Want to get your own 32” LASFIT LED light bar? Click the link below ⬇⬇ www.lasfit.com?afmc=41m
@ryancarlson8278
2 жыл бұрын
Looks good man nice video! Anyone who hasn't installed yet save yourself the hassle with the shutters I added a couple washer behind the mounting bolts to clear the fins.
@TheBlueGarage
2 жыл бұрын
Thanks man, and great call on the washers. I haven’t run into any issues with the way I did it, but that is so much smarter and easier. I appreciate the heads up.
@samuelburford6227
2 жыл бұрын
Great advise ! Thanks. I will do that instead
@Barefacedcrib
Жыл бұрын
Does it actually throw light further than the headlights? Or is it just throwing light to the sides?
@TheBlueGarage
Жыл бұрын
I’d say it does, more like an additional hi-beam light.
@Hiltrljr
6 ай бұрын
When I installed the brackets, the measurement between them is 31”. A traveller 30” is too short, I’ve got a lastfit on the way…hopefully it works
@TheBlueGarage
6 ай бұрын
Interesting, I never got the exact measurement. But I am assuming that the 30” light bar from LASFIT accounts for the length of the light itself, not accounting for the 1/2 inch on either side. I could be wrong, but that’s the exact setup that I used here.
@matthewmongan6616
Жыл бұрын
Thank you so much been wanting a behind the grill light bar since i bought my 2020. Had a rough country on my 2014 but when i first bought 2020 they didnt have anything..got the same color as you glad to see the black z71 emblem on it before i buy it
@TheBlueGarage
Жыл бұрын
Nice, not too difficult of an install. The hardest part was getting the wiring through the firewall. My daughter was able to get her hands up behind the dash to pull it through with the coat hanger.
@paulgrattan8504
Жыл бұрын
It looks like heat was the issue with the shutters. After sufficient heat and the slightest curl it finally was enough to touch the shutters.
@TheBlueGarage
Жыл бұрын
Could be, I should have just placed a few washers there for space… In hindsight
@PAPA-zi6fz
Жыл бұрын
Awesome job with the light bar...I was going to just hire someone to do it being that I don't like to mess with the electrical on a vehicle but LASFIT assure me I can do it myself....I would like to attempt to install the same bar on my 2023 Custom I was just wondering if you have a video of you installing the whole harness from the beginning. Thank you in Advance...
@TheBlueGarage
Жыл бұрын
I do have my “Upfitter Switch” install video, that should help you. If not, the key to wiring is finding a good ground in the engine bay, and running the “hot” (red) wire through the firewall to connect to your power switch. From there is is a simple twist and splice together. If you can find a video from mine that will help. Almost any video on how to splice wires together will help. Altogether, it should be a very simple process.
@jameschavez33
2 жыл бұрын
Looks good man, I installed the rough country light set integrated on Both side of the bow tie.
@TheBlueGarage
2 жыл бұрын
Nice man, and thank you. I was contemplating that as well. Still might do that.
@jameschavez33
2 жыл бұрын
@@TheBlueGarage it looks great on the truck, you wouldn’t regret it one bit
@TheBlueGarage
2 жыл бұрын
@@jameschavez33 for sure, I love the look. I just don’t know if it will be too much light or not now.
@mikebecerramusic
2 жыл бұрын
I’ve seen that set up looking to do the same rough country
@TheBlueGarage
2 жыл бұрын
@@mikebecerramusic definitely a good look!
@HockeyRef14
2 жыл бұрын
Can you add a video on connecting the wires to the Aux control panel? Just bought the Aux panel two weeks ago and going to be installing hopefully this week. Read another comment in here and agree - Install the Rough Country LED Grill Lights - they are super clean and happy I did them!
@TheBlueGarage
2 жыл бұрын
I’ll see what I can do. Are you looking for a video on how to connect different lights and accessories to the switches?
@HockeyRef14
2 жыл бұрын
@@TheBlueGarage yes - will be doing my project next week! Thanks
@TheBlueGarage
2 жыл бұрын
@@HockeyRef14 sounds good I can do that.
@TheBlueGarage
2 жыл бұрын
I’m not sure if I’ll have enough time to make another video before your install. If you message me on Instagram, I can send details your way.
@nicholasbarber1071
2 жыл бұрын
@@TheBlueGarage Can I contact you and find out how you wired the light bar to the Aux factory switches. I have the lasfit harness but not sure if I use it all or just parts of it. Thank you
@ivanmelendez2889
Жыл бұрын
Have you made a video connecting the wires to the up fitter switch? I want to add a light bar to my trucks grill.
@TheBlueGarage
Жыл бұрын
I have, this is the most recent one. kzitem.info/news/bejne/qqxm1qh6oYKKqIY
@garyallen5297
4 ай бұрын
Well you showed all the easy parts except how to get the switch on off button thru the firewall that’s the hardest part of the entire process
@TheBlueGarage
4 ай бұрын
Use a coat hanger. Sorry I ran out of daylight that day. Should have waited for the next day to film it.
@djrekklessdmv8757
11 ай бұрын
In reference to the brackets, why does say for 20 inch light bars instead of 32 inch ? I can't find them.
@TheBlueGarage
11 ай бұрын
They are listed incorrectly on the site. When they came in the mail, instead of getting new brackets, I ended up purchasing the larger 32” light bar instead.
@djrekklessdmv8757
11 ай бұрын
DISREGARD. I went back to the beginning of the video and saw where you used the original brackets.
@samuelburford6227
2 жыл бұрын
I love this bar light on your truck. Looks awesome. I went to order but Lasfit does not show they sale a 30” bar light. They do have a 32”. Is yours a 32”??? And did you use the 20” bracket from American Truck?
@TheBlueGarage
2 жыл бұрын
Thanks man! It is the 32”, they have since changed it on their site from 30 to 32”. I put the link for the brackets in the video description too.
@Chuy-tu1bx
9 ай бұрын
20’’ bracket fits the 32’’ light bar?
@TheBlueGarage
8 ай бұрын
Correct, it’s listed wrong on American Trucks website.
@codyhatke7743
2 жыл бұрын
I know your video says 30in, but lasfit only has 32. Just got the brackets for my 21 trail boss and want to get the light bar as well
@TheBlueGarage
2 жыл бұрын
It used to be listed as a 30” light bar on their page. It should be the same one.
@codyrodgers8650
2 жыл бұрын
Great video, I have the same brackets ordered from American Trucks. So just to confirm that’s a 32” bar?? Just curious before I buy a light bar. Thank you
@TheBlueGarage
2 жыл бұрын
Thank you, and yes it’s the 32”, the link I posted will take you to the right one.
@Nick-zc2yu
2 жыл бұрын
I’m just confused as to why the brackets show for 20” light bar. 10” is a big difference. Weird
@TheBlueGarage
2 жыл бұрын
I agree, not sure where they would have been connected in the light bar was 12” shorter. But at the end of the day a bracket of this type is kind of universal, as long as it reaches the bolts you’re securing it to.
@ARivas22
2 жыл бұрын
Now I'm seriously debating getting this for my RST lol can you link the LED turn signals on lasfit? I need to get rid of that amber on mine lol
@TheBlueGarage
2 жыл бұрын
Absolutely, no problem. It looks much better with the LEDs instead of the halogens. www.lasfit.com?afmc=41m Once you go to the link, search by vehicle and they have all the bundles there. 👍🏻
@lbzmx213
3 ай бұрын
Do you know if a dual row light bar will fit or will the second row be blocked by the grill in essence making the second row useless? I’m going to be doing this modification no matter what but I’d like to do a dual row light bar if I can
@TheBlueGarage
3 ай бұрын
I have seen pictures of people with the dual row, so I’m pretty sure it would work.
@kowalski624
Жыл бұрын
Think this same set up would work on (my) a 2022 refreshed body style? Btw great video and walk through.
@TheBlueGarage
Жыл бұрын
Thank you, I appreciate it. I would think that it would work the same.
@chrismoore1177
2 жыл бұрын
Do you think the brackets will work on the top as well to install a second light bar?
@TheBlueGarage
2 жыл бұрын
I don’t believe so, because those bolts are almost directly behind the arms that run through the center of the grille.
@MrLoui86
Жыл бұрын
Would spacers put that light bar in the way of the grille? I mean instead of cutting the shutters.
@TheBlueGarage
Жыл бұрын
Not at all, there is plenty of room. In fact, that’s what I should have done in the first place.
@ADRIANGONZALEZ-wc3nj
Жыл бұрын
So the bracket its 20inch long on each side or 10 on each side to make 20inch?? I want make my own bracket can someone help me?
@TheBlueGarage
Жыл бұрын
The bracket fits any size light bar. But to fit it inside the grill, like I did, you will need the 32” light bar. I’m not sure why American Trucks advertises the brackets with that image, it’s incorrect
@Kevin-kc5ed
2 жыл бұрын
Did you get any check engine light from trimming the shutters?
@TheBlueGarage
2 жыл бұрын
No, not at all. But I would recommend now, in hindsight, just adding a few washers behind the bolts on either side. There is plenty of room to spare.
@barkerman0974
2 жыл бұрын
Do you have a link for those brackets?
@TheBlueGarage
2 жыл бұрын
Yes I do, thanks for the heads up. I’ll add it to the description as well. www.americantrucks.com/silverado1500-20-inch-luminix-led-light-bar-grille-mount-light-brackets-2221.html
@barkerman0974
2 жыл бұрын
@@TheBlueGarage Thank you sir!
@TheBlueGarage
2 жыл бұрын
@@barkerman0974 You’re welcome!
@harshfilmz3685
Ай бұрын
would these brackets work on a 2019 gmc at4?
@TheBlueGarage
Ай бұрын
I would believe that they would. However, when I bought these, they were all I could find that would fit. I know since making this video that Peak makes a set specifically for our trucks.
@XxMarc909xX
2 жыл бұрын
Do a better review on the light bar because it looked a little weak didn’t seam like it’s any brighter then the headlights and only different I noticed is maybe a little bit flood light
@TheBlueGarage
2 жыл бұрын
Checkout one of my more recent videos on the LED pods, I compare all of my lighting.
@roadtripsmargaritas599
2 жыл бұрын
Hello, could you tell me how you connected the light bar to the upfitter switches, I have the same in my 2500. Do you need to bypass the wire harness relay? Thanks
@TheBlueGarage
2 жыл бұрын
There should be a series of 4 cables under the dash. I show them in my video. You will need to just wire directly to one of them. Super easy and cheap to do. You can get soldering kits for cheap at any auto store.
@roadtripsmargaritas599
2 жыл бұрын
Thanks for getting back to me.
@TheBlueGarage
2 жыл бұрын
@@roadtripsmargaritas599 anytime, glad that I can help.
@ivanmelendez2889
Жыл бұрын
@@TheBlueGaragedo i need to ground the light bar once I connect it to the cable from the up fitter? Or does it get grounded once it’s connected to it?
@TheBlueGarage
Жыл бұрын
@ivanmelendez2889 I grounded it before connecting it to the Upfitter switch panel. But what really matters is that it is grounded before you try to power it. Really nothing will happen because it will be an open circuit.
@73jch
2 жыл бұрын
I dont see a 30 in they have a 32 in light bar do you have a part number?
@TheBlueGarage
2 жыл бұрын
It’s their 32”, they used to have it listed as a 30”, but have since changed it.
@73jch
2 жыл бұрын
Ok thanks got it
@TheBlueGarage
2 жыл бұрын
@@73jch you’re welcome! 👍🏻
@telos5247
2 жыл бұрын
Has anybody tried this with the 32” bar. I’m trying it now and it’s too long.
@TheBlueGarage
2 жыл бұрын
The one I installed is the 32”, when I purchased it, LASFIT had it listed as a 30” at the time. They have since corrected it on their website.
@codypaterson9139
Жыл бұрын
What’s up man! Great vid! I plan on doing the 32” Amber bar from Lasfit. Is there anything you would have done differently before I follow your vid step by step? Thanks man!
@TheBlueGarage
Жыл бұрын
Thank you! Yes, I would have used washers as a spacer instead of shaving down the shudders. I ended up taking a piece of plywood through the bottom portion of my grill a few weeks after installing and they had to replace the shudders, so I put washers in then. Other than that, everything else was the same.
@codypaterson9139
Жыл бұрын
@@TheBlueGarage Awesome man appreciate the feedback! 🙌🏼
@TheBlueGarage
Жыл бұрын
Anytime!
@jonnysandoval5586
2 жыл бұрын
do you need the mounts or it’s recommended ?
@TheBlueGarage
2 жыл бұрын
The light bar comes with mounts already, but you would need to drill holes for those. If you buy the mounts that I bought, then they bolt directly into the factory fitting.
@markhilsen2700
2 жыл бұрын
I tried to buy the brackets you used but they are not available. I fabricated my own and works great. I also have the dual RC grill mounted lights. Same switch operates the LasFit bar and RC lights👍
@TheBlueGarage
2 жыл бұрын
@@markhilsen2700 nice, glad you found an alternative. Did you install your Upfitter switches too?
@markhilsen2700
2 жыл бұрын
@@TheBlueGarage No. I just used the switch that came with the RC lights.
@TheBlueGarage
2 жыл бұрын
@@markhilsen2700 got ya, that’s cool that they are wired together.
@markschlemeil1219
2 жыл бұрын
Cool
@TheBlueGarage
2 жыл бұрын
👍🏻
@JJM24
2 жыл бұрын
Any idea if this works on an AT4? I know the grill is different but I’m wondering if it fits as well
@TheBlueGarage
2 жыл бұрын
I would think that it would. There was plenty of room for my Trail Boss, I doubt the AT4 is that much different
@JJM24
2 жыл бұрын
@@TheBlueGarage true, I appreciate the feedback!
@TheBlueGarage
2 жыл бұрын
Anytime
@trailbosschrispayne5454
2 жыл бұрын
Is that exactly a 30 in bar?
@TheBlueGarage
2 жыл бұрын
Yes, it is. Fits perfectly behind the grille. With the mounts in the description.
@trailbosschrispayne5454
2 жыл бұрын
@@TheBlueGarage appreciate it. Found a 31 in wonder if that’s any difference?
@TheBlueGarage
2 жыл бұрын
@@trailbosschrispayne5454 you might have to bend the brackets more than I did, which wasn’t much at all. But that could work more in your favor too, because it may hold the light bar further off of the shudders. So you might not have to shave those down at all. I could be wrong though, I barely had to sand mine down.
@trailbosschrispayne5454
2 жыл бұрын
@@TheBlueGarage appreciate it
@marklandry9345
2 жыл бұрын
Hey bro… are you returning your light bar or what?
@TheBlueGarage
2 жыл бұрын
What do you mean? I’m keeping my light bar, I love it! Where did you get that idea?
Пікірлер: 114