Thank you so much for this informative video. I tore mine down, cleaned the heck out of it and re-packed the bearing as well as the ratchet assembly. My 50 year old freewheel works like new!
@operabike
3 жыл бұрын
Good to hear it was helpful.
@patreilly4293
6 ай бұрын
Thanks so much for a great video. I’m restoring a 1973 Schwinn Sports Tourer with a unique freewheel that has 1-inch spacing on the 2 largest cogs.
@operabike
6 ай бұрын
Thank you. Sounds like a fun project. You probably know the "skip tooth" freewheel cogs were designed for better shifting. I've never owned one so not sure how well it worked. Have fun!
@iliketurtles2993
5 ай бұрын
Awesome man iv been fixing my old bike im excited to take this apart and clean mines so dirty
@leewalsh6767
2 жыл бұрын
Thanks for this excellent and informative video. I now know how to service my 45 year old Raleigh bike freewheel. I recall taking it apart to clean it when I was 16, but dont remember it being that easy. Particularly the pawls / bearings replacement bit :-)
@operabike
2 жыл бұрын
Thanks for the comments. Glad to know this helped. Have fun with that Raleigh!
@musichead4555
3 жыл бұрын
Thanks alot man, i thought i was never gonna get mine open helps alot on my bike restoration.
@operabike
3 жыл бұрын
You're welcome and always good to hear the video was helpful. Good luck on your restoration.
@PSYD0M
2 жыл бұрын
Thank mate 🙏 very helpful ..
@operabike
2 жыл бұрын
My pleasure!
@minicity9378
3 жыл бұрын
Hi, Great video, just waiting for the splined tool to arrive so i can rebuild our Raleigh Wisp cassette. What size are the bearings? Thanks
@operabike
3 жыл бұрын
Hello. Glad you liked the video. I thought I mentioned the bearing size but just reviewed the video and it appears I forgot that! The bearings are 0.125 inches diameter (3.17mm). Thanks!
@johnprice1105
2 жыл бұрын
Could this be put back together with thinner spacers ti allow it to be compatible with my 7 speed shifter? Thanks
@operabike
2 жыл бұрын
I believe so, but it would be limited to 4 usable "speeds" because the two smallest cogs are machined together and the spacing cant be changed between them to be compatible with 7 speed indexed shifters. You'd have to find spacers that make the cog to cog spacing 5.0mm instead of the current 5.5mm and you'd also have to put a spacer on the inside of the largest cog since you are shrinking the overall width. The two smallest cogs screw onto the body and compress all the cogs and spacers to keep them tight. Hope this helps.
@Jezze90
2 жыл бұрын
Thanks for the video! Very helpful. One question though, could I do this while the freewheel is mounted on the wheel? It seems that it is possible, I would like to avoid purchasing the tool for only this one time overhaul. Thanks!
@operabike
2 жыл бұрын
Absolutely! This is an excellent question I didn’t address in the video. You’ll need a second chain whip tool to hold the freewheel while you loosen the two smaller cogs with the other one. You’ll be able to disassemble normally from there. Have fun!
@Jezze90
2 жыл бұрын
@@operabike Thanks! I'm having a problem where the freewheel sometimes doesn't engage and my pedals spin freely. I'm guessing that the "nails" are full of old grease and grime that are preventing the teeth to engage. Only one way to find out I guess, open the damn thing! :D
@oxidazora6831
Жыл бұрын
How do you get it off the bicycle wheelset?
@operabike
Жыл бұрын
If you look at the video starting at 2:30, I mention needing a special freewheel tool to remove it from the rear wheel hub. It is Bicycle Research part number CT-3. You can leave it on the rear wheel hub if you want, but you need two chainwhip tools. One to hold the freewheel from spinning and one to unscrew the two small cogs from the freewheel body. Hope this helps.
@stanislavsolodky9673
2 жыл бұрын
nice, but why you didn't put there lube inside?
@operabike
2 жыл бұрын
Thank you. I was just making an informational video and not assembling it for real. Good catch though!
@oxidazora6831
Жыл бұрын
Can you forget it from the freewheel using the box bb tool?
@operabike
Жыл бұрын
Can you ask this question a different way please? I don't understand. : )
@oxidazora6831
Жыл бұрын
is it possible to remove maillard normandy from the freewheel using the BB Toolbox?
@operabike
Жыл бұрын
@@oxidazora6831 As far as I know, there is only one tool that will fit this freewheel to remove it. That is the Bicycle Research CT-3.
Пікірлер: 26