How to make the cooling system to cool the fan, can use 6-8 hours!
Make swamp cooler COLDER! can last 6-8 hours - Daddy's Tips
equipments
1 Submersible water pump AP600
c.lazada.co.th/t/c.223b
c.lazada.co.th/t/c.2a8P
2 copper pipes, 1/4 inch diameter, 6.35mm diameter, 0.44mm thick (thin type), 2 meters long, 2 coils
c.lazada.co.th/t/c.bXps
3 clear rubber hose 1/4 inch, 2 meters
4 foam box width 30 cm, length 45 cm, height 33 cm, 1 box
5 330ml. 20 bottles of water, 15% saline, frozen
6 temperature sensors
c.lazada.co.th/t/c.Y573
Normal cooling fan that uses water evaporation through paper honeycomb Will cool about 2 degrees
In this clip, we will install the water temperature reduction system. Come down to make the temperature of the wind blowing out more
We will take a bottle of frozen brine to cool. Which can reduce the temperature up to -10 degrees and use copper coil to help heat transfer
The results of the reduction try to find that it is quite satisfactory to some degree. The wind that came out was cold and can last up to 6-8 hours.
Now, @ Daddy's Tips channel has more channels to follow. There will be pictures, examples, behind the scenes and various tips that I found during the day to share. Follow below
instragram
/ daddy_tips
Facebook fanpage
/ daddytipsc
Twitter
/ daddytipsc
Can follow every channel
Let's talk at facebook fan page.
/ daddytipsc
Follow other clips at the link below.
kzitem.info?...
Негізгі бет Тәжірибелік нұсқаулар және стиль Make swamp cooler COLDER! can last 6-8 hours - Daddy's Tips
Пікірлер: 235