I'd been making these for years on my cnc. A bit of advice on the glue up use a mix of wood glue and ca glue in key areas. this allows you laminate the two board before the wood glue sets allowing you to avoid fussing around with clamps.
@grovebuilds
19 күн бұрын
I’ve thought about this and want to try it, I just have no experience with ca glue. I really need to try it out though!
@myhoneyshandmade1077
19 күн бұрын
love that trick...works well.
@zrhaun
17 күн бұрын
Great idea! I'm truly impressed that you can do all that cutting with the laser and it's not charred to death on the sides. that's where I struggle with wood. its always got nasty soot all around the edges.
@grovebuilds
16 күн бұрын
The 5mm pine cuts really good on the laser. Some charring on the sides but not bad! I’ve tried other woods but they char too much like you said.
@RBallarddesigns
23 күн бұрын
Also you could use Baltic birch plywood and that would give a nice look as well. Great product!
@grovebuilds
23 күн бұрын
I actually thought about that but I was worried about the veneer coming off with kids playing with them. Just my thought
@LYTOMIZE_Woodshop
24 күн бұрын
Great product for sure. I've been making puzzles out of hardwood with my CNC machine for a few years. I like your variant - i just might start offering a second option! Nice work!
@grovebuilds
24 күн бұрын
Thank you!! I’m hoping I can add a CNC to my shop soon so I can start using more hardwoods instead of just pine on the laser engraver
@LYTOMIZE_Woodshop
24 күн бұрын
@grovebuilds Yeah. You'll love it... I started the other way around. A CNC machine and then three lasers. It's a fun journey - knock out a few more puzzles then you'll level up again and again! 😀
@PiercesPerfectPieces
21 күн бұрын
Great Project, Great Breakdown, & All Together A Great Video! 👍 💯
@grovebuilds
21 күн бұрын
Thank you!!
@JustinBoyd96
26 күн бұрын
Okay I see you Cuzzin AJ! This was awesome! Super cool! 👏🏻 Love the bloopers…idiot…😂
@grovebuilds
26 күн бұрын
Thanks!!
@jimrosson6702
21 күн бұрын
Great idea
@grovebuilds
21 күн бұрын
@@jimrosson6702 thank you!!
@asseenonline7951
20 күн бұрын
I call BS - there's hundreds of these listed on Etsy. Everyone who tries to jump on the get rich quick laser bandwagon is going to be frustrated, pissed off, and trying to sell that laser within 6 months. Nice video but pie in the sky dreaming.
@grovebuilds
20 күн бұрын
I can honestly say this worked for me! I had 42 orders in less than 24 hrs and had to stop taking orders because I was overwhelmed. I recently posted I was taking more orders and had 15 more puzzles orders in a few days. Will this work for everyone? No but for people who are willing to put in the work they can make good money making these. This is how I did it and it worked for me. Take that for what it’s worth.
@asseenonline7951
20 күн бұрын
@@grovebuilds congrats on your success!
@GokouZWAR
14 күн бұрын
He’s already made his money, that’s why it’s on KZitem. You have to be the first one with something no one has done before. They’re on Etsy all over the place now because someone saw his item and copied it, and they copied the copy, etc. so now he can post it on KZitem and make the view time so it’s icing on the already baked cake. If you’re watching videos for ideas, you’re too late. That’s why you’re salty AF.
@Book-Gnome
24 күн бұрын
I would save time on the glue up phase by putting something heavy on top of it rather than messing with all those clamps. It doesn't have to be super heavy either, think 2 bricks end to end or another board as a weight transfer with a gallon paint can on top of that.
@grovebuilds
24 күн бұрын
That’s a good idea! I’ll have to try it out
@JasonParkers
23 күн бұрын
Awesome work! What power xtool are you using to cut through 5mm?
@grovebuilds
23 күн бұрын
Thank you! I have a 10watt Xtool D1 non pro
@joshuabc4
27 күн бұрын
Yeah man!!!!
@user-ok8wg4td7w
22 күн бұрын
What are you using for a blade on your table saw to rip the 1x4 s? And also, how many teeth blade? Thanks
@grovebuilds
22 күн бұрын
I use a Diablo 40 tooth general purpose blade. You can get them at Home Depot!
@jimmybranton822
23 күн бұрын
Thanks for the video. Which model of the Xtool laser cutter do you have?
@grovebuilds
23 күн бұрын
Xtool D1 non pro 10watt
@jimmybranton822
23 күн бұрын
@@grovebuilds Thank you!
@jaredpullis2430
23 күн бұрын
@@grovebuilds I might have to try cutting some 5mm pine. I've been using basswood and plywood type wood but anything over 3mm my D1 Pro 10watt struggles with. I'm guessing because of the glue and pockets (inconsitencies) in plywood.
@That0verthere
25 күн бұрын
Outstanding video. Whats the watts on the laser?
@grovebuilds
25 күн бұрын
Thank you! 10watt Xtool D1
@RoHof86
24 күн бұрын
I have a 20 watt. What are your settings for the 10 watt. I'm guessing I could slow the power down for mine?? (Just beginning my xtool journey. So far, it's been rather bumpy. Lol. 😂)
@grovebuilds
24 күн бұрын
@@RoHof86 I set my speed to 3.5 mm/s and my power to 90%. If you have a 20 watt you can probably speed it up and cut the puzzles faster
@roymccarty6931
20 күн бұрын
Why the little circles nest to all the letters?
@grovebuilds
20 күн бұрын
@@roymccarty6931 that’s to make it easier to get the letters out. Gives you somewhere to put your finger to get the letters out.
@stacymcvey4229
13 күн бұрын
Nope. Bad idea. They won't sell. Don't believe these click bait KZitemrs.
Пікірлер: 38