to death on other channels, so I'd recommend checking out those.
@holdenwilky4922
Жыл бұрын
@@Feldmutze yessir, educated myself very well about such things/topics. At the end of the day you want a cheek weld, not a bottom of your chin weld.
@jimmysmith3255
2 ай бұрын
Not having a qd on the other side sucks . I cant believe there isnt one there .
Пікірлер: 94