Im really impressed with your fenders. You did a really good job building them. I'm proud of you .
@marsbase3729
4 жыл бұрын
This was a great idea, but 3:00 is really cringy. Just a friendly safety tip, hold it from the top side or place it over a board or something to drill or moments distraction can leave you with an injured hand.
@fastsayan2883
3 жыл бұрын
kzitem.info/news/bejne/wmirzo2Vp3WWY5w check this one out it was a neat and easy fender!
@goedelite
7 ай бұрын
Where I live, in west-central Florida, there is no source of 2.5 inch PVC pipe in six or eight foot lengths on the shelf. One can order it in ten foot lengths (which means wasting half of it), but then there are shippping charges. The materials cost of such a project alone makes it uneconomical. Until I find a reasonable answer, I'll bike in the sunshine only.
@dimond1806
5 жыл бұрын
Great job and good idea. This is what I will be doing because I can't find anything that will fit my needs with out paying a lot of money.
@fastsayan2883
3 жыл бұрын
kzitem.info/news/bejne/wmirzo2Vp3WWY5w check this one out it was a neat and easy fender!
@tmark9019
4 жыл бұрын
Thank you Albert. Great idea and instructions. !
@fastsayan2883
3 жыл бұрын
kzitem.info/news/bejne/wmirzo2Vp3WWY5w check this one out it was a neat and easy fender!
@stevejacobson7819
Жыл бұрын
Great idea, thank you for sharing this. I will probably be using this method soon here in Minnesota.
@miguel360kmc
4 жыл бұрын
Very very smart idea. I been researching fenders for my gas bike hard to find a set that works with disc brakes and is safe this looks great lets you get the prefect fit for your bike your build love it..
@fastsayan2883
3 жыл бұрын
kzitem.info/news/bejne/wmirzo2Vp3WWY5w check this one out it was a neat and easy fender!
@fastsayan2883
3 жыл бұрын
kzitem.info/news/bejne/wmirzo2Vp3WWY5w check this one out it was a neat and easy fender!
@KaiTenSatsuma
3 жыл бұрын
Pretty damn good, I was thinking of doing something similar with some leftover PVC I've got now that we're headed into Wet and Cold season here too. I'd need something shorter since I don't have a rack but I do have L brackets that I used to use for front and rear reflectors which have become redundant since I've bought flashy lights that bind onto my seatpost and handlebar.
@fidaglobal
2 жыл бұрын
You have wonderful idea and execution.
@johnjeromson3471
5 жыл бұрын
that's a great idea and has inspired me to try it, thank you.😊😊😊
@fastsayan2883
3 жыл бұрын
kzitem.info/news/bejne/wmirzo2Vp3WWY5w check this one out it was a neat and easy fender!
@Bogsyism
4 жыл бұрын
Thanks Man, Great video with fantastic tips for saving a fortune. 😜🚴
@fastsayan2883
3 жыл бұрын
kzitem.info/news/bejne/wmirzo2Vp3WWY5w check this one out it was a neat and easy fender!
@youngEURO1992
3 жыл бұрын
this is true talent and skill, very inspiring my friend!
@theleafsprungjeeper
2 жыл бұрын
Great job!
@NazD10
2 жыл бұрын
nice to see such wholesome content
@robinrai4973
2 жыл бұрын
Really well done man
@TM-we6eg
Жыл бұрын
Good job and being creative. Thank you for the video.
@racepnd
5 жыл бұрын
Great job!!
@fastsayan2883
3 жыл бұрын
kzitem.info/news/bejne/wmirzo2Vp3WWY5w check this one out it was a neat and easy fender!
@futurerides3376
3 жыл бұрын
Napakatalented mo naman idol...siguro kaya mong gawin yung onyx rcr design pero made in philippines..magaling ka mag welding at wiring.
@juliouchimura3753
2 жыл бұрын
Thanks for the useful tutorial.
@edheide7229
5 жыл бұрын
Good job Albert.
@fastsayan2883
3 жыл бұрын
kzitem.info/news/bejne/wmirzo2Vp3WWY5w check this one out it was a neat and easy fender!
@MatthewEng2593
3 жыл бұрын
Nice i really like this idea
@masterofbeastofgames
10 ай бұрын
Oh my I love my new bike used to ride everywhere in Florida ...
@jacobtokarz2889
Жыл бұрын
great video!
@kaushikkalita7310
2 жыл бұрын
you have a very creative mind
@TheIndustrialphreak
3 жыл бұрын
I have an ONYX RCR, need something like this. How did it hold up these last two years?
@aliasgher6672
5 жыл бұрын
Amezing bro nice
@fastsayan2883
3 жыл бұрын
kzitem.info/news/bejne/wmirzo2Vp3WWY5w check this one out it was a neat and easy fender!
@ryanc2115
2 жыл бұрын
galing mo sir. great content!. straight to the point at walang mga jologs na " yo wassap guys.." na intro.
@albertnario4877
2 жыл бұрын
kelangan ba yun, haha.
@ryanc2115
2 жыл бұрын
@@albertnario4877 haha exactly!!
@pu4fabfoxalfabravo2
5 жыл бұрын
fltou capricho e acabamento mais muito legal a ideia
@fastsayan2883
3 жыл бұрын
kzitem.info/news/bejne/wmirzo2Vp3WWY5w check this one out it was a neat and easy fender!
@marsbase3729
5 жыл бұрын
awesome video! you gave me an easy way to make my fenders. Thanks bro! 👍 😎 👍
@fastsayan2883
3 жыл бұрын
kzitem.info/news/bejne/wmirzo2Vp3WWY5w check this one out it was a neat and easy fender!
@demoncustoms4014
2 жыл бұрын
Good job ❤️
@bsdcreative911
Жыл бұрын
Wonderful job you have done 👌🏻👌🏻👌🏻🌝🌝
@chimp1893
5 жыл бұрын
Pre galing mo wala akong masabi
@fastsayan2883
3 жыл бұрын
kzitem.info/news/bejne/wmirzo2Vp3WWY5w check this one out it was a neat and easy fender!
@manuelcastillones1126
3 жыл бұрын
@@fastsayan2883 10 percent of mud goes to your fender, 90 percent goes to your back and head😂
@fastsayan2883
3 жыл бұрын
@@manuelcastillones1126 ? fam google this: 'what is a good joke to dis someone off of on a youtube comment as my jokes are cringy and shit af'
@JustinAndNicoleAdventures
Жыл бұрын
This is nice super nice idea
@alvinjosebasa1158
2 жыл бұрын
Ang husay! Parang gusto ko nalang magpa_gawa sa 'yo! :)
@FortheLoveofCycling
Жыл бұрын
Very nice.
@dedyprojectchannels578
2 жыл бұрын
Very...very....very...Amazing 👍👍👍👍👍
@jorgen.zamora
4 жыл бұрын
Nice!
@fastsayan2883
3 жыл бұрын
kzitem.info/news/bejne/wmirzo2Vp3WWY5w check this one out it was a neat and easy fender!
@mariobarcelon7226
3 жыл бұрын
Ganda ng hookworm tires mo.
@sweetsendaedreamr
4 жыл бұрын
thanks man!
@fastsayan2883
3 жыл бұрын
kzitem.info/news/bejne/wmirzo2Vp3WWY5w check this one out it was a neat and easy fender!
@shivamshrotriy
4 жыл бұрын
Awesome. This literally is the only good tutorial
@fastsayan2883
3 жыл бұрын
kzitem.info/news/bejne/wmirzo2Vp3WWY5w check this one out it was a neat and easy fender!
@CarlosGutierrez-qy3lv
Жыл бұрын
Le doy mil puntos a tan buena idea 👍
@Bogsyism
4 жыл бұрын
Albert you are a f***ing genius. thank you for this great tip.
@fastsayan2883
3 жыл бұрын
yo check this one out it was neat
@zachguevara
5 жыл бұрын
Nice totoy bibo!
@fastsayan2883
3 жыл бұрын
kzitem.info/news/bejne/wmirzo2Vp3WWY5w check this one out it was a neat and easy fender!
@emdadulhaque7286
3 жыл бұрын
Amazing
@LvlUp.
2 жыл бұрын
Good for the streets but if the mud comes you would not have enough clearance. But anyway a great job
@rimbang_
5 жыл бұрын
I wait for you making Drift Trike With Hoverboard
@fastsayan2883
3 жыл бұрын
kzitem.info/news/bejne/wmirzo2Vp3WWY5w check this one out it was a neat and easy fender!
@vkeditingjnp570
5 жыл бұрын
Thanks bro
@fastsayan2883
3 жыл бұрын
kzitem.info/news/bejne/wmirzo2Vp3WWY5w check this one out it was a neat and easy fender!
@vuelvedios5501
2 жыл бұрын
muy bien
@amandahitomi2033
3 жыл бұрын
OOWWWW 👏🏻👏🏻
@64maxpower
2 жыл бұрын
That different. Pvc in the US is white. I've never seen it come in that orange color. What diameter pipe should I begin with? Good job
@luisaguilar6672
2 жыл бұрын
De todos los guarda barros caseros que he visto ( vídeos) éste me parece mejor , porque protege más, ya que cuando te diriges hacia el trabajó surgen muchas charcas, mas en la época de lluvia. Gracias por su valiosa información, me he suscrito a su canal y tiene mí 👍👍👍👍👍👍👍 un cordial saludo desde la distancia, de un pequeño país llamado EL SALVADOR 🌎 ✋✋✋✋✋✋✋✋✋✋.
@felipezapata9867
Жыл бұрын
Amigo disculpa tu sabras que medida de tuvo fue usado aqui
@einnarrodriguez4027
Жыл бұрын
Parece un tubo de 1 pulgada y media, ya que es la medida más intermedia, 2 pulgadas sería un tubo muy grande, aunque experimentando y cortando se puede verificar, saludos
@kalensantana86
Жыл бұрын
Me iso acordar de aser le a la mía de tubo de plástico de pvc así le voy aser gracias
@wojciechwybieralski
5 жыл бұрын
One of the most ecological canal on youtube :) something from nothing
@fastsayan2883
3 жыл бұрын
kzitem.info/news/bejne/wmirzo2Vp3WWY5w check this one out it was a neat and easy fender!
@gamingwithsanju4248
5 жыл бұрын
Bhai mere it bhi bure din nahi aye ki ek mudguard ke liye pura cutter kharidu🤣🤣
@fastsayan2883
3 жыл бұрын
kzitem.info/news/bejne/wmirzo2Vp3WWY5w check this one out it was a neat and easy fender!
@ohcrapwhatsnext
2 жыл бұрын
Filipino ingenuity?
@intelligentph3467
3 жыл бұрын
Your Filipino 🇵🇭
@markmalana7877
Жыл бұрын
Mas maganda sir kung medyo binilog nyo yung dulo
@kalmadongronniekalmado1539
Жыл бұрын
Pwedeng pagawa
@manuelpena8981
3 жыл бұрын
Albert narìo sana kapitbahay lang kita
@albertnario4877
3 жыл бұрын
may bakanteng lote sa tabi namin.. 😅
@YouTubePluto12
3 жыл бұрын
i khow you are Filipino
@sonishakya4879
3 жыл бұрын
If you don't know how to speak English so please use hindi after all very good idea
@eugenfendel8425
4 жыл бұрын
keine angst das dir das fahrrad auseinander fliegt? so wie du die hinterrad speichen verlegt hast
@fastsayan2883
3 жыл бұрын
kzitem.info/news/bejne/wmirzo2Vp3WWY5w check this one out it was a neat and easy fender!
@mariobarcelon7226
3 жыл бұрын
Pinoy ka bro?
@melbabungcayao4693
3 жыл бұрын
V
@acostacleevideovlog6477
Жыл бұрын
location mo paps
@KubotaManDan
4 жыл бұрын
Pretty hokey look'n, I'd be embarrassed to use that
@fastsayan2883
3 жыл бұрын
kzitem.info/news/bejne/wmirzo2Vp3WWY5w check this one out it was a neat and easy fender!
@qball6520
4 жыл бұрын
Start the clown music
@fastsayan2883
3 жыл бұрын
kzitem.info/news/bejne/wmirzo2Vp3WWY5w check this one out it was a neat and easy fender!
@robertwong2412
5 жыл бұрын
I will not heat up pvc plastic like this. They're toxic to breath.
@fastsayan2883
3 жыл бұрын
kzitem.info/news/bejne/wmirzo2Vp3WWY5w check this one out it was a neat and easy fender!
@nottigerking9586
Жыл бұрын
dudes cooking pvc pipe on the stove.. ... wow......usea heat gun
Пікірлер: 114