Thank you for watching, thank you for your great support! ► Tutorial and Plans available: allflavorworkshop.com/how-to-make-a-diy-jigsaw-table/ ► ALL Woodworking Plans: allflavorworkshop.com/woodworking-plans/ 🛠 All My Tools & Gear: allflavorworkshop.com/tools-and-resources/ Check out the description. Subscribe not to miss anything!👍 THANKS!
@sticky59
3 жыл бұрын
@Gianni Finnegan We dont, and everyone knew she was doing that guy from 2 streets over.
@sticky59
3 жыл бұрын
One of the better designed tables. Some real thought gone into this one. Well done.
@subramaniamchandrasekar1397
3 жыл бұрын
Your drilling machine and stand look solid. Particularly the chuck. Can you tell some information on this?
@naquawoodworker1067
3 жыл бұрын
Nice :) : here’s an upgrade idea, if you angled that support arm, let’s say 45 degrees backwards, then you could make cut-outs not only along a long board but across it.
@AllFlavorWorkshop
3 жыл бұрын
Hi Naqua, great idea, thanks! Something for another creation / video. 👍 Happy you liked it and thanks for watching :)
@pikifrino
3 жыл бұрын
Very good & neat job. Thank u!
@AllFlavorWorkshop
3 жыл бұрын
Thank you too Stelios. Appreciated.
@carlosgoncalves4363
2 жыл бұрын
Belo projeto,vou tentar fazer um parecido
@GeekMustHave
3 жыл бұрын
Most excellent video and project. I've looked at quite a few vid's on this and your is the best by far. Do you have or sell plans? Keep broadcasting!!
@AllFlavorWorkshop
3 жыл бұрын
Hi there, thank you for such a nice comment and support. I have plans on paper, they are not public though yet but I am planning on doing so. I am glad you liked the video. Much appreciated 👍
@carterscustomrods
3 жыл бұрын
In this is great. I've been trying to find a long scrolling blade to make thinner, more accurate cuts. But it seems they are all under 4 inches. Any suggestions?
@AllFlavorWorkshop
3 жыл бұрын
That's right. Same struggle here. :/ With the jigsaw table build they work fine with narrower wood. I think the precision would be a quite off if longer scrolling blades were used. Fot that I am planning to build a scroll saw. Let me know if you get some info on those long jigsaw scroll blades. Thanks
@carterscustomrods
3 жыл бұрын
@@AllFlavorWorkshop will do. I was actually considering making my own. Perhaps with a sawzall blade, or a coping saw style blade. I'd love to see a scroll saw table build. I made a large one with a router and a long, but dangerous bit, but to get it to cut thin is tough. Perhaps it might be better to use a cut-out tool? I tried with a rotary tool, but tbh, the rotary tool industry is garbage. Dremel went to 💩, and I tried so many other brands, but they all seem to be junk (if you need adjustable speed). Milwaukee has a great o e in their 12v lineup, but for most things I like a rotary tool to be corded. With that said, the cutout tool might be the way to go for a scroll saw. They tend to be pretty strong, but sometimes, too strong. Either way, I look forward to the scroll saw build. And I'll let you know how my "long scrolling blade" adventure goes lol.
@AllFlavorWorkshop
3 жыл бұрын
@@carterscustomrods Sounds interesting. And I wonder myself. I've been thinking about this for some time and I see there are few setbacks on the way. I am planning on making one in the future but I am still figuring our few things. Nevertheless there will be few updates on the build until its all done.. ;) let me know.
@sherthmer
3 жыл бұрын
Sehr gute Lukas. Sie nehmen nach dem Meister JSK, aber Ihre Arbeit ist besser für den durchschnittlichen Handwerker geeignet!
@yurchik7916
3 жыл бұрын
Самое сложное изобретение, но мастеру - класс!!
@AllFlavorWorkshop
3 жыл бұрын
Thank you Yurchik. Appreciated. 👍
@yurchik7916
3 жыл бұрын
@@AllFlavorWorkshop Thank you
@carterscustomrods
3 жыл бұрын
Do you think a v-slot aluminum extrusion would be a better support bar to run across the top? It would be more rigid, lighter weight, and easier to adjust. But I'm trying to think of the downfalls to using an extrusion.
@СергейГабов-я9з
3 жыл бұрын
Отличный станок!👍
@AllFlavorWorkshop
3 жыл бұрын
Thank you Yuri 👍
@siamaklighvani3951
3 жыл бұрын
Excellent
@AllFlavorWorkshop
3 жыл бұрын
Thank you Akbar. Happy you like it. :)
@frittandy
3 жыл бұрын
Mythical. Tanks
@AllFlavorWorkshop
3 жыл бұрын
Thank you too! 👍
@DenAlexV
3 жыл бұрын
Я сто раз подумал бы, перед использованием.придумайте защиту на пилке.уж очень она не внушает доверия.вся конструкция хорошо продумана.единственный,на мой взгляд, минус.
@AllFlavorWorkshop
3 жыл бұрын
Hi Денис. Good point. Everyone take precautions while working with power tools. Thanks, stay safe. 👍
@banditva8040
2 жыл бұрын
Any plans
@AllFlavorWorkshop
2 жыл бұрын
Working on it, thanks ;)
@abdolalighalavand240
Ай бұрын
👩🎓♥️ 🙏
@stenbaltzerjensen8599
Жыл бұрын
Stiksav
@cesarlino5784
2 ай бұрын
Muestre las medidas de la mesa caladora todo los canales de KZitem no las pasa o se tiene que pagar seamos mas didáctico en la enseñanza por lo menos hacer un plano gracias
Пікірлер: 33