Thank you so much!! When I don't game to much 😜, I get up to stuff like this. 😁😁
@hrv-strijelac
Жыл бұрын
Very great video, send you my best Wishes and wish you a beautiful day!!
@stbladescorner
Жыл бұрын
Thank you so much!! Hope you have an awesome weekend!!!
@minimusmaximus9135
2 ай бұрын
use a electric fly trap with high voltage .is good.
@stbladescorner
2 ай бұрын
I did on the first one that I built, and put a bit to many volts through it, melted the whole thing. 😁
@oscarfernandomonfortepalac8327
Жыл бұрын
Hi, I'm new to your channel. I am from Argentina and I would like to make an applicator like yours. Can you tell me how I connect the HP cables, there are two that I don't understand how to connect them? I see one connected to the edge of the strainer but the other one that goes in the tube where it connects? Thank you very much and I hope you can help me. thank you very much
@stbladescorner
Жыл бұрын
Welcome to the channel. Pleasure, I will help. In the video the Anion generator has 2 HV cables that are white on the one side. On the other side there is the red and black wires, that is where you connect your power source. What you do is, you strip the insulation on 1 of the white cables and solder that to the strainer. The extra wire that I have coming out the side with the crocodile clip is not necessary. It is a discharge wire. The applicator will work without that. Enjoy building one!!
@oscarfernandomonfortepalac8327
Жыл бұрын
@@stbladescorner Thank you very much for your prompt response, I'll try to make one... Hug
@juanantonio2971
Жыл бұрын
Me podrías decir los dos cables blancos del generador si se conecta los dos juntos a la malla de metal?
@stbladescorner
Жыл бұрын
No. Sólo necesitas conectar uno de los cables blancos a la malla metálica. Gracias por ver.
@TheWookie_USN
Жыл бұрын
What did you connect the discharge alligator clip to during use?? Thanks.
@stbladescorner
Жыл бұрын
To nothing. I did use a piece of conductive wire when I was busy grassing an area, but saw that the discharge wire did not have any effect on the static grass. It does work, when I switch it off, and bring the alligator clip to the sieve you can see a small lightning spark between the 2. If I build another I will leave that discharge wire out of the build. Thanks for watching!!😎
@juanantonio2971
Жыл бұрын
Para que sirve el cable que sale por el lateral con la pinza de cocodrilo? gracias
@stbladescorner
Жыл бұрын
El cable con la pinza de cocodrilo se utiliza como descarga. Está conectado al cable de alimentación negativo (negro). La carga estática es tan mínima que no la necesitas. Simplemente no toques la malla metálica con el dedo. :)
@stevegriffiths566
11 ай бұрын
no comparison on wwscenics static grass applicator
Пікірлер: 21