Always nice to see a well presented video on modding a controller 😎 At 7.40 them two little tabs, if you position your hand to give a bit leverages on the cover, it'll pop the back off so much easier, hate to imagine how many times I've done these controllers and hopeful helped many people on the way 😁
@metroknight_
9 ай бұрын
I used the same Spider-Man controller. Thanks for walking me through the process. It works perfectly
@GamerGear
9 ай бұрын
Love to hear it! Enjoy. It's been my go to cause it looks so awesome lol
@angeldelgado8221
2 ай бұрын
So i just install it and ready to go, no app
@MariusHeier1
11 ай бұрын
Great video! Keep it up. 🎉
@GamerGear
11 ай бұрын
I appreciate you 🫡
@Jellyfish474
Жыл бұрын
This seems like such a cool channel though i am a bit scared to mod my controller so extensively
@GamerGear
Жыл бұрын
Thanks for the kind words! I admit it can seem daunting but what you actually do is pretty easy. It's when you want to solder the extra parts to the controller that it takes REAL know how. This is just following along!
@Akeldama626
9 ай бұрын
When I done one of mine …if you place a piece of tape on the back buttons that fall out it will hold them into place …… also if you are not soldering you don’t need to remove those 2 screws on the ends by the rumble
@justnitro7902
10 ай бұрын
Thx , i did the same and it work for me 030
@GamerGear
10 ай бұрын
Love to hear it! I just really enjoy the added functionality and hope you do as well 👍
@justnitro7902
10 ай бұрын
@@GamerGear any idea how i désactive x and o , in controller 🎮 i want just use the paddle
@Allard888
4 ай бұрын
thank you brother
@Albertmars32
8 ай бұрын
Did they make new revisions? I don't remember it being this easy, before we had to cut shit and use ribbon connectors that were provided with the kit
@GamerGear
8 ай бұрын
The older version was a bit harder and before that probably even harder. This is really easy as long as you follow the steps.
@seanhall4098
Ай бұрын
I would think if you already have the two back buttons installed all you would need it the other board and the back cover, am I wrong ?
@sebastianrede5577
10 ай бұрын
Cool video. Im curious how this mod compares to the dual sense edge or the scuf custom controller.
@GamerGear
10 ай бұрын
It's a bare bones version of those since those add more features like short throw triggers.
@carvalho7davi
9 ай бұрын
Hello, Great video by the way! Is it possible to charge them using the official playstation charging station with these remapped controllers?
@GamerGear
9 ай бұрын
Not by itself, no. You'd need this adapter: amzn.to/41Afr6z
@savibb9830
8 ай бұрын
That claw grip is an optimal way but damn is it very uncomfortable I much prefer having back buttons cause my hands feel better w them lol😭
@nathandavis2077
8 ай бұрын
been playing claw 3 years now and the pain and uncomfortable feeling never leaves you just learn to deal with it. looking into other options fs
@donaldnguyen19
7 ай бұрын
I play claw and it feels fine. At first, your hands get a little sorr because its not used to clicking button like that, but once you’re used to it, theres no pain, at least for me
@LawrenceWilliams-m9g
Жыл бұрын
Lol I want to do this so bad but don’t want to fuck it up 😂🎮
@DontTryBlix
10 ай бұрын
Ima buy this for my 030 ps5 controller and see if it works I hope it does 😢😢
@GamerGear
10 ай бұрын
Do it!
@mahirulislam883
Ай бұрын
should i get the metal or plastic paddles?
@TheBlakeCox
5 ай бұрын
my backpeice to cover the motherboard won't fit pn, can you think of any really why?
@llnosama9205
5 ай бұрын
ive had one for 2 months now but now im having to click it more then once for it to register or work but it works fine when not playing a game has anyone els have this problem
@JustinJusyin-bl7qz
7 ай бұрын
I like it
@Crazy2fan23
Жыл бұрын
Any cheap alternatives for 2 buttons perhaps?
@speakthetruth3684
11 ай бұрын
Yes but it'll require some soldering and a few other tools like a hot glue gun. You want to buy remapper flex board, kynar wire 30awg, tact buttons and some caps.
@bkid1776
8 ай бұрын
is the extremerate kit fine to use on mw3. ik its just back buttons, and this is a stupid question but since u install it yourself im just making sure they dont thnk its a mod or something. So can u use this ban free on call of duty. I ordered them and i wanna start using them but i just want to double check all there stuff is fine with the new game
@GamerGear
8 ай бұрын
I honestly couldn't tell you but it's shouldn't because it's only adding buttons like a regular pro controller. There's no extra features beyond that. It seems many people use it for CoD based on looking at the extreme rate subreddit.
@mf_dva
6 ай бұрын
14:30 My strip doesn't have a sticky newe the too. Only the wide one in the corner.
@CaptainDug
5 ай бұрын
Mine to did you find a solution
@mf_dva
5 ай бұрын
@@CaptainDug I think the one that guy has is a slightly different model
@OfficialDDelete
8 ай бұрын
I use the same spider man controller i have been searching for a video with my same controller i need more red in the controller but i dont like the red grip in the starting but i dont mind black can you tell me if rise 2 with 2 back buttons is better or 4 is better
@GamerGear
8 ай бұрын
They are the same, only difference is the buttons. I personally prefer 4 buttons.
@OfficialDDelete
8 ай бұрын
@@GamerGear thanks
@Bobisfunny3887
9 ай бұрын
Will it still fit in the ps5 dock
@GamerGear
9 ай бұрын
Not sure which dock you're talking about? The official charging dock? Most likely not but this company does sell an extender for charging. amzn.to/3NsfrPW
@TheGameOverBoys
10 ай бұрын
i bought the version with only 2 paddles, can i still use this video?
@GamerGear
10 ай бұрын
No, there will be some differences and I couldn't tell you exactly where the variances are.
@Aaron6791ae
8 ай бұрын
Yes very strange decision by ps to only include 2 back buttons, when all other controllers in this price range come with four.
@GamerGear
8 ай бұрын
Big miss for many for sure. The rest of the controller is good though.
@darthmaul3067
8 ай бұрын
Does this work with 040?
@GamerGear
8 ай бұрын
No but they have one that does and there's instructions floating around that show you how to install it because it is different install steps.
man for the back two buttons that you attach at the end.. im having the hardest time snapping the bottom part in.. how the hell did you do it you didnt even show
@JohnnyKayOh
6 ай бұрын
I had trouble many times yesterday too with trying to snap the back buttons onto the backcase until i realized at 20:30 that i didn't put that board correctly slotted there so the lower part of the board was kinda elevated up from its place and i screwed it in and that was how i could not snap the back buttons in. I fixed it and it works
@aThomy
7 ай бұрын
Thats tooooo much for 1.10KD ratio :/ …
@burnabykrompel7072
Жыл бұрын
'Promo sm'
@hernanzarazua6406
7 ай бұрын
Yea we’re here for the PlayStation controller..could care less bout your Xbox controller
@Non8bitgamer
Ай бұрын
ok and
@S__team69
9 ай бұрын
DO NOT BUY THIS KIT. mine came without the adhesive at 14:18, it’s impossible to do without. Now my controller is completely ruined as well. DONT BUY THIS THEY DONT QUALITY CONTROL CHECK ANYTHING
@S__team69
9 ай бұрын
Good video tho. But definitely don’t fucking buy it.
@ttl-_admist8444
8 ай бұрын
Mind didnt come with it either what do i do
@myfunsquad6357
Ай бұрын
@@S__team69prob was The factory that forgot
@alansakaith4805
11 күн бұрын
Easy fix get some adhesive 😂
@kahtanalobaidi1550
10 ай бұрын
Mine turned into a rapidly flashing light I don’t know what to do
@GamerGear
10 ай бұрын
Woah! I don't know what that could be but luckily ExtremeRate has a full support page to help. Check it out here: extremerate.com/pages/extremerate-ps5-controller-rise-remap-kit-faqs#:~:text=If%20the%20red%20light%20flashes,the%20Remap%20PCB%20is%20broken.
Пікірлер: 63