This might be different for different synth(cause different importing algorithms), but Serum's manual says, that it is best to import wavetables into Serum, that play the note F#0. Don't know why it is like that, but wanted to throw it in as knowledge for others.
@VenusTheory
3 жыл бұрын
This is actually correct! However, it does depend on your project sample rate to get the best results which is why I left that 'standard' out because F#0 is assuming you're using a 48k sample rate. In case you're curious, here's a full recommended list: 44100: F0 48000: Gb/F#0 88200: F1 96000: Gb/F#1 176400: F2 192000: Gb/F#2
@mdh1483
3 жыл бұрын
@@VenusTheory That's good to know too, ty.
@Parawaveaudio-com
3 жыл бұрын
48000 Hz / 2048 samples = ~ 23,4375 Hz F#0 is around 23.12 Hz. If you really want to hit the exact wave cycle you can even tune your oscillator to the precise cent value. 2048 because most FFT algorithms (which all wavetable synths use) work faster on a power of two frame size. Anyway: As long as your synth import algorithm is resampling the waveform it doesn't really matter :) I would say , the lower the better.
@NaviRetlav
3 жыл бұрын
@@Parawaveaudio-com Why not 192000 / 2048 = 93.75 = F#2 plus 23 cents ?? That's probably the closest you can get. The only question left is, what tempo and loop length I need to make it 256 frames ? :)
@Parawaveaudio-com
3 жыл бұрын
@@NaviRetlav It doesn't really matter, you just increased the sample rate times 4. The actual frequency ratios stay the same. Here is a nice online converter www.sengpielaudio.com/calculator-centsratio.htm The "Frequency to musical note converter." Enter 23.4375 Hz; What note is this? It's F#0 + 23.25 cents offset. Record in the sample rate you're comfortable with and make sure there are not missing harmonics or unwanted aliasing artifacts when playing it back. Recording the precise amount of tables is another topic and really annoying to set up, since you need fractional BPMs or alternatively set up the recording duration in a sample exact manner.
@speeluh
2 жыл бұрын
Man, you can make millions because of your beautiful, low and warm voice! Sometimes and don't listen to what you say just enjoying your voice!! 😃😃😃
@Parawaveaudio-com
3 жыл бұрын
Importing the result and creating a new wavetable from it. Quite the wavetable-ception. We have to go deeper!
@VenusTheory
3 жыл бұрын
That's the super l337x h4x0r trick. Rapid is almost too good.
@olymoon2008
2 жыл бұрын
Sir, you're a gold mine. Thank you so much for sharing your knowledge.
@JeiShian
3 жыл бұрын
This is a pure gold. I never knew this could be so easy. Thanks!
@VenusTheory
3 жыл бұрын
For sure, figured it'd make for a great video since the process is really immediate to get started with once you know the basics. Happy noisemaking!
@fuglbird
Жыл бұрын
To get sounds like that I just record my old radio while operating the tuner feverishly.
@rexcellencemagee6729
Жыл бұрын
Thank you Cameron! That was very helpful!
@David3Wise
2 жыл бұрын
Thanks for that - works a treat in Kontakt
@patcupo
3 жыл бұрын
Good timing. Bitwig just announced Polymer and a wavetable module for The Grid.
@ragnarroeck
3 жыл бұрын
The Beta is out, if you have an active subscription you can test it.
@VenusTheory
3 жыл бұрын
Ooooooooooh. Looks like I'll have to grab the beta this weekend if I remember!
@zeridium9129
2 жыл бұрын
Great stuff man!!
@danielgiaccio1034
2 жыл бұрын
epic!!!
@jameshutchins7042
3 жыл бұрын
Once again brillant. Time to go make a ton of wavetables.
@VenusTheory
3 жыл бұрын
Have fun!
@jameshorton7651
Жыл бұрын
Sick my dude I know it's 2 years old but I was about to make a video myself about this. I still may but it's a good job
@Schall-und-Rauch
2 жыл бұрын
Thank you very much, I will try and import these into my Eurorack modules.
@TempisOfficial
3 жыл бұрын
Spicy
@DaveFore_AudioEngineering
Жыл бұрын
Thanks!
@DataBroth
3 жыл бұрын
I was just thinking of making a video like this last night
@megatron804
3 жыл бұрын
do it with surge would hit tons of views
@DataBroth
3 жыл бұрын
@@megatron804 I don't think surge has a very good wavetable engine and would not recommend making tables with surge. I might still do mine, cus I have a couple more tricks I use. It will be different
@AChi__
3 жыл бұрын
Excellent stuff. Thanks for sharing your knowledge 👍🏽
@VenusTheory
3 жыл бұрын
Glad it's helpful!
@eliaszerano3510
3 жыл бұрын
The easiest way to create wavetable in my expereicne is just using VPS Avenger.
@MLE-fm4ox
2 жыл бұрын
How you do that?
@ftgmusicstation491
3 жыл бұрын
I loved it.
@JamesRamboPearce
3 жыл бұрын
Love this one! Niceee one dude
@VenusTheory
3 жыл бұрын
Glad to hear it!
@Jason75913
2 жыл бұрын
extremely helpful Do you have a video on how to get usable sounds out of wavetables utilizing wavescans? Doesn't matter what synth you use for it.
@TitoSilversax
3 жыл бұрын
The synthgeek with the golden voice
@VenusTheory
3 жыл бұрын
🙌
@earthlyng_official4599
3 жыл бұрын
morning coffee while drinking coconut water lol.. classy hahah
@Korvmannen
3 жыл бұрын
Not sure why the volume is so low in your videos, but this is really helpful. Short and concise
@VenusTheory
3 жыл бұрын
It shouldn't be, KZitem normalizes audio so it should be the same as any other video 🤷♀️ Glad the video was helpful!
@mageprometheus
3 жыл бұрын
Thanks, Cameron. The dislike was from someone who creates wavetables for a living. 😃
@VenusTheory
3 жыл бұрын
11 WAVETABLE SECRETS EXPOSED - YOU WON'T BELIEVE #4 😲
@TheGhostRecordsChannel
3 жыл бұрын
Cool! I don't know if this can fit to my genres but I'm totally sure that I will use that soon , thanks ahahah ❤
@Almanacs
3 жыл бұрын
Terrific! Gonna try this on Pigments.
@VenusTheory
3 жыл бұрын
Enjoy! Pigments is also great for creating them too with the different phase distortion and wavefolding stuff!
@NigelMerrick
3 жыл бұрын
Awesome tutorial, thanks, will be trying this one out today to create some wavetables for Serum, Pigments, and Dune 3. Cheers from Memphis, and hope you folks had a blast and fun time on your honeymoon :-)
@VenusTheory
3 жыл бұрын
Ayyyyyyyy thanks! Good times for sure. Happy noisemaking! It's really easy and a lot of fun to get some new sounds out of your favorite synths. Don't sleep on the Wavetable editor in Dune as well if you haven't tried it much, outside PhasePlant it's probably one of my favorite editors.
@NigelMerrick
3 жыл бұрын
@@VenusTheory Cheers, Cameron, I haven't really played with the Dune WT editor a whole lot yet, but it does look cool and (more importantly) useful. Happy music making to you too :-)
@Collectively_Adrift
Жыл бұрын
@@VenusTheory Can you export phaseplats tables??
@bastosel1125
2 жыл бұрын
Good stuff as usual 👍🏻 I have a question for surge users, when I do my own wavetables Surge automatically skew the audio file from A to B and don’t stay on one frame. Somebody have an idea how I make it stay on the same frame ? Thx 😊
@Artek604
3 жыл бұрын
1:03 which Surge skin is that? I d/l latest version few das ago and I'm sure it wasn't there.
@jamesjr2550
3 жыл бұрын
Yeah its the latest version 1.7.1
@Artek604
3 жыл бұрын
@@jamesjr2550 Thanks!
@VenusTheory
3 жыл бұрын
Yo! That is the Dark skin which is included with the newer builds!
@eren3390
Жыл бұрын
When i do it it pulsates? I can’t play it on c0 i don’t get sound (i‘m on fl)
@midhunm343
3 жыл бұрын
How is mixcraft for professional use
@VenusTheory
3 жыл бұрын
I think it's a great DAW! I don't think any DAW is really better than any other for 'professional' use. Anyone can make a pro track in any DAW as long as they know what they're doing I think. In the end, it's just about finding whatever DAW is best for you and your style and workflow.
@BrewskaySA
3 жыл бұрын
Wait I am new to the channel and just wondering but does Cameron actually have a coffee named after him because of his awesome music capabilities or is he named after the coffee? hmm 🤔
@VenusTheory
3 жыл бұрын
Sadly no 😢 But I've been drinking Cameron's coffee since like middle school because obviously it's coffee specifically engineered for Camerons. They also hooked me up once and I did a video making a beat using only their coffee haha.
@BrewskaySA
3 жыл бұрын
@@VenusTheory Nice lol!
@rusmiller816
3 жыл бұрын
@@VenusTheory It's coffee specifically engineered for middle schoolers. 😋
@midhunm343
3 жыл бұрын
Superb iam from kerala
@VenusTheory
3 жыл бұрын
🙌
@midhunm343
3 жыл бұрын
@@VenusTheory Bro how is mixcraft for professional use
@kimmolaine665
2 жыл бұрын
Have You tried to import custom wavetables into Falcon? I'm having troubles for creating/importing them: either Falcon doesn't import them at all, or they are imported without any movement, like Falcon is importing one slice many times
@foria6248
3 жыл бұрын
Hey man . Do ASMR vid3o 😂
@VenusTheory
3 жыл бұрын
Maybe as a Christmas special?
@samplehero1200
3 жыл бұрын
Gonna use this with vitals resynthesize wavetable thanks
@janbicker638
3 жыл бұрын
Hi! Thanks for your great videos. Could you explain how one can create and import such custom wavetables in Falcon? It does not seem to be that easy there. Thanks!
@janbicker638
3 жыл бұрын
Nevermind. Found synthtech.com/waveedit/ . Which is a pretty awesome piece of software for creating custom wavetables.
@VenusTheory
3 жыл бұрын
Yo! It's a little bit tricky, but perhaps I could do a video in the future on that. Quick explanation: - Download Surge (surge-synth-team.org/) - Create a wavetable - Drag into Surge - Export from Surge - Find the file, move to your Falcon folder (example on Windows C:\Users\YourName\Documents\UVI\Falcon\User Data\Wavetable) - Add _1024 to the end of the name of the file (example: badass_1024.wav)
@janbicker638
3 жыл бұрын
@@VenusTheory Thanks! Wasn't aware of Surge. It is also a nice workaround. :-)
@SoundAuthor
3 жыл бұрын
Wondering if you can make a similar tutorial for Vital since it has a powerful wavetable editor.
@mentalpug7669
3 жыл бұрын
this method does not work with Pigments...can you adapt it ? When importing in Pigments, it sounds really bad. Serum too...i tried every importing options. It probably work in Rapid (but i don`t have it).. different resample engine or something. I tried Pigments, Serum and ANA2...sounds bad. Is there a way to make it work in these synts? Thank you.
@VenusTheory
3 жыл бұрын
Yo! Pigments is a little bit tricker. One easy way to make wavetables for Pigments though is to follow this process and import the waveform to Surge (free, download at: surge-synth-team.org/) then export from Surge. Once you do that you can import to Pigments and it should work no problem! As for Serum, make sure to open the wavetable editor and in the formula area enter the note you used (C0 for example) and Serum will then interpret it a lot better. As for anything else, the Surge trick above should help!
@mentalpug7669
3 жыл бұрын
@@VenusTheory thank you for looking into this but so far i could not make it work..the Surge method, i mean. I import the wave into it and when i play one note it plays the whole wavetable as if i use Morph slider...it`s like it`s playing the whole wavetable without any modulation applied on Morph. If you are curious about this, just try any Pigments factory wavetable and you`ll see what i mean. Serum and Ana2 factory wavetables work just fine in Surge (but they work just fine in Pigments too so if I would manage to make waves exactly like them i wouldn`t need Surge). So, i don`t know what is the difference between these tables (Pigments ones and ANA2`s or Serum`s) but i would surely like to find out somehow..Thank you.
@gregsLyrics
Жыл бұрын
gibberish
@ChillCash
3 жыл бұрын
Enough with the coffee man jeez take a break while you still can. What if you wanted to watch a video and the guy did drugs every time the video started?
Пікірлер: 87