If someone brought me that project, I would have had NO problem getting it done. I would have just emailed "a guy I know" and said "Hey, Chad, how soon can you have this done for me?" (LMAO). Nice work. Very informative. Always nice to see you on KZitem.
@ChadStanton
Жыл бұрын
Hahahaha make easy money as the middleman. You are smarter than me Jeff
@MsRmaclaren
Жыл бұрын
Sounds like a plan I like. That maths is hardz!
@jeffburton1326
Жыл бұрын
@@ChadStanton Why re-invent the wheel when you can have someone else do it for you? :)
@jasonoliver7881
Жыл бұрын
You must have danced super hard after this one. Good job, Chad!
@nicknick1963
Жыл бұрын
I was completely lost throughout the video but couldn't stop watching.
@cobberpete1
Жыл бұрын
And this is why you are the Craftsman of choice for those 'Difficult' jobs, even with time constraint. What about making an old fashioned mitre box and cutting odd angles with a small fine hand saw. Happy New Year to you and the family Chad
@ChadStanton
Жыл бұрын
Peter, my friend, that miter box idea is perfect.
@harveyellis6758
Жыл бұрын
Great video! Lots of skills needed back in the "old" days.
@ChadStanton
Жыл бұрын
I know right?!?! I am always impressed how they did such complicated things without electricity
@TheChrisPineWorkshop
Жыл бұрын
I had not watched a video form you in a while! Sorry! Great stuff Chad! Hope you are well. Happy new Year!
@ChadStanton
Жыл бұрын
Chris my old friend. Hope you and the family are doing well.
@williamellis8993
Жыл бұрын
Great job, Chad. I'm a retired engineer and my head was spinning halfway through this project. I possibly could have figured it out in time but like you said, why reinvent the wheel. Happy New Year. Bill
@ChadStanton
Жыл бұрын
Oh thank you Bill. I don’t think of myself as a smart guy. But I am someone who won’t give up.
@davidmatke248
Жыл бұрын
Happy New Year!
@henrysara7716
Жыл бұрын
Thank you Chad, and Happy New Year.
@ChadStanton
Жыл бұрын
Thank you so much! And the same for you
@dpmeyer4867
Жыл бұрын
Thanks
@cobberpete1
Жыл бұрын
Thanks for all the good tips given over the years.
@ChadStanton
Жыл бұрын
Thanks for always watching. It means a lot to me.
@nobuckle40
Жыл бұрын
Great lesson Chad. It goes to show that things aren't always as simple as they seem.
@ChadStanton
Жыл бұрын
Thank you my friend
@bobh64
Жыл бұрын
Thanks!
@ChadStanton
Жыл бұрын
Bob. Thank you so much. I truly appreciate it.
@onehandedmaker
Жыл бұрын
Hi from Australia Like your onscreen personality fun to watch. So much to learn from your channel including window repair. I have subscribed and will be watching a lot of your older videos. Regards James One Handed Maker
@ChadStanton
Жыл бұрын
Oh thank you very much. My sister lives in Perth.
@onehandedmaker
Жыл бұрын
Only 4093km away but Perth is a beautiful city
@ChadStanton
Жыл бұрын
@@onehandedmaker what city are you in?
@ChadStanton
Жыл бұрын
@@onehandedmaker by the way I watched your floating top table. Beautiful!
@onehandedmaker
Жыл бұрын
Port Macquarie
@afonsokreling2692
Жыл бұрын
Thanks! Not only for the video which, by the way, was great!
@afonsokreling2692
Жыл бұрын
… and happy new year!
@ChadStanton
Жыл бұрын
Wow thank you so much my friend. Hope you and the family are doing well.
@user-zt3wj3sk9s
Жыл бұрын
감사합니다.
@ChadStanton
Жыл бұрын
Thank you so much Sunghee
@TankGunner84
Жыл бұрын
I repaired/ restored 10 sash windows from the mid 1800s and made pretty good money, though I probably didn’t charge enough.
@ChadStanton
Жыл бұрын
I got a silly amount for it. I was truly surprised.
@TankGunner84
Жыл бұрын
@@ChadStanton it’s a truly specialized type of work. People who can do that are getting fewer and father between. You did a great job it looked like. You deserve that high price!
@ChadStanton
Жыл бұрын
@@TankGunner84 Thank you, Aaron. And hats off to you too for doing them.
@alaskankare
Жыл бұрын
so why not make a negative plane for the profile? then you can use a shooting board or other jig to hold the piece at the angle needed. plane it down. good to fit. I would think they would have the positive to make the molding and a negative for fitting together
@ChadStanton
Жыл бұрын
That's a great idea! Unfortunately, I don't know where to get a plane like that. Thanks for the suggestion
@TankGunner84
Жыл бұрын
Hey chad, where did that pic of that old home 0:46 come from? It looks just like one being restored in my small town. Maybe the rendering of what it’s going to look like. Though the shape and everything is there of course.
@ChadStanton
Жыл бұрын
Interestingly I typed in historical house in google and that was the first one that popped up and oddly the description says it’s from my town. Kind of crazy.
@squareswing
Жыл бұрын
Nice vid. I have a lot of "can do", but for this job I don't think the customer has enough "can pay" for me. By the way, you should get yourself a real nice pencil sharpener that you look forward to using sometimes.
@ChadStanton
Жыл бұрын
I thought Santa was going to bring me a pencil sharpener this year but all i got was a lump of coal. 😁
@arifulhasan3550
Жыл бұрын
I miss Safety Dan
@whatthefunction9140
Жыл бұрын
nice windows chaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaad
Пікірлер: 52