1st Comment! Love the vids, keep up the great work. : )
@amstudioprojects
7 жыл бұрын
Thanks!
@hansen9466
7 жыл бұрын
amstudio did you find me om steam
@francisweimer6320
7 жыл бұрын
is it possible to also use a 4/8 way joystick, cuz its much cheaper than the one you used? also keep up your vids!
@gigioconio
7 жыл бұрын
I did it today.... But with some little changes. The round zippy plastic cover I putted over the metal plate. But most important its a Oring of 25x3mm putted behind the joystick over the 2x4x8 plastic so the shifter get harder.. where I can send you photos?
@amstudioprojects
7 жыл бұрын
+Gigio Conio Nice work , you can send the pictures to my business email found on my channel.
@KimNabi_cat
7 жыл бұрын
OMG he's putting sim companies out of business! :)
@IBCMTB
7 жыл бұрын
No kidding!!
@gxtgaming8352
7 жыл бұрын
Love this setup! proof that you don't need an expensive rig to do some serious sim racing !
@DerGermanHD
7 жыл бұрын
Start your own Buisness and call it something like amStudios Sim Racing pls and you would get high up there
@godvsevolutionmythgodvsevo1038
4 жыл бұрын
So true
@garyrobinson7128
3 жыл бұрын
I got the parts today and it took 5 minutes to put together! works fantastic saved me lots of cash thank you!
@dahlinc
7 жыл бұрын
please start selling. we are all to lazy to do it ourselfs
@zomgdave
7 жыл бұрын
cha1k D for the love of all things please sell these
@bigsmoke6975
7 жыл бұрын
cha1k D So true
@souk-tv
7 жыл бұрын
lol..
@gushax
7 жыл бұрын
I would definitely buy this too.
@santiago3978
7 жыл бұрын
Please
@MyPAPAH1
6 жыл бұрын
Ordered this , got it, built it, took 15mins to build and bolt to table, many thanks amstudio
@yasmeenpathan6210
4 ай бұрын
Can you tell item names
@jus4027
Жыл бұрын
Dude, seriously good stuff, just watched your vids, 5 back to back. Love the usb convertors to abstract the logitech control away. Awesome.
@jesperpedersen8952
7 жыл бұрын
Maybe its about time i get myself a proper pc. I need this !! Nice vid mate
@tracksgaming1123
7 жыл бұрын
Finally!! I have looked forward to this video for so long. Geat work! KEEP IT UP!
@tracksgaming1123
7 жыл бұрын
I am just wondering about 1 thing: could u have connected the sequential gear the same way u did with the diy handbrake? By using a keyboard PCB? and what about a rig/desktop showcase video?
@amstudioprojects
7 жыл бұрын
Yes can use a keyboard PCB as well
@justinw852
7 жыл бұрын
you could also make this a handbrake
@Matthewrandone
7 жыл бұрын
i didnt get a notification for your upload :( awesome video im gonna defiently add this to the sim.
@herrlogan17
7 жыл бұрын
Just made it, 2 hours work. But only with wood and standard red ball stick, not as fancy as yours :) Thank you for the tip, actually this mame button set is lying under my table for couple of years! What was I thinking :)
@thoktrigg3308
2 жыл бұрын
Actually doing this rn and gonna laser cut a box to make it look good for my new setup (thx for the diy idea)
@kueto27
5 жыл бұрын
Eres un genio! he comprado hoy el joystick en ebay por 12€ y sustituire el encoder USB por un arduino leonardo que tengo, asi ademas hago la botonera y el freno de mano progresivo todo con un mismo circuito. Gracias y un saludo desde España!
@Lobbi_SM
7 жыл бұрын
As always, a very nice build! you deserve more subs man😆 you got great videos!
@dziga9629
7 жыл бұрын
Your setup is awesome!
@santosvandenbroek248
7 жыл бұрын
Can you put links to where you buy all of the stuff? Btw great video's man! keep it up!!!!
@StanleyKubick1
6 жыл бұрын
*videos
@ThePvthfinder
7 жыл бұрын
Making one of these too, at the end of the month! Thanks again AmStudio.
@3toinsanity
3 жыл бұрын
i made a sequential shifter using a keyboard i found at the thrift store. I've succesfully completed a fully DIY cardboard racing sim rig. using cardboard, hot glue, tape, a computer mouse (wheel) pedals (Bluetooth xbox remote) and shifter ($3 keyboard)
@vexedpixels
7 жыл бұрын
Can you make a video on Dials with (hands I guess) don't know the name. Like a real tach. Awesome vid man
@amstudioprojects
7 жыл бұрын
Sure thing!
@vexedpixels
7 жыл бұрын
amstudio tysm dude, that's awesome XD
@dustinryan6395
7 жыл бұрын
amstudio is it possible to wire a momentary switch to the square button on the Logitech g29?
@hansyang1697
7 жыл бұрын
Looks neat. Those extra micro switches can make a handbrake mod.
@tommywagner96
7 жыл бұрын
i love your vids, everything you do ends up with amazing and sturdy finish
@amstudioprojects
7 жыл бұрын
Thanks tommywagner96
@glgtv2144
7 жыл бұрын
Another amazing video bro! Instant sub!
@kratoz_858
7 жыл бұрын
thats a $30 kit. with 10 buttons incuded. you can also make a diy button box for your rig.
@turbodurbo666
5 жыл бұрын
that's what I was thinking!
@flippxisreal1648
7 жыл бұрын
This in indeed genius and great keep up the good work with them mods
@tigrast
7 жыл бұрын
good job with the sequential shifter 😉
@TheGoodMedicine
7 жыл бұрын
Keep up the good work, you are awesome.
@PlaystationProduction
7 жыл бұрын
*awesome work as usual*
@krastinsarturs
7 жыл бұрын
great video bud! hey was the M10 adapter custom taped for the joystick thread or were you able to order it somewhere?
@dra6o0n
Жыл бұрын
I was wondering, since the shifters basically is programmed to go up or a down a gear based on two button inputs, what if you turn those USB programmable keypads that are 2 buttons, into a lever based mechanism in a box? You could even use a gear or pulley system to mechanically move connected levers and joints to press said button, or it could be a 3d printed project. Something akin to those Sega Arcade driving shifters for Initial D. 3D print an enclosure, use more Springs and joints to determine how a lever moves and is pushed back to neutral.
@CSGtechnologies
7 жыл бұрын
Subscribed. Great job!
@JaMesBurnt
7 жыл бұрын
Great video man!
@aem_xx_5700
6 жыл бұрын
You rock man... Thank's for the good videos 👍
@amstudioprojects
6 жыл бұрын
Thanks!
@OrganizedReactions
7 жыл бұрын
cool. i'm trying to make one similar to your analog handbrake mod. just waiting for more parts to arrive in the mail.
@reezoosourryo6213
7 жыл бұрын
Man you are a god diy for sim racing im a french and i love you :) but the H-Shifter is the next ? :) :) Respect and continue you'r vidéo
@domenicoR_
4 жыл бұрын
Hello this shifter is compatible with thrumaster tmx?
@pirozcontractor6006
5 жыл бұрын
I finally completed this build! Thanks so much Except I really had no way of finding the screw thread so I just had to use one of the adaptors with my stick, hammer it in, and hope it stays (it still is). Pl can u link the screw thread adapter?
@andrewbonhomme8069
4 жыл бұрын
Yes I’m struggling to find that too. Stopped my build
@lksa983a
4 жыл бұрын
Did you mount that to the edge of the table and if you did then can you share how? Don't want to drill anything to the table so I was thinking about some sort of clamp setup but have not figured out a good solution yet.
@Supremoohh
5 жыл бұрын
I guess no problem to connect it with arduino instead an arcade usb interface right? Great channel,love to see more projects in future (I also have an E36 dash on the way :D). Ty for sharing!
@ryantipsord1863
6 жыл бұрын
I know you didn’t used to do voice overs. But now could you put a transcript in the description of what you would have said on your older videos.
@stantonlagua308
4 жыл бұрын
so awesome! im going to build this. how did you mount this?
@denniswilson372
4 жыл бұрын
im about to start this actually...so this will work with thrustmaster as well..you will have to take the wheel apart and solder the switch wires to the corrisponding shift paddle..but really do able. i'll respond when im done...
@SimRacingwithAussieStig
7 жыл бұрын
Cool mate, cheers, AussieStig
@brunocosta8842
7 жыл бұрын
great work! thanks a lot a love your vídeos.
@FreakCanal
7 жыл бұрын
A video about screw and unscrew. Amazing
@Kid_Strange
Жыл бұрын
Hey! I was wondering if you still had this shifter and if it would be possible to get a couple of pictures showing where you tucked the board and how you mount it. Also was wondering where did you get the plate for it?
@ryder2621
7 жыл бұрын
Wow man! you are king! +1sub
@douglasSN1
7 жыл бұрын
I use the same system to make a hand brake, but it does not work at all games. Could you explain how to make it work with g27 / 29 / etc?
@chocolatepuro9329
7 жыл бұрын
Magnífico! Como todos tus trabajos. Diseños muy cuidados y sencillos. Enhorabuena!!
@user-pc4nq4tv1h
7 жыл бұрын
Nice video again. I got a question, not about this thing but in general. Which GPU do you have? Maybe I want 3 monitors for racing too.
@COBECTb__
7 жыл бұрын
Thanks for video and your works. A finger in top!!!!
@francismaheu158
6 жыл бұрын
Been searching for the "M10 bolt with taped thread - M6x1 internal" for weeks. Does anybody know where to find one? I got all the parts except that one and I'm going crazy.
@joshandrew9067
4 жыл бұрын
make one
@billyring9803
7 жыл бұрын
found you on reddit. Subbed!
@hansen9466
7 жыл бұрын
Awesom. Keep up the good vids
@danielesse8728
6 жыл бұрын
Hi! thanks for your video! Could you tell me what tipe of gear shift extender I need?
@SikkRaz3r
4 жыл бұрын
Did you find it lol?
@RamjetX
7 жыл бұрын
Hats off... great idea.
@user-pc4nq4tv1h
7 жыл бұрын
How did you mount your projects to your desk/monitor? I made the sequential shifter recently , but I can't mount it easy to my desk.
@djkasio
6 жыл бұрын
Same here
@eduardotejeda
6 жыл бұрын
Try C clamps.
@FedorBykonya
6 жыл бұрын
make karting wheel please! awesome work
@PPablinho
7 жыл бұрын
Now i need to find that gate for the joystick
@jonlamontagne
4 жыл бұрын
A few of the pieces are no longer available from the links you provided is there a chance we could have a parts list and go searching for them as well? Thank you for the video, help and your time!!!
@danieljoetantobr
3 жыл бұрын
I've done mine, thanks a lot!
@jbank4394
6 жыл бұрын
Hi imterested in using this for my Logitech G27 sequential shifter. I already know where to solder onto the G27, but on the joystick I was trying to figure out where would my soldering points would be, but i guess i can just connect the wires like you did in the video, and then just solder them to the G27.
@Renagade9966
7 жыл бұрын
Next DIY 3 monitor stand ... those are way to far from your wheel to get a good FOV. all you other stuff is really nice. I would make them if I knew where to get all the pieces.
@Bananovskyyy
7 жыл бұрын
now H-pattern plus clutch pedal?
@androiduseriosfighther5610
7 жыл бұрын
Bananovskyy he has a clutch and h shifter, he make a sequental shifter. if he drive he used homemade sequental shifter and clutch
@kimchun5467
3 жыл бұрын
Thanks made this and works great
@Wetfingers
6 жыл бұрын
How did you mount it? That’s the only issue holding me back right now 😫
@muhammadzihni3801
6 жыл бұрын
Same here... :(
@angryguy6624
6 жыл бұрын
lol wetfingets xD
@Wetfingers
6 жыл бұрын
Angry guy what’s up haha
@basstrammel1322
6 жыл бұрын
I would use the bolts holding the carbon fibre cover? Or maybe the two holes in the metal plate.
@theonlykolos
5 жыл бұрын
Did you have to program/wire it to a specific button or it automatically knows it’s a shifter*?
@josephzee
7 жыл бұрын
Great just fantastic , could you please da a video on how to wire / solder the correct way rotary dials , / to a board , I always get confused when I do it , thank you very much love your work .:)
@ChungWick
7 жыл бұрын
Love this! Great work! Could you make a PS4 version tutorial?
@SimonVdD
7 жыл бұрын
Can you make a handbrake out of this ? And what is the thing you plugged the cables in ?
@amstudioprojects
7 жыл бұрын
Yes it could be used as a basic handbrake. Plugged into a USB zero delay encoder.
@SimonVdD
7 жыл бұрын
Can you plug the USB port in a PS4 and use it with the wheel ?
@TenkaraOnTwo
7 жыл бұрын
Wondering if you ever gave this a shot with the PS4?
@fudd
7 жыл бұрын
SimonV did you ever try it with the PS4?
@fudd
7 жыл бұрын
SimonV did you ever try it with PS4?
@rubialex99
6 жыл бұрын
That handbrake is great...
@owenatkin3148
5 жыл бұрын
Where do you get the adapter for the shifter handle?
@owenatkin3148
5 жыл бұрын
I think I found a suitable fitting. Not sure, might have to have it machined
@CrazyOldGamerLive
3 жыл бұрын
Love it, but why go thru the trouble of removing the switches instead of just leaving them disconnected?
@SMFaction
10 ай бұрын
This is great, does anyone have a link to the extension bolt he adds at 3:15?
@paulcallaghan3774
7 жыл бұрын
Is soldering something like this into the g29 pretty straight forward? I have a PS4 and not a PC so I doubt USB devices will work in the same way which means I'd have to incorporate them into the G29. I have watched a few of your videos and am being inspired to better my own setup using your methods.
@oze-bikes4life663
4 жыл бұрын
Very Nice Build 👍🏼, do you "have another link" for Gear Shifter Knob & Carbon Fibre Plate ??
@jamesbehra2690
4 жыл бұрын
Awesome job. The Carbon plate link is no longer available any clue where to find it? Also would you pls tell me how did you sitck the joystick to the desk? Cheers!
@xXR4MOXx
7 жыл бұрын
Amazing! Thank you
@botbelem
7 жыл бұрын
Please show how you set the shifter on table
@murph199
6 жыл бұрын
What do you think about your Logitech shifter in comparison to this one? I’m looking to get a shifter and would like it to be sequential so I would end up modding the Logitech. Thanks for your input!
@gnokketto7423
7 жыл бұрын
Great! support for mounting at desk or Playseast ?
@iambradderzq2
Жыл бұрын
Could you make a handbrake like this
@dsoms
4 жыл бұрын
@amstudio Amazing! Nice work. I own the Logitech G920, do you know if it's possible to wire the paddle shifter buttons in the PCB to be used with this shifter? I know it's possible to wire some other buttons but not these ones. Thank you!
@maddog3814
7 жыл бұрын
Hi, can tell me where i can buy the extension male female for gear knob? Thx.
@AlphaM0dZ
7 жыл бұрын
just wondering where you found the bolt adapter so easily
@danielhardwicke01
7 жыл бұрын
look at honda gear stick extension they are m10 and loads of options.
@AlphaM0dZ
7 жыл бұрын
Dwick awesome thanks
@amstudioprojects
7 жыл бұрын
I made the adapter, decide which gear knob you are using first as there is a few different thread sizes and pitch.
@AlphaM0dZ
7 жыл бұрын
just wondering is it the arcade joystick that is m10 or the part that you screw the shifter knob on cause i was looking at the honda shifters an those are m10 and just need an extension then
@soba5118
6 жыл бұрын
m oltmanns S
@blockfifteen
7 жыл бұрын
please post an entire setup video PLEASE
@Pas31Ta
6 жыл бұрын
Amstudio creates other things, you're very good.
@biggybalbosa784
5 жыл бұрын
How is this being mounted?
@ExtremelyFancyMan
4 жыл бұрын
please tell me you now know
@damongill1120
6 жыл бұрын
Where did you get your bolt from to extend the shaft height?
@MsLeboxeur
7 жыл бұрын
super !!!! nice !!!
@paullenz7617
5 жыл бұрын
What thread size is the mountig for the shiftknob Did you made the adapder by yourslef
@efekeserci4710
7 жыл бұрын
i love your vids. nice and quality. please make e-shifter :)
@adambrown209
7 жыл бұрын
Is there any alternative to the Joystick? If not, is there any specific one you recommend?
@SimonVdD
7 жыл бұрын
Zippyy joystick
@digarivas
6 жыл бұрын
You can do the handbrake but with two switches.
@markust.9948
7 жыл бұрын
Hey! Love your videos! But I have a quick question, can you sell these things? Because i'm interested in the handbrake and the speedometer!
@TheToxicToyz
7 жыл бұрын
nice like every time...! WE WANT MORE !!!! LMAO
@amstudioprojects
7 жыл бұрын
Thanks ThomaZ
@nettval4765
6 жыл бұрын
I just made it by myself i bought the joystick that you said and it worked! pretty well but the joystick comes from china?!
@k-dog495
7 жыл бұрын
Loving you video's, great work :) Out of interest, what monitors are you using there, the thin bezels are very nice!
@amstudioprojects
7 жыл бұрын
Thanks, using 27" LG IPS LED Monitors
@Eduardog1975
Жыл бұрын
How many digital inputs can have a Arduino nano, I want mean with any tecnique like multiplexado or other
@minimale
7 жыл бұрын
Thanks for sharing!! Awesome work as usual! When i'm done with the handbrake i'll start with this one!!
@morbid1.
7 жыл бұрын
can you turn that joystic into hand break? In theory you just block 1 additional way of movement leaving only back
@amstudioprojects
7 жыл бұрын
Sure can, You will need to block or make a new one way bottom plate.
Пікірлер: 432