The graphical representation of why the cut width will be perfect was better than a thousand words.
@clemmcguinness1087
7 ай бұрын
Mind blowing idea innit?
@jeffbaker8808
7 ай бұрын
Okay, I have watched EVERY woodworking video on KZitem and have never seen this method. I remember in engineering school how the simplest, most logical approach could often be the most elegant solution and this one is that. Great option for all shops, especially small ones. (Well, maybe not watched every video, but I have earned a Master of DIY from KZitem U.)
@1509alexe
3 ай бұрын
Brilliant! Just cut 7 equally sized bits of wood using this idea. You are a genius!!
@rufinocabrera8164
7 ай бұрын
Leonardo DaVinci once said, "Simplicity is the ultimate sophistication." This is the perfect example of that. What a great video, my friend. Thanks so much for sharing. Cheers!
@georgedeaney7270
7 ай бұрын
Nevermind the jigs etc, what interests me is the state of the tools etc in the background. This is a proper workshop with more than likely multiple jobs going on at the same time, hence stuff all over the place. In contrast to other KZitem "shops" where the tools are all on peg boards, racks of drills and more Festool boxes than Festool have in the warehouse, and not a pick of sawdust anywhere. I would show my bench if I could find it... Nice one Stuart.
@jessejameson154
7 ай бұрын
I couldn't agree more. I think all us diy and beginners should just instantly boycott and video that opens up with a shot of a guy or girl standing in a workshop with the wall behind them adorned with green and white from floor to ceiling. Let's start a movement 👍
@TheSudsy
7 ай бұрын
Haha noticed the Jacobs Crackers box under the shelf and thought "yup nice plastic bits box there with a lid!".
@michealhand1001
7 ай бұрын
Someone was explaining how much they made from You Tube videos and said all you see in the Background is Advertising for that particular company and they receive a fee for it.
@cuebj
7 ай бұрын
@@TheSudsy Mine's so old it's metal. Had various metal right-angle and expansion brackets in for about 50 years. A trusted old friend. I used half a dozen brackets from it just a few days ago for a temporary job before putting them back
@GeekRedux
3 ай бұрын
I thought the exact same thing.
@gregghernandez2714
7 ай бұрын
New subscriber here due to this video alone. As people from the U.K are so fond of saying "this is absolutely brilliant." I have a feeling you are going to disappoint some sellers who make those really expensive guides that attach to your track saw to make repeatable cuts. This is every bit as accurate, and so much cheaper too! Thanks so much.
@almusti
7 ай бұрын
Just commented exactly that! 😃
@gereon-gunterlamers6358
7 ай бұрын
Same here!
@TrophyJoe
2 ай бұрын
in my 50 years of working with Wood, I have struggled with this very same issue. Your solution is top notch. I wish that I had thought of it along time ago. Thank you.
@rickkinney1249
7 ай бұрын
i am 80 y o and i just learned something that i will use almost daily when i go into my hobby shop----thanx rick great video
@belindarrr
5 ай бұрын
I just used this trick to build 16 drawer boxes! I can’t thank you enough for sharing this!!!😊
@MrFoxLogan
7 ай бұрын
Never have gone to college, woodworking is self-taught. You pick up bad habits and lack a lot of tips, channels like yours help me improve myself and my works, thank you
@cuebj
7 ай бұрын
A bit unfair. Many college courses give students the space and facilities they don't have at home. Nowadays, college students also follow KZitem videos which keeps the tutors on their toes (many of the tutors also make YT videos). It's a pattern for all trades. Eg our regular heating and gas engineer is one of the few tradespeople we know who has a son going into the trade - getting all his certificates and watching videos and talkign stuff through with his dad who is, as a result, learning new relevant stuff too. A few years ago, YT vids were often unhelpful, dangerous, bad sound, bad lighting, bad camera angles but now we have good bandwidth and high quality productions
@MrFoxLogan
7 ай бұрын
@@cuebji think you misunderstood me, i meant it as me, i have never gone to college , im self taught,
@joshuaquick5511
7 ай бұрын
@@MrFoxLoganwhile I did go to college, it wasn't for woodworking. I am both self and YT taught. I initially got into it as a hobby for gifts but am now selling cutting boards alongside my day job.
@MrFoxLogan
7 ай бұрын
@@joshuaquick5511yeah youtube is great, although im self-taught KZitem has shown me some nasty habits I've been doing and also some safe shortcuts I should have been doing. You can always learn something new.
@alanwilkinson9487
Ай бұрын
As a child of the 60s,i hated woodwork at school, simply because the teacher didn't have time for us, it was a case of here's a piece of wood, and do something with it, I'm off the teach higher grade students, but now I love it, over the years I've done most of the carpentry in my houses, all self taught, from books, no you tube then, and I really enjoy stuff like this, I wish as a pupil at school we would have had this fella, who knows what I could have done, all it takes is a spark, and he has it in bucket fulls.. 😂
@travisjodyh.842
7 ай бұрын
Thanks, you just saved me money on a table saw. Great tip.
@mickeyfilmer5551
7 ай бұрын
What a brilliant tip. I have had a circular saw for at least 20 odd years, and it was always a pain to do repeat cuts. I shall never look back now I'm armed with this tip. Has to be one of your best so far!! Thanks for sharing it Stuart!!!
@mortenpetersen8888
7 ай бұрын
Brilliant, this limits the need for a tablesaw in a smaller DIY workshop, and I can make good quality at the same time. Thanks for sharing
@stephencave187
7 ай бұрын
That is bloody brilliant. So simple in design and use. But not as simple as me it seems ☺️ I love it. 👌🏻
@carllamb6711
7 ай бұрын
Thanks Stuart I’ve been a joiner nearly all my life and I didn’t know that……. I’ve learnt something today. Thank you😊😊😊😊
@chris-C8
4 ай бұрын
This has been incredibly helpful! My school cancelled shop class, so I lost my access to a table saw. I almost bought a contractor/job site saw, but luckily, I found this video, and now I don't need the extra expense. Thank you!
@Mal501
3 ай бұрын
A practical application of "the best measurement is no measurement at all". Very clever, and another step towards why I don't need to buy a table saw.
@richardwillson101
3 ай бұрын
Thank you, I'm not very experienced at working with wood and have recently purchased a circular saw. Trying to get consistent cuts is something I have been working on, but this method is great! I hadn't thought of doing it and will certainly be using it where precision matching is key. Thank you.
@fabiomerlin8820
15 күн бұрын
The kerf got me thinking when I built my jig for repeatable cuts. Thanks for the video.
@shastriramtahal7805
6 ай бұрын
Brilliant video. This should be taught by all teachers. Thanks.
@DivineMisterAdVentures
4 ай бұрын
JUBILATIONS OVERFLOWING! You've solved my problem! And a really big lot of good to you, sir!
@wellmadeinteriors
7 ай бұрын
12:54 This is genius. I have never seen any other videos like this super simple type of approach on making repeatable cuts Thank You Stuart
@seggremalac
4 ай бұрын
Ridiculously simple and absolutely clever method! I currently was thinking about a method as I am planning to make some kitchen cabinets to a friend and I only have a track saw. My ideas were overcomplicated and half this reliable. Thank you!
@nickshutte8369
7 ай бұрын
Brilliant method, especially for anyone whose workshop has a limited footprint or who does not have a table saw or even a track saw. Thanks! 😊
@anthonyfusco9768
7 ай бұрын
Incredibly simple and SMART! thank you for posting this. Hello from Canada.
@ParisCarpentry1971
Күн бұрын
I AM REALLY SURPRISED! Very very Informative! THANK YOU SIR!!
@leontejtelbaum1090
7 ай бұрын
I thought that I was watching your channel for entertaining only, but your trick for repeating cuts with a track saw is fantastic. You taught me something new. Thanks. Keep up 5he good work😊
@SmithyScotland
7 ай бұрын
Mind blowing. No measuring required. No expensive tiols required
@PhilipMurray-d3k
7 ай бұрын
I have watched a myriad number of woodworking and diy videos during my learning journey so far and yours are consistently the most well explained and considered however I would venture that this is possibly one of the finest, simplest and ingenious solutions to a perennial problem most diyers face. I tip my cap to you sir, bravo!
@billmartin4446
Ай бұрын
As a fairly new, though rather ancient, DIY-er, the hardest thing for me is to cut ply sheets perfectly straight, square and at accurately repeatable sizes. I've tried all kinds of things but keep having problems when using my circular saw for this kind of thing. This is such a great idea! Can't wait to try it out on the carcasses I'm building for a set of workshop drawer units. Your videos are really excellent and I can't thank you enough for what you do. 🙂
@kevintuckley4068
7 ай бұрын
Seriously, thank you. This was exactly the solution to the problem I was trying to solve this morning. Worked perfectly.
@cthulhugamete
19 күн бұрын
Definitely a keeper. Also, never knew Freud made a chop saw. Love their shop vacs, multi-tool, blades and router bits. Guessing the quality is the same.
@bradleytuckwell4881
7 ай бұрын
I must say I’m blown away by this simple jig yet so accurate I’ll be using this jig the only problem is every time I use it I’ll think of you and I don’t know if that’s a good thing or bad thing lol
@royhandley3133
7 ай бұрын
So obvious when you've been shown. Another excellent tip Stuart. Thank you👍
@rojascraftsman
5 ай бұрын
I love your ingenious to resolve situations without buying expensive (narcisist) accesories like TSO or UJK. Thanks for the video SIR.
@andreashenning7094
7 ай бұрын
Brilliant! So obvious once you see it, so hard to figure out by myself.. And as always, a pleasure to watch!
@EPortillo5000
7 ай бұрын
That's AMAZING! Never tough of making something so simple and effective.
@neilc6388
7 ай бұрын
Genius. Simple but effective.
@c.a.g.1977
7 ай бұрын
This is genius, Stuart! Definitely going to use this tip!
@EddyCarroll
7 ай бұрын
That’s a really elegant, simple solution Stuart. Excellent!
@FelixZolko
4 ай бұрын
genius!!!!!!!!!!!!!!!!!!! thank you. this is it. i kept thinking there has to be a better way of making repeatable cuts than measure draw line etc etc. i bought the kreg rip cut and its not very accurate/flimsy to hold. after scouring youtube, this is what i was looking for. its so simple but i would have never thoguht of it. like a mitre saw stop block oriented horizontally.
@andythompson2154
7 ай бұрын
Great video, very informative & basically explains the tips & tricks we've all been missing yet are staring us in the face. Cheers Stuart 👍
@Stewart_Bell
7 ай бұрын
Ooh it's a scribe! Excellent innovation! Straight to the top of the class!
@talleysuehohlfeld3959
7 ай бұрын
This is brilliant. I thank you so much. I only have a circular saw-no room for a table saw. And I always struggled with figuring out how to make all the shelves the exact same length! I’ve daydreamed adding a stop block to my crosscut jig, but this is SO much simpler.
@hbot404
7 ай бұрын
Simple and genius. I have the same lidl tracksaw and have thought about making a diy MFT but haven't made the plunge as my projects are few and far between. This is a great solution... quick to produce with scraps, no need to measure, no worry about being square. Bookmarked this one.
@truonggiang6130
6 ай бұрын
This blows my mind. Now I can sell my cheap table saw, which the repeatable cut is the only reason I keep it. Thank you.
@Tomoose1985
5 ай бұрын
Beautifully simple and elegant solution, I love it!
@Hollingsabre
7 ай бұрын
As a new track saw owner I appreciate these videos to help me become more accurate. I'd love a video on dust extraction management using multiple tools and types of shop vac options. Great work, thanks!
@SafetyCarrot
7 ай бұрын
Wow, I've seen people do this a lot but never actually tried it myself. Thanks that's very helpful
@harrytiplady7024
7 ай бұрын
Like it! I just completed my first cabinetry project. I made a simple jig for my circular saw to be used in combination with long straight edge like a level or similar. I ripped two small blocks of ply now to get the distance from outside of my saw bed to the blade on each side. I then used whichever one matched the directions I was cutting as a offset template to set the straight edge up parallel to a line and to run the saw against. With a thin pencil line this proved very accurate. I also used it to repeat cuts for multiple panels. Cut the first panel as above then lay this on top of the next, squaring up as many side as possible. Then use the offset template to setup the straight edge exactly along the cut line of the top panel. Cut along this line and the bottom panel (panels depending on depth limit of saw) will be near on exact to the top panel. Good enough for my diy project anyway! Love the videos!
@markhannan4712
7 ай бұрын
Thanks for that great tip I’m making some new kitchen units so will use this method. I’ve just bought the park side saw a bargain at £75 loving using it
@johnvodopija
5 ай бұрын
A cracking video! This method is pure gold and would have saved me a lot of headache last weekend. However, I have a similar project to complete this weekend and will use this tip guaranteed. Thank you for the superb content! Cheers 👍😎🇦🇺
@michaelplays2449
7 ай бұрын
Great video Stuart !!! Woodworking can become a very expensive hobby if you go down the branded name route , so its great to see videos like this, thay shows people very afforadable methods of doing woodwork as woodwotking can be a very good way of relaxing and dealing with stress related issues, well done and thank you !!!! 🙂🙂🙂🙂🙂🙂🙂
@ryanharriss7950
5 ай бұрын
I'm glad I discovered this channel. Very useful information.
@Quaker521
7 ай бұрын
Yes, Stuart, I've learnt something - thank you. A seemingly simple idea and yet brilliant! Thanks for the video.
@ilbelramirez9969
7 ай бұрын
You really took your sweet time getting to the point. But man I'm sure glad I stuck here to the end. Great tip. Great work man. Keep it up!
@tajnijjar20021
7 ай бұрын
wtf did i just watch. such an amazing video explaining such an easy way to make repeatable cuts. Thanks man.
@andyc972
7 ай бұрын
Proper Top Tip there Stuart - no-nonsense straight-forward and to the point - this will be really helpful to many makers although they may be disappointed that they don't "need" to buy more expensive kit ! Exact-e-mont ! 🤣
@edwardburroughs1489
Ай бұрын
Thats an elegant solution.
@jonathandent7916
5 ай бұрын
Having watched this a few times now, I get it! So amazingly elegant. I've had to draw a diagram of my own setup for my circular saw. In my case I will use the wide side of the circular saw for a guide as I have trouble keeping it square when I use the thin side, but perhaps the thin side works anyway because the saw has so much to lean on?
@MrBrut33
7 ай бұрын
Excellent, so well explained. Stuart I’ve been watching your channel for ages, never disappoints and always entertaining. Thanks for all your work.
@DeafMaker
7 ай бұрын
That is awesome and perfect timing, it is gonna be so useful in my next upcoming project making loads of shelves. So simple as well. Just brilliant 👏👏👏👏👏
@mattjones708
7 ай бұрын
Stuart....again so thorough with your explanations ! Thankyou mate.
@almusti
7 ай бұрын
This is absolutely brilliant. I wish I’d known about this when I was making a wardrobe with shelves. Simple but clever as well - a bit like myself without the clever bit 😅 thanks for sharing 👌🏻
@leticiaramirez827
2 ай бұрын
Wow, this is a great solution! Thank you for such a nice explanation!
@DesandSam
7 ай бұрын
Brilliant. Certainly adding that to the repertoire.
@boodori1210
7 ай бұрын
Best KZitem DIY video ever
@EugenioMatos1
4 ай бұрын
Really great way to replicate parts! Thank you so much!
@stephan935
20 күн бұрын
Thanks so much. Excellent idea and presentation!
@mariafhp
6 ай бұрын
Brilliant .. I’ve been looking for something like this . Great explanations . Can’t say I understood totally but going to look at it again ❤️
@QODQDJQ3232
6 ай бұрын
This video is very good. If you use the Kunlun tooth saw blade we developed, you can achieve higher results. The Kunlun tooth can make the upper and lower sides without chipping, bursting, or cracking.
@jaimegutierrez5125
6 ай бұрын
I was just looking for something like this. I´ve really enjoyed this video many thanks for sharing this information.
@adrian-mu3jr
7 ай бұрын
So simple that I didn’t think of it…Great tip
@mariocaceres5270
7 ай бұрын
Very clever. Simple yet effective. Thank you !!!
@whomadethatsaltysoup
7 ай бұрын
Fantastic! I actually made an mft style workbench years ago. Alas, I find it more annoying than useful. Inevitably, I cover it with a cutting board. I think the real benefit of this simple jig will be in cutting small stock that would otherwise be dangerous with a track or circular saw. Thanks for sharing!
@terrytopliss9506
7 ай бұрын
I did the same thing with an off cut of mdf and an off cut of ply which is 8ft long. Thanks for the video.👍👍
@jonathanstokes7791
7 ай бұрын
That’s genius! I’ll certainly find a use for this on a future project!
@dannybaker2763
7 ай бұрын
Ohhhhh, this one's gonna come in super useful, Stuart. Nicely done. Y'know the best bit is the simplicity of it, and yet I probably would never have thought of it until years down the line. I guess many of the best ideas are the simpler ones. Great vid!
@tomybino1426
4 ай бұрын
Why I did not see this before! Why I did not think about this??? I love you for this video ❤
@OriginalCatfish42
6 ай бұрын
So simple yet genius! Thanks
@darrenpaulgreen
7 ай бұрын
Very clever idea Stuart. I made an MFT but in honesty I hate the holes as they jus5 allow dust to build up underneath and I’m forever losing screws or small parts through them. Def going to give this a try. Looking cold in the workshop when you filmed this 🥶
@MoranGuyVideos
7 ай бұрын
Amazing video , where have you been ? if someone doesn't have a table saw this tip worth in gold.
@harkinjames
7 ай бұрын
Great tip Stuart, I’ll be keeping that one in my back pocket for when I need it 👍
@garyspencely8114
7 ай бұрын
Thanks Stuart. Like all the best advice, very simple and you wonder why you didn't see it before! Keep up the great work and keep the videos coming.
@pokeba3299
7 ай бұрын
Wow! You are really talented! I really enjoy this simple math application. So simple, so useful, so mathematic!
@pinkplonker8776
7 ай бұрын
I have made some parallel guides (3d printer and curtain rail) for my tracksaw which are great for larger sheets but I use this for smaller items. I don’t have a lot of faith in measuring off the splinter guard so I tend to take my measurements off the other side of the track and add the known width of the track to the cut. Great video, thanks.
@andymiller8677
7 ай бұрын
That is a gamechanger, thanks Stewart!!
@glennirwin4710
7 ай бұрын
Nice method
@davidsecker5161
7 ай бұрын
Well done stuart, a top tip.
@pedro-marques-jesus
7 ай бұрын
Excelent. Thank you for the idea.
@SamStGeorge
7 ай бұрын
I did learn something. And it is usefully All I can say is THANK YOU
@MiteshParmar
7 ай бұрын
What an amazing tip. Best one I've every seen! 👌🏾
@WoodworkJourney
7 ай бұрын
Fantastic! This is brilliant, thank you!
@johnmcauley7158
7 ай бұрын
That is so clever and so simple I’ll definitely be using this
@technopreneurialminds
6 ай бұрын
I need to set this up immediately at my shop!
@MarkSWilliams27
14 күн бұрын
Genius! I have to try this.
@mikeZL3XD7029
7 ай бұрын
Now that's using ya swede! (as my grandfather used to say) Thanks for passing this on Stuart, it's brilliant.
@johnpace5774
7 ай бұрын
Very clever, Stuart! Building an MFT was next on my list of to dos……..but I might just save myself some money. Thank you!
@twisterwiper
24 күн бұрын
Absolutely brilliant video. Subscribed!
@stevenwells5268
7 ай бұрын
Whale oil beef hooked !!! Going to cut myself one of those, super simples, but brilliant, cheers for the idea 👍👍
Пікірлер: 247